Details about carvin pro bass rig amp and cabsSee original listing
12 Jul, 2014 21:17:39 BST
[ 0 bids ]
redruth, Cornwall, United Kingdom
Used: An item that has been previously used. The item may have some signs of cosmetic wear, but is fully ... Read moreabout the condition
Here For sale is my carvin bass rig which consists of a 1000w amp that can be used via the crossover to power the two cabs and send different frequencies to each cab (each with it's own volume control), A 2 x 10 cab with adjustable horn, A 1 x 18 bass reflex cab. Also there is a korg digital tunner and a strip light, all encased in a 4 x U flight case.
The cabs come complete with custom made waterproof covers and the 1 x 18 has heavy duty casters.
The R 1000 amp specs:-
Output Power :- 8 ohms - 225/225 w
4 ohms - 350/350 w
2 ohms - 500/500 w
8 ohms Bridged - 700 w
4 ohms Bridged - 1000 w
Input impedance :- ( passive input ) - 1M ohms
:- ( active input ) - 200K ohms
Main EQ :- low +/- 12db @ 100Hz
Mid Sweep +/- 12db @ 200Hz-2KHz
High +/- 12db @ 8KHz
Graphic EQ Freq :- 50, 80, 125, 250, 500, 800, 1.3k, 2.6k, 5k.
Crossover :- 12db per octave sweepable 200HZ to 2KHZ
Size :- H-3.5", W-19", D-10"
Weight :- 36 lbs (without flight case)
The BR210 cab specs:-
Frequency responce :- 64HZ to 20KHZ
Low end response-10DB :- 50HZ
1" Titanium horn driver ( adjustable ), with protection
Main drivers :- 2 x 10"
Power handling :- 400 watts
Nominal impedance :- 4 ohms
Size :- W-23.5", D-18.25", H-17.5"
Weight :- 43 lbs
The BR118 cab specs:-
Frequency responce :- 38HZ to 2KHZ
Low end responce-10DB :- 30HZ
Main driver :- 1 x 18"
Power handling :- 800 watts
Nominal impedance :- 4 ohms
Size :- W-23.5", D-18.25", H-25.5"
Weight :- 62 lbs
I've had the rig for about 5 years but not used for the last two and half years due to ill health (the reason for selling the gear).
I used a musicman stingray bass and a wawrick jassman bass through it and both sounded fantastic. I used the whole rig with the crossover active at larger gigs and just the amp and 210 cab on full range at small gigs and rehersals.
The nice feature i liked about this rig is the ability to send a different frequency to each cab and different volume levels to each cab( each volume control has its own clip light).
There is a 'blend' knob that blends the hybrid 12 ax7 tube pre amp with the normal pre amp to give a 'warmer' sound.
There is a 3 band shape EQ as well as the main 9 band EQ that boosts the low,mid or high frequency's.
There is a 2 knob compressor(threshhold & ratio),the threshold controls the point where the compressor kicks in and the ratio controls the amount of compression once the threshold has been reached.
The noise gate is usefull to cut out unwanted pickup noise and when set only lets the sound out when the bass is played.
There is also a headphone output on the face of the amp, so easy to get at.
The Korg Tunner is the DTR-1 digital one with a large note indicator as well as an led meter, cable check jack, a mute switch and indicator, there is also an input at the rear,( i used a foot switch to switch the signal from the bass to the amp input then to the tunner input and back again).
The rackmount striplight is a 1 u unit that lights up the amp on dark stages. It can be switched on or off, and the colour can even be changed.
All of the gear is in really good condition and everything works.
The twin heavy duty speaker leads are included in the sale as is the power lead (a 4 way extension built into the rear of the flight case that powers the amp,tunner and light ) so only one power lead to plug into the venue wall.
Carvin gear is made in USA and does not come up for sale very often in this coutry, so grab it while you can.
I only accept PayPal, so that the payment is secure and safe. So make sure you are using PayPal before you bid/purchase
If you have any questions, please don't hesitate to ask. My feedback shows my good communication between me and other eBay users/customers