Details about  Yamaha EMX5000/12 Powered Mixer with Dual Digital Effects

I bought this mixer new some years ago from Fret Music store in Southampton but have recently updated to active speakers which have proved to be reliable, so it is now time to sell all the equipment I no longer use. This mixer has been 100% reliable and still works well. It has been well gigged for a few years so shows signs of wear. It has some cosmetic marks and scratches but does not affect the workings in any way. Please read below for all specs and features. Unfortunately I did not keep the box so would prefer collection with cash. I will however post and make sure it is securely packed. Comes with Instruction manual and is PAT Tested. Because of postage costs it will have to be UK BIDDERS Only please. Good Luck.

 Technical Info Features
• The EMX5000-12 provides versatile inputs, such as two stereo input channels and two stereo sub inputs, as well as 8(EMX5000-12) monaural input channels compatible with mic/line signals. The mixer also has ample power, with a maximum output of 500 W+500 W (1000 W with bridge connection), and is suitable for a wide
range of applications from installed systems to smallscale PA systems.

• A two-channel power amp is built-in. The signals output
to speakers can be selected as stereo (ST L-R),
AUX+monaural (AUX 1- MONO), two AUX (AUX1-
AUX2) or monaural (bridge connection).
• In addition to the speaker output jacks, two stereo
output channels for line-level signals, two AUX output
channels, two effect outputs, and one monaural output
are provided. You can easily expand the system by
adding a power amplifier or powered speakers.
• The EMX5000-12 also has a PHONES
jack, which is very useful for checking the sound. You
can monitor only a specific channel or bus signal
through the headphones.
• Each amp contains a limiter circuit to prevent distortion
due to excessive input levels.
• A maximum output select switch lets you switch the
maximum output of the amp between three levels.
This lets you adjust the maximum output of the internal
power amp as appropriate for the size of the room
or the input capacity of the speakers.
• Two multi-effect units are built-in, each providing sixteen
types of effect equivalent in quality to the
acclaimed Yamaha SPX series of multi-effect units.
The effects can be used to add reverb or ambience to
vocals or instruments. The sixteen types (provided by
each of the two effect units) include TAP DELAY,
which lets you easily adjust the delay time.
• The EMX5000-12 has implemented“EEEngine”,

Yamaha’s epochal amp drive technology
to create an unrivaled high-efficiency drive.
The EEEngine’s energy-saver/low-heat-generation
design has reduced power consumption to 50% or
less, and reduced heat generation to 35% or less (in
field applications, compared to Yamaha’s previous
models), and has lead to a reduction in energy cost
and to less-restrictive installation requirements related
to heat generation.

Maximum Output Power @0.5% THD at 1kHz:
500W+500W/4ohms
325W+325W/8ohms
1000W/8ohms bridge

Input Connectors:
CH1-8: XLR and TRS Phone
CH9/10, 11/12: 2 x Phones and 2 x RCA Phone

Channel Inserts: 8 (mono channels)

EQ (Mono CH)
High: 10kHs shelving
Mid: 250Hz-5kHz peaking
Low: 100Hz shelving

EQ (Stereo CH)
High: 10kHs shelving
Mid: 2.5kHz peaking
Low: 100Hz shelving

Aux Sends: 4 (2 Aux (pre/Post), 2 Effect

Phantom Power: +48V

Graphic Equalizer: 9-band (63, 125, 250, 500, 1k, 2k, 4k, 8k 16k Hz)

Digital Effects: SPX Digital Multi Effector (24-bit AD/DA, 32-bit Internal Processing)

Effect1 (16 programs):
Reverb hall
Reverb room
Reverb plate
Reverb vocal 1
Reverb vocal 2
Vocal echo 1
Vocal echo 2
Delay 1
Delay 2
Mod delay
Reverse gate
Pitch change
Chorus
Phaser
Radio voice
Tremolo

Effect2 (16 programs):
Reverb hall
Reverb room
Reverb plate
Reverb vocal 1
Reverb vocal 2
Vocal echo 1
Vocal echo 2
Delay 1
Delay 2
Early ref.
Gate reverb
Vocal doubler
Symphonic
Flange
Distortion
Tape delay

Power Amp. Mode:
ST L + ST R
Aux1 + Mono
Aux1 + Aux2

Power Select Switch: 500W/300W/100W

Meters: 2 x 13 points

Yamaha Speaker Processing: Yes

Low Pass Filter: Yes (Mono Out)

Stand-By Switch: Yes

Lamp Connector: Yes (XLR 3 pins)

Foot Switch: Effect On/Off, TAP

Dimensions (W x H x D): 26-7/8 x 6-1/4 x 213/16 in.

Weight: 41.9 lbs.