• Axminster Drill Guide Kit

    <p>Some of the best ideas are the simple ones. Combining a clear base with a vee groove and interchangeable steel bushes, this jig allows you to drill vertically and position it accurately on a flat surface or using the vee groove in the base on a corner, or centred on a cylinder or a sphere, both notoriously difficult shapes to drill into with any degree of accuracy. With metric bushes to suit drill sizes 4, 5, 6, 8,10 and 12mm.</p>.
    £10.61
    Click & Collect
    £2.95 postage
    Brand: Axminster
    582 sold
  • Blast Gate for 63mm Dust Extraction Kit

    <p>An extra Blast Gate for the 63mm dust extraction kit, to extend if required.</p>.
    £3.98
    Brand: Axminster
    £2.95 postage
    724 sold
  • Axminster Hose Adaptor 100mm - 50mm

    <p>This tough ABS moulded hose reducer/adaptor is just over 110mm tall. The large end is a 50mm long to take a 100mm (4") diameter extraction hose. The reducer tapers to a 30mm long by 50mm (2") diameter spigot.</p>.
    £2.40
    Brand: Axminster
    £2.95 postage
    219 sold
  • Big Mouth Dust Hood

    <p>A large rectangular funnel, 410 x 325mm and 270mm deep ending in a circular spigot to fit 100mm diameter hose. The Big Mouth Dust Hood will fit directly onto the Axminster Heavy Duty Variable Height Dust Extraction Hood (410073), providing a larger catchment area, or it can be used alone behind a radial arm saw or other machine with no specific extraction port.</p>.
    £14.00
    Click & Collect
    £2.95 postage
    Brand: Axminster
    427 sold
  • Axminster Drill Guide

    <p>Suitable for all mains drills with a 43mm diameter collar, these are convenient aids for accurate drilling of vertical holes. Typical applications are dowel drilling or kitchen door hinges, which need an accurately located and square recess. A vee groove in the base gives accurate location of round items. The guide rods can be set to protrude beyond the level of the base, so the guide can be used to automatically centre on an edge, very useful when undertaking tasks such as drilling a door in order to fit a lock for example.</p>.
    £17.75
    Click & Collect
    £2.95 postage
    Brand: Axminster
    338 sold
  • Axminster Aluminium Blastgate for 100mm Hose

    <p>Axminster Aluminium Blastgate for 100mm Hose</p>.
    £8.99
    Click & Collect
    ��2.95 postage
    Brand: Axminster
    358 sold
  • 100mm x 910mm Clear Pipe for 100mm Dust Extraction kit

    <p>An extra length of 100mm x 910mm clear tube for use with the 100mm wall mounted kit to extend it if required.</p>.
    £20.26
    Brand: Axminster
    £2.95 postage
  • Axminster Stepped Hose Adaptor 100mm - 25mm

    <p>A stepped ABS hose adaptor with 5 different sizes that can form perhaps 2 or more adaptors. Simply cut the section you require with a fine toothed saw. Diameters are 25mm, 50mm, 63mm, 75mm and 100mm (sizes stated are outside diameter).</p>.
    £4.00
    Brand: Axminster
    £2.95 postage
    138 sold
  • Axminster Hose Adaptor 100mm - 63mm

    <p>This tough ABS moulded hose reducer/adaptor is just over 110mm tall. The large end is a 50mm long to take a 100mm (4") diameter extraction hose. The reducer tapers to a 30mm long, 63mm (2.1/2") diameter spigot.</p>.
    £2.40
    Brand: Axminster
    £2.95 postage
    500 sold
  • Multiple Stepped Hose Adaptor

    <p>A stepped ABS hose adaptor with seven different sizes that can form perhaps two or more adaptors. Simply cut the section you require with a fine toothed saw. Diameters are 25mm, 50mm, 63mm, 75mm, 100mm, 125mm and 150mm (sizes stated are outside diameter).</p>.
    £4.99
    Brand: Axminster
    £2.95 postage
    587 sold
  • Diamond Cone Mortice Chisel Sharpener

    <p>Sharpening a mortice chisel significantly improves performance. We can recommend this pair of specially made diamond coated cones for most Taiwanese and Japanese mortice chisels, and Veritas square hole punches. A coarse grit cone gives an initial grind, followed by a finer honing cone to create a sharp even edge.</p>%0a<p>Instructions</p>%0a<p>Use the cones in a drill press or your morticer if you have a chuck adaptor (a handheld drill is neither suitable nor safe). Clamp the bit vertically and securely, or drill a hole in a block of wood the same diameter as the chisel’s shank. The chisel must be held firmly and perpendicular.</p>
    £4.45
    Brand: Axminster
    £2.95 postage
    232 sold
  • Axminster Non-Clogging Blast Gate with Mounting Bracket

    <p>Blast gates allow you to control the airflow between a single dust extractor and 2 or more machines. By closing one blast gate and opening another, you can direct the extraction to the machine in use and isolate the others from the system. This ensures maximum efficiency by focusing all available suction where you need it. </p>%0a<p>The slider of this improved design runs in a groove through the middle of the blast gate body. One side of the slider is solid; the other has a 100mm diameter hole. The result is a non-clogging, self-cleaning blast gate that closes fully when shut. </p>%0a<p>Another outstanding feature is the integral mounting bracket.</p>
    £7.60
    Click & Collect
    £2.95 postage
    Brand: Axminster
    396 sold
  • Axminster Workshop Edgebanding Trimmer

    <p>This Double Edge Trimmer is placed over the edge of the workpiece, squeezed to hold it in position and then slid down the length of the work in order to neatly trim off the waste material. The final finish can be achieved by a light wipe with a fine abrasive.</p>.
    £14.95
    Click & Collect
    £2.95 postage
    Brand: Axminster
    159 sold
  • Quick Release 100mm Hose Fixing Clip

    <p>These handy hose clips allow the quick changing of a 100mm dust extraction hose from one machine to another. Acting as a large spring and operated by one hand it could not be easier. Ideal for the hobby woodworker in a small workshop, now there is no excuse for not using your extractor. Supplied in a pack of two.</p>.
    £8.76
    Click & Collect
    £2.95 postage
    Brand: Axminster
    398 sold
  • 63mm Dust Extraction Kit

    <p>A ducting package complete with elbows, blast gates and adaptors for connecting up your machines to a workshop extractor. Simply fix a horizontal pipe to the wall or ceiling with the clips supplied and then take branch pipes to exactly where the extraction points are needed in the workshop, using the T junctions and 63mm flexible hose. Attach a vacuum extractor and away you go! The kit consists of 8 x 915mm lengths of tube (63mm diameter), 4 x tee joints, 3 x 45° joiners, 2 x 90° elbows, 16 x pipe joiners, 5 x plastic blast gates, 10 x wall clips and a 100mm to 63mm adaptor. A suitable hose for use with the dust extraction kit is the PVC Superflex hose which is available in 2.5m lengths (505003). If the kit does not have enough components then additional parts are available separately.</p>
    £115.98
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Jun 27
    59 sold
    Brand: Axminster
  • Axminster No.1 Dowelling Jig

    <p>Form either E or L joints in timber up to 32mm(1.1/4") thick. This aluminium extrusion jig slides on steel bars and the bushes are made from hardened steel and are replaceable. A clamp is provided on the main part of the jig for holding the timber during drilling and also a second clamp for securing the boards together whilst the position of the jig is being adjusted. Holes are drilled in both boards at the same setting so an accurate line-up guaranteeing. This jig produces an excellent result. Accommodates 6mm, 8mm and 10mm dowel holes. Supplied with hardened steel bushes for 6mm, 8mm and 10mm dowels.</p>.
    £42.96
    Top Rated Plus
    FAST & FREE
    Click & Collect
    46 sold
    Brand: Axminster
  • Planer Thicknesser Axminster AW128PT

    Planer Thicknesser Axminster AW128PT. Condition is Used.%0a<br>Great machine in good, used condition.%0a<br>2 sets spare knives, one sharpened and ready to go in.%0a<br>Collection only.
    £351.00
    13 bidsEnding Thursday at 4:15PM BST1d 5hCollection in personBrand: Axminster
  • Axminster 63mm Flex Form Hose Kit

    <p>A genuine problem solver, this kit consists of a length of 63mm diameter tough polypropylene 'Flex Form Hose', a narrow nozzle attachment and a wide mouth attachment. You can bend, twist and turn the concertina-like Flex Form Hose and it will stay put. It enables you to position the narrow nozzle or wide mouth attachment for a specific extraction task. The hose is rigid enough to hold position,but flexible enough to direct by hand. The kit gives you greater dust control accuracy around your workshop. With its shaped nozzles, this articulating hose lets you extract from where it’s most needed. Connect the hose to your vacuum dust extractor then tether it to your lathe or woodworking machine and you are ready to go.</p>
    £24.25
    Click & Collect
    £2.95 postage
    Brand: Axminster
  • Axminster Star Knob - Female M6

    <p>Axminster Star Knob - Female M6</p>.
    £1.94
    Brand: Axminster
    £2.95 postage
    76 sold
  • Axminster Woodturner's Universal Dust Hood

    <p>This dust hood is supplied with a clever articulated bracket system to allow it to be fitted to just about any lathe with a flat top or round bar bed. Fitted with a large 40-5 x 320mm hood tapering down to a 102mm spigot for connection to your dust extraction system. When connected to an extractor of at least 1,000m³/hr flow rate, this hood will work very well indeed. Because you can position it exactly where you need it, it is not obtrusive and will not interfere with your turning activities.</p>.
    £79.50
    Top Rated Plus
    FAST & FREE
    Click & CollectBrand: Axminster
  • New listingspindle moulder, axminster, tennoner, 240v, breaked, tilting spindle

    spindle moulder, axminster, tennoner, 240v, breaked, tilting spindle. Condition is Used. Dispatched with Other Courier (3 to 5 days).
    £500.00
    0 bids
    £120.00 postage
    Ending 2 Jul at 8:30PM BST6d 9hClick & CollectBrand: Axminster
  • Axminster Locking Lever - Female M8 Alloy

    <p>Axminster Locking Lever - Female M8 Alloy</p>.
    £2.30
    Brand: Axminster
    £2.95 postage
    83 sold
  • 63mm Dust Extraction Connectors

    63mm Dust Extraction Connectors . Dispatched with eBay delivery – Shutl 2-3 days.
    £9.99
    0 bids
    £2.79 postage
    Ending Saturday at 6:51PM BST3d 7h
    or Best Offer
    Click & CollectBrand: Axminster
  • Axminster Dowel Points (Pkt 4) - 8mm

    <p>Axminster Dowel Points (Pkt 4) - 8mm</p>.
    £1.48
    Brand: Axminster
    £2.95 postage
    91 sold
  • Guide Block Set

    <p>A collection of three very useful pressure pads, fitted with foam bases, that can be used to safely guide timber through a saw bench, planer or spindle moulder, keeping the fingers well clear of the sharp bits. They can also be used as handles on jigs where moving parts pass close to the blades or cutters. Used in either way they really will help to keep the fingers out of the line of fire. The set consists of two 150mm pads with different handle designs and a 300mm long one with a plane-style handle and knob.</p>.
    £14.65
    Click & Collect
    £2.95 postage
    Brand: Axminster
    52 sold
  • Axminster Standing Morticer with cabinet

    Axminster Standing Morticer with cabinet , in a good condition. Cash on collection from Whinmoor, Leeds. %0a<br>Thanks
    £295.00
    Collection in person
    or Best Offer
    Brand: Axminster
    14 watching
  • Axminster AWEDE 'Bag over Bag chip extractor with 1-micron fine filter cartridge

    Axminster AWEDE chip extractor for woodwork machines. I'll get a clean waste bag fitted before it's collected, and dispose of the current one. It has twin 100mm intakes, one of which can be blocked off if not required, while removing the twin 100mm intakes reveals a single 125mm alternative.
    £60.00
    19 bidsEnding Thursday at 4:05PM BST1d 4hCollection in personBrand: Axminster
  • Axminster 45 Degree Junction for 63mm Dust Extraction Kit

    <p>A 45° Junction for the 63mm dust extraction hose system. When used with a 45° elbow gives the smoothest air flow from a drop down.</p>.
    £5.15
    Click & Collect
    £2.95 postage
    Brand: Axminster
  • Axminster Star Knob - Female M8

    <p>Axminster Star Knob - Female M8</p>.
    £2.24
    Brand: Axminster
    £2.95 postage
    67 sold
  • Axminster Bench Top Edgebander

