Weiss FT PLUS
WEISS FT Plus is a 'wet look' colour enhancer for natural stone and concrete pavements. As an added benefit, FT Plus also protects pavements against grease, oil, fast food staining, tyre marks and everyday grime.
WEISS FT Plus gives a consistent appearance and uniform colouration during both wet and dry conditions. It also provides protection against staining by grease, oil, fats, fast food, tyre rubber, footwear marks and normal pavement grime and is also water repellent.
WEISS FT Plus must be applied to thoroughly dry paving. Please refer to the ‘How To Use’ section. If you are at all unsure, please contact us before using this product.Enhanced and more consistent colorationLong term e ectivenessHighly oil & water repellentNo reduction in slip resistance
How It Works
FT Plus bonds tenaciously within the pores beneth a pavement surface, forming a breathable, highly resilient subsurface system which is resistant to staining and which reflects light in a way that makes a different appearance of wet and dry surfaces.
Regular cleaning with Weiss Grundreiniger then completes a sustainable regime.
How To Use.
WEISS FT Plus is applied to the upper surface of clean, dry paving elements, to enhance colour giving a 'wet look' and also to protect against mild staining.Apply when surface is between 5-25°C and in dry weather conditions.Do not dilute. Mix well before use. Ensure the surface is dry and clean.Apply evenly using a spray, brush, roller or mop until no more is absorbed and the surface appears wet and glossy. If applying a second coat to a highly absorbent surface, do so within a maximum of 20 minutes.Remove excess product with a cloth or squeegee before it dries on to the surface.Treated surfaces may be walked on after 4-6 hours and protected against rain and soiling for 24 hours. Full protection will develop within 2-4 days
Note: Newly constructed paving should be allowed to thoroughly dry for 4 to 6 weeks before applying FT Plus. For existing installations, the entire paving, not just the surface, should be uniformly and thoroughly dry.
If applying a second coat to a highly absorbent surface, do so within a maximum of 20 minutes.
Remove excess product with a cloth or squeegee before it dries on to the surface.
Approximately 1-20 m² per 1 litre dependent upon porosity of surface.
Highly absorbent sandstone: ~ 1-5 m² per 1 litre
Honed granite: ~15-20 m² per 1 litre
pH Value: n/a
Density: 1.0 g/cm³ at 20°C
FT Plus will keep for 6 months from the date of delivery if stored in original packaging and kept frost free.
We strongly recommend treating a trial area first to ensure you are satisfied with the result prior to treating a larger area. Sample bottles for this purpose are available online at the following web site:
Further information on this product can be obtained from the following web site: