Alpine Car Amplifiers

EQ (Equalizer): 0 to 12dB, fc=50Hz. Amplifier Type: Class-D (Digital). Frequency Response ( 0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz. Board Circuitry: S.T.A.R. Circuit. Bass EQ: Bass EQ Function.

Total Max Power: 640W. 4-channel PMX amplifier (bridgeable into 3 or 2 channels). EQ (Equalizer): Bass EQ Fixed Frequency 50 Hz _ Selectable Gain 0/ 6/ 12 dB (3/4ch). Speaker Impedance: 4 or 2 Ω. Per Channel into 4ohms (≤1%THD N): 4 x 50W.

This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. Total Max Power: 600W. Car Audo Direct Outlet - FLI Trap Active 12 Twin Bass Box Sub Car Subwoofer inc Amp Amplifier - 2400 Watt.

This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to 12dB (3/4 Ch only).

Bought some time ago and removed when I bought a new car. No need for it now. Good: full working order and even though a few years old, functions perfectly and is still powerful by today’s standards. Bad: no box or booklets. Also missing the side corner panels which give it the pretty finish. If you need to wire to speaker input instead of rca, you will need adapters which are about £10. https://www.crutchfield.com/S-fUiv39HAYET/p_500MRPM850/Alpine-MRP-M850.html

The potential of this amp is unbelievable at 600W RMS with 1500W max! ALPINE PDX 1.600 MONO DIGITAL AMPLIFIER. 1500W MAX Power. 1 x 600W RMS (2ohms, 14.4V, 1% THD). 1 x 600W RMS (4ohms, 14.4V, 1% THD).

The alpine v12 series mrv-f540 is a 4-channel amplifier with fast mosfet power supplies. The internal bass engine provides built-in crossovers for tuning the amplified frequencies. For sale is my alpine v12 amp model Mrv-f540.

300 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode). The PDX-4.150 4-channel amplifier supplies 150 watts of full-range power to each channel, plenty of power for the most demanding component speaker systems or most subs.

Alpine 4ch amplifier, in full working order.

Part number: 8379376. Removed from: BMW X5 E53 2004. Item: Audio amplifier.

Car amplifier as per the title. Bike Brakes. Under our BrakemastersTM trading arm, we are UK and world leaders in motorcycle brake caliper rebuild services and seal kits. Specialising in motorcycle brakes for years, we have developed an unrivalled range of components and application knowledge.

Amplifier Type: Class-D (Digital). Board Circuitry: S.T.A.R. Circuit. Channel Design: 1 Channel (Mono). EQ (Equalizer): 0 to 12dB, fc=50Hz. Bass EQ: Bass EQ Function. Total Max Power: 2400 W. Remote Turn On: Remote Sensing Function (for Speaker Level Input).

Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Per Channel into 4ohms 4 x 50W. Per Channel into 2ohms 4 x 70W. 2 pair RCA pre-input. The Bass Junkies Car Audio team has been proudly serving car audio products since 1995.

For this reason each amp needs its own ID when more than one amp and the RACC are used. The Q value of the EQ curve is selectable between 1 and 3. Protection Circuitry: The protection circuitry guards against accidents and undesired operation.

This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. Alpine BBX-T600 Features Total Max Power: 300W. EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to 12dB.

Box included.

Item Condition:Item is in good working condition, has few marks / scratches. Part compatibility information OEM Part Number: Mrv-F540. Item for sale.

V12 Amplifier: This amplifier is part of Alpine's V12 series of amplifiers. Protection Circuitry: The protection circuitry guards against accidents and undesired operation. Front of Amplifier 1 x MRV-F540 (4 channel amp).

New

Dual internal error correction technology – which had previously only been available in the PDX and X-Power amplifiers, is now integrated in V-Power mono amplifiers. The audio input signal is analysed, compared, and corrected twice dynamically as the signal is processed through the amplifier.

Top end Pioneer Amplifier 50w x 4 Bridgeable. Rarely available in such nice condition. Bridgeable to run one Bass Unit should u wish!

Alpine BBX-T600, 300W 2 channel amplifier, used but in very good condition.