    <p>The Axminster Bench Top Edgebander is built to apply smooth flawless edgings, using banding pre-coated with hot melt adhesive. The heat source comes from a German made Steinel industrial heat gun with a variable temperature control from 100°C to 200°C, to suit different materials and feed rates. A large rear table supports a roll of banding, whilst the main work surface is laminated to ensure the work passes smoothly in front of the pressure roller. Both fences and banding guides are fully adjustable for applying banding up to 55mm wide. The Edgebander is fitted with a built in knife that cuts the banding a fraction over length prior to a final trim. Comes complete with spring loaded double edged hand trimmer.</p>.
    £295.97
    Top Rated Plus
    FAST & FREE
    Click & Collect
    21 sold
    Brand: Axminster
  • 100mm Dust Extraction Kit

    <p>A 100mm ducting kit with most items a home woodworker needs to connect up to 3 machines to an extractor. Comprising 8 X 910mm lengths of 100mm clear plastic duct, 2 X Y junctions, 2 X 90 degree elbows, 2 X 45 degree elbows, 3 x blast gates and 16 x joiners. A pack of 10 wall brackets with screws and wall plugs are included. All the items are available separately, enabling you to build a system exactly how you need it. Our other accessories such as the 990053 Y junction, 500181 Flanged Spigot and 200114 Big Mouth Dust Hood all fit this kit. The 510412 Earth Grounding Kit would be worth considering to protect yourself from possible static build up. This kit is exactly what the home workshop requires.</p>.
    £199.96
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Jun 27
    Only 1 left.
    Brand: Axminster
  • Fine dust extractor. ADE 2200. Axminster Power Tools. Collection only. PayPal.

    Fine dust extractor. ADE 2200. Axminster Power Tools.. Condition is Used. Fully working. Fitted with fine dust cartridge with cleaning handle on top. Also comes with never used fabric filter bag for coarse dust. Some reusable plastic sacks. 4m 100mm hose and a length of narrower house. Can be 1 * 150 outlet or 2 X 100 outlets. 1.5kw. 240v. Collection only once payment is received by PayPal. See my other listing for sliding table panel saw.
    £70.00
    1 bidEnding Sunday at 7:42PM BST4d 8hCollection in personBrand: Axminster
  • Axminster Locking Lever - Male M8 x 40mm Alloy

    <p>Axminster Locking Lever - Male M8 x 40mm Alloy</p>.
    £2.50
    Brand: Axminster
    £2.95 postage
  • Axminster ABS Joiner - 100mm Hose

    <p>Axminster ABS Joiner - 100mm Hose</p>.
    £3.85
    Brand: Axminster
    £2.95 postage
  • Axminster spindle moulder AW30 s and blocks and blades power feed

    Condition is Used. it has only done light work doing rebats in MDF.
    £492.00
    10 bidsEnding Thursday at 2:43PM BST1d 3hCollection in personBrand: Axminster
  • Morticing Chisel Sharpening Set

    <p>Sharpening chisels for morticing machines doesn't get much easier than this. Fit the multi-flute conical reamer with the appropriate size pilot piece, just a few turns removes a tiny amount of metal from the chisel's internal bevel. Using the fine diamond honing stone included with the kit touches up the outer faces of the chisel by removing any burrs thrown up by the reamer, it's as simple as that. A sharp chisel cuts cleaner and is far less prone to burning and, of course, puts far less strain on the morticing machine. It leaves the internal faces of the mortice smoother and cleaner making for a better fitting joint. This Axminster mortice chisel sharpening kit will fit most Taiwanese and Japanese mortice chisels metric and imperial sizes up to 12mm/1/2". N.B.</p>
    £38.45
    Top Rated Plus
    FAST & FREE
    Click & Collect
    44 sold
    Brand: Axminster
  • Axminster Dust Extraction Adaptor 100mm

    <p>Router table set-ups and some sawbenches can sometimes present extraction problems, with extraction often required from both above and below the table. This adaptor enables you to achieve this by having a 100mm flanged outlet with a 62mm inlet at the top. A cabinet or enclosure will be required to extract from with a hole made to accept the adaptor. When extraction is connected using a standard 100mm hose, a separate 63mm hose can then be attached to the top of the adaptor and connected to either a dust port on the router table fence or the crown guard of the saw bench. We are sure there must be many other dust extraction situations where this fitting would prove invaluable.</p>.
    £9.44
    Click & Collect
    £2.95 postage
    Brand: Axminster
    58 sold
  • Axminster Locking Lever - Male M12 x 63mm Alloy

