NEW METAL DETECTOR XJ9 3050 TREASURE HUNTER

One of Treasure Hunters newest innovations. The Treasure Hunter XJ9-3050 is Treasure Hunters top of the line model. This detector was designed for the advanced user that is serious about treasure hunting.  The 3050 has an amazing combination of technology to make it truly second to none among its peers. The 3050 has Treasure Hunters patented multi-frequency deep search technology found only in Treasure Hunter 3019, and XJ9-3050 metal detectors. This model is equipped with a powerful 32 bit Z-TEX Computer Microprocessor for increased depth and discrimination. The large LCD screen will visually indentify the target, the depth of the target, and pinpoint the target. This detector can achieve depths of 30cm (12") for a coin the size of a US quarter. Can detect a silver dollar at 16" depth. At the same time, this detector will tell the difference between an old wheat penny from the new zinc type of penny. This detector uses multi-frequency technology to achieve greater depths and increased discrimination. With the multi-frequency technology the XJ9-3050 can recover coins, relics, treasure as well as gold nuggets at greater depths than ever before. This turn on and go fully automatic advanced treasure hunting machine has already left a huge impression on the metal detecting community.

Modes of operation:

1) All Metals Mode: This mode is the high sensitivity and no discrimination mode and any metal item will be detected. The sensitivity is completely adjustable in this mode. The automatic ground balance can be used in this mode, or for advanced use, the ground balancing can be manually adjusted.  Motion is not required in this mode.

2) Motion Discrimination: This is probably the most commonly used discrimination mode. This is the motion detecting mode and the detector will discriminate with different audible tones and also will identify the target on the large LCD screen. The detector will also give the depth of the target on the screen. The ground balance is automatic in this mode and the sensitivity and discrimination are fully adjustable.

3) Automatic Notch Filter: The 3050 deep search detector comes with pre-set programming to search for certain targets. The detector can be set to auto-notch for a specific target like gold rings and then it will only identify gold rings and other targets within the specific phase response of gold rings. The ground balance is automatic in this mode, and the sensitivity is fully adjustable.

4) Selective Notch Filter: The discrimination notch can be manually set to find any specifically desired target. The notch can be set so that the detector can find only 1/2 dollars, or only silver dollars, or only gold nuggets, or the desired relics, etc.... The possibilities are endless. The ground balance is automatic, or manual and the sensitivity is adjustable.

5) Deep Search with Surface Elimination: This setting is for deep searching and ignoring trash on the surface. It can be used in combination with any of the modes above and is for the hard to recover, or previously missed targets. This feature can be a very powerful treasure hunting tool when combined with the motion discrimination mode, or the notch filters. Using this feature, the 3019 can become a highly specialized tool set to find only gold nuggets at depths of up to 12".

6) Pinpointing mode: Motion is not required in this mode. The detector will give off a steady tone that will increase as you get closer to the target. The LCD will also indicate the location of the target. This mode can use the automatic ground balance, or ground balance can be manually adjusted or finely tuned for advanced pinpointing. Sensitivity and discrimination is fully adjustable in this mode.

This detector has all the great functions of the beloved 3019 with a slightly more powerful on-board computer to increase accuracy of discrimination. The XJ9-3050 has all these high technology features like multi-frequency detection, increased depth, pinpointing, surface elimination, improved notch discrimination capabilities, and much more. This detector has all the features and depth of the 3019 with the increased discrimination provided by the Z-TEX computer microprocessor. This detector gives a unique combination of depth and functionality that simply can not be found with any other detector. Please see the comparison with the Garret Ace 250, and Bounty Hunter Time Ranger at the bottom of this page. This detector uses NASA space age carbon and fiberglass lower stem with unbreakable non-metallic nylon connecting hardware to ensure the sensitivity and accuracy of the unit will not be compromised. This is Treasure Hunters premium deep search metal detector.

What is Target ID and how does it work?

Treasure Hunters Patented Target ID circuitry is a very accurate measure of the target's phase response. But unfortunately some targets have identical, or nearly so, target responses. That is why you may lose a few good gold rings if you believe your ID is correct each time it tells you the target is a pull-tab. The ID is just another form of information that you, the operator, must interpret before deciding whether you will dig the target. But Fortunately, Treasure Hunters Target ID is from top of the line circuitry and the best Target ID accurate at depths of 12" for a coin and 16" for a good size ring (3019 and 3050 deep search models only). As you can see from the picture of the LCD above, the 3050 will tell you just how likely your target is to be a gold ring if it is in the range. Don't forget, your treasure Hunter 3050 also has target depth indication.