Crossover Frequency (LPF/HPF Selectable): Variable, 50 - 400Hz (-12dB/oct.). EQ (Equalizer): Bass EQ (fc=50Hz) 0 to 12dB. Alpine MRX-T15: 2/1 Channel Class-D Amplifier in perfect working order. It sounds Excellent both in stereo and bridged modes.

Working old school proper power

UK BIDDERS ONLY. UK BIDDERS ONLY. UK BIDDERS ONLY Alpine 2 channel bridgeable amplifier 250w rms used to power my subwoofer Fair to good condition with some mark's to all surfaces and little bit of paint missing in one corner (see last photo) Comes complete with hi/low lead input so you can connect to your original rear speaker wires. EXCELLENT WORKING ORDER FROM A QUALITY AUDIO MANUFACTURER HEAVY METAL SO SORRY ABOUT THE POSTAGE COSTS!!!!!! UK BIDDERS ONLY. UNDER 10 FEEDBACK MUST CONTACT ME FIRST NO EXCEPTIONS

MRP-T220 250W. Alpine Amplifier. Also sold with wiring kit!

Alpine V12 MRV-T420 Power Amplifier 1/2 channel. Clearing out the loft so it needs to go. Removed from my car about 5 years ago and was in perfect working order. No reserve price. Total Max. Power. .600W.

This is an Alpine 2/1 Channel Power Amplifier MRV-T301. Per Channel into 4 ohms.. 30W. Per Channel into 2 Ohms..50W. Per channel into 4 ohms..

Consider the bar raised. Crossover (CH3/4, HPF): 30 - 600 Hz, -12 dB/oct. Crossover (CH3/4, BPF): 30 - 600 Hz (HPF), 300 - 6kHz (LPF, x10), -12 dB/oct. Crossover (Subwoofer): 50 - 600 Hz, -24 dB/oct.

Bought some time ago and removed when I bought a new car. No need for it now. Good: full working order and even though a few years old, functions perfectly and is still powerful by today’s standards. Bad: no box or booklets. Also missing the side corner panels which give it the pretty finish. If you need to wire to speaker input instead of rca, you will need adapters which are about £10. https://www.crutchfield.com/S-g2eGNMRMy38/p_500MRPF550/Alpine-MRP-F550.html

Dolby Digital, DTS, and Dolby Pro Logic II processing built-in. THIS WILL ONLY WORK WITH AN ALPINE UNIT WITH AI-NET AND FIBRE OPTIC OUTPUT. All you have to do is add an Alpine compatible source unit, subs and speakers, and you can enjoy multi-channel sound with movies and music.

As in photos

Alpine mrv-f450 amplifier in good condition. I bought this new and had it professionally fitted into my van, very good quality sound. I removed the system when I sold the van. A few marks but nothing serious. Any questions please ask. Collection from Huddersfield.

Classic Alpine power amp. 2 channel 35w / bridgeable. Owned for many years and more recently kept in dry storage.See my other listings as identical  amp also available. Has signs of cosmetic wear but fully functional.

New

ALPINE MRPT220 2/1 CHANNEL AMPLIFIER 2 X 70 WATTS RMS. ……This part is new and never been used…….

This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system. Alpine BBX-F1200 Features Total Max Power: 600W. EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to 12dB (3/4 Ch only).

Alpine MRP-F600 amplifier 4 channel 4 x 150watts output complete with Cable's and plugs and also sony kicker sub woofer..

Alpine V12 AccuClass-D MRD. AMPLIFIER OUTPUT DETAILS. This amp has now been refurbished by NCR with all new components (£129). Alpine Electronics. Car Audio Type. 30 - 200 Hz. Low Pass Frequencies. 24 dB/octave.

Alpine 3523 2-Channel Bridgeable Power Amplifier. In VGC and perfect, full working order. Great for powering high quality loud speakers; such as high end 6x9's or sub's (when bridged).

4-channel PMX amplifier (bridgeable into 3 or 2 channels). Board Circuitry: STAR Circuitry. EQ (Equalizer): Bass EQ Fixed Frequency 50 Hz _ Selectable Gain 0/ 6/ 12 dB (3/4ch). General Amplifier Type: Class-A/B.