    <p>Axminster Locking Lever - Male M12 x 63mm Alloy</p>.
    £4.80
    Brand: Axminster
    £2.95 postage
  • Axminster 6" x 12" Thicknesser (396N)

    Made by Axminster Power tool Centre. rule goes up 6" and the bed is 12" wide. All goods are sold as working or for spares or repairs as described.
    £210.00
    Collection in person
    20 watching
    Brand: Axminster
  • Light Duty Variable Height Extraction Hood

    <p>A simple dust extraction hood mounted on an adjustable height stand. Very useful for situations where direct connection to a machine is not possible, such as woodturning. Having a robust ABS hood fastened to a 100mm diameter metal tube, this is easily connected to flexible extraction hose leading from your extraction system. The steel stand gives a useful height range from 750-1,200mm and has 3 feet, so no wobbles on your uneven workshop floor! The hood has an inlet of 320 x 35mm creating a good airflow, an extractor of at least 750m3/hour is recommended. Will not accept Big mouth dust hood (200114)</p>.
    £39.96
    Top Rated Plus
    FAST & FREE
    Click & CollectBrand: Axminster
  • Axminster 4m x 63mm Extraction Hose Kit

    <p>Axminster 4m x 63mm Extraction Hose Kit</p>.
    £64.50
    Top Rated Plus
    FAST & FREE
    Click & Collect
    12 watching
    Brand: Axminster
  • Axminster Heavy Duty Mobile Base - 540kg

    <p>In every workshop, space is at a premium. The ability to move a piece of equipment into a convenient working position or park it out of the way is a huge bonus. </p>%0a<p>Our heavy duty mobile base has two fixed wheels at the rear and features two castoring wheels at the front. It is a practical method for manoeuvring heavy machines into position safely and with ease. Once the machine is in position, screw-down feet raise the castoring front wheels off the floor, allowing the base to rest securely on the floor. The Axminster Heavy Duty Mobile Base takes the strain out of moving machinery around your workshop.</p>
    £99.96
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Jun 27Brand: Axminster
  • Axminster Stayput Extraction Hose - 55mm x 1m

    <p>Axminster Stayput Extraction Hose - 55mm x 1m</p>.
    £20.95
    Brand: Axminster
    £2.95 postage
  • Axminster Stayput Extraction Hose - 75mm x 1m

    <p>Axminster Stayput Extraction Hose - 75mm x 1m</p>.
    £25.99
    Brand: Axminster
    £2.95 postage
    3 watching
  • Axminster Bushes for No.1 Dowelling Jig

    <p>Replacement bushes for the Axminster No.1 dowelling jig.</p>.
    £14.46
    Click & Collect
    £2.95 postage
    Brand: Axminster
    24 watching
  • Axminster Heavy Duty Mobile Base - 400kg

    <p>In every workshop, space is at a premium. The ability to move a piece of equipment into a convenient working position or park it out of the way is a huge bonus. </p>%0a<p>Our heavy duty mobile base has two fixed wheels at the rear and features two castoring wheels at the front. It is a practical method for manoeuvring heavy machines into position safely and with ease. Once the machine is in position, screw-down feet raise the castoring front wheels off the floor, allowing the base to rest securely on the floor. The Axminster Heavy Duty Mobile Base takes the strain out of moving machinery around your workshop.</p>
    £79.96
    Top Rated Plus
    FAST & FREE
    Click & CollectBrand: Axminster
  • Floor Gulper Attachment

    <p>Gulp up all your shavings and dust with this handy attachment. Simply connect it to a length of 100mm flexible hose linked into your workshop extractor and clean up! With a convenient handle and castor wheels you will whizz round your workshop in no time. Supplied complete with a blastgate, you can leave this rigged up permamently. Requires an extractor size of 1,000m³/hr as a minimum to work effectively, so many small, portable extractors are quite suitable.</p>.
    £48.10
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Jun 27
    11 watching
    Brand: Axminster

Got one to sell?

Get it in front of 17+ million UK buyers.

Tell us what you think - opens in new window or tab