Graflex

Here we have a full size lightsaber chassis similar to the Graflex Flash.

~Lightsaber Prop~. A full sized stainless lightsaber prop. This Lightsaber is an important piece of galactic history. Spare crystals.

This is for two screws.

This is the most accurate Graflex bladeholder from Solos Hold. Designed to fit a vintage Graflex or replica. The only 7/8” blade option on the market. I bought this new at the start of the year but I eventually decided to go with a one inch option. It is as new and comes with the parts to make a spring loaded blade plug. Also included in this sale is a KR sabers silver and black 7/8” blade plug. Shipping is £5.50 Thank you for looking.

Mint condition, literally not got it out the box for more then a minute. -Fits 1" Polycarbonate blade not included. -Main power switch and Aux switch. -2W 8ohm speakers.

Here I am doing a service do get the raw smooth finish on your replica glass eye's.

Graflex flash with reflector, adaptor to take the smaller and more readily available bulbs, cables, including the cable to attach to the Graflex Speed bipost which syncs with the focal plane shutter and a selection of bulbs. Everything seen in the picture.

Graflex flash. Ilford HP3 film. Ilford Sportilux. Agfa flash and case. Minolta Duo-fit with case. Lots have original boxes or leather cases. Kodak flash holder type B boxed. Ticky Star.

Star Wars - ANH, TESB, TFA und TLJ. Perfekt um aus entweder einer originalen oder einer Replica Graflex Flashgun ein Lichtschwertumbau durchzuführen. Ich biete noch weitere originalgetreue, nachgebildete Lichtschwertteile für einen solchen Umbau an.

Here is a full size Replica of Rey’s Lightsaber from Star Wars Force Awakens/The last Jedi. This is a kit that can be modified with a soundboard and blade(not included) can also be used for display or cosplay purposes. Kit is built for the Force awakens look, but comes with extra parts if you would like it to look like Luke’s lightsaber in Empire Strikes back. Don’t miss out on this!!! I accept PayPal Only. Thanks for looking

This is just a project I decided to make from an Ultrasabers blue standard issue saber. I think it looks pretty cool, could also work as a Rey saber! It takes 4 AAA batteries which are included. No sound, its just a nice dueling lightsaber.

The Graflex range is highly sought and collected. Leather Sleeve Finder - Very good. Lens - Very good & clear. Premo Film Back Adapter.

Perfekt um aus entweder einer originalen oder einer Replica Graflex Flashgun ein Lichtschwertumbau in Stile von TESB / TFA durchzuführen. High quality doublesided (2 Variants) TESB Graflex Edge Connector replica.

Crystal Focus v9 soundboard. RB/B/W Tri Cree LED. Micro adapted R.I.C.E port. 18650 Lithium Ion Battery. Custom 3D Printed Chassis. 28mm High Bass Speaker. KR Sabers Graflex Blade Plug. TLJ Glass Eye.

Hole is approx. No doubt any lens of appropriate size mount will also fit. The boards have the correct chamfer for fitting into the slot at the bottom of the focus panel and of course light tight step.

Custom Graflex Lightsaber made using New LEGO parts. The LEGO Group does not sponsor, authorise or endorse the modified/customised product(s) shown nor does it accept responsibility in any way, shape or form for any unforeseen and/pr adverse consequences following from such customisation/modification.”.

Electronic Parts for a lightsaber install. Goth3D Graflex 2.0 Padawan Chassis Painted and weathered by myself using metallic paints. Unused. Plecter Labs Nano Biscotti V3 sound card Unused sound card Blue, Blue, White Rebel LED (from KR sabers) unused LED 7/8” copper heatsink (from KR sabers) Unused. Feel free to ask any questions. Item will be packed well so it arrives safely.

This is a very rare piece! I did not try to clean it up as I will let the new owner do that if they wish to do so.

Very cool. Feels quality.

No haze or fungus, but there is cleaning marks on the front which I do not believe will interfere with anything. The body is well used and shows a moderate amount of wear. Bellows is good and no light leaks.

(Still worthy and capable of a good build, and actually you may be able to free it. I'm not that strong, but hey it could pretty much instantly make a great Maz box TFA version ;).

Real, vintage Graflex glass eye from a 3 cell flashgun. This is from a Graflex Inc with patent number flash. Any questions please feel free to get in touch.

Its 93mm x 94mm.

This item is 3D printed at 20% infill. Printed in color PLA plastic.

Parts for the top mounted rangefinder on a graflex 4x5. All parts in photo included, condition as seen. Thanks for looking.

The hilt is the KR Sabers / 89Sabers manufacture.

Stamped steel Graflex clamp replica with stainless steel long lever as found on the Skywalker / Kenobi stunt lightsaber. - clamp DOES NOT have the word “GRAFLEX” embossed on the body. - clamp fits 1 1/2” body.

With CADDY SHUR GRIP plastic handle. Not tested.

Original and Complete GRAFLEX 3 Cell Flash Gun STAR WARS Red Button Lightsaber. FUNCTIONALITY : Functionality as a flash unit is UNTESTED & thus sold AS-IS. Functionality as a light saber depends on force sensitive of potential user.

TFA Graflex 2.0 Lightsaber For Sale. Great replica Graflex Lightsaber with light and sound that has never been dueled with. 28mm Premium Speaker. Cree Tri XP-E2 L.E.D. (Rb/B/W) White flash on clash.

This is a custom Graflex 2.0 Empire Strikes Back version. Never displayed. Below is a list of every part purchased to create the hilt. I have a Nano Biscotti v4.0, the 2 switches that came with the kit, and a bass speaker on stand by. Electronic components are $60 extra. The 2 switches are included with the hilt because they came with the kit. I will gladly answer any questions! Graflex 2.0 kit = $225 Vintage graflex bunny ears = $100 CSS red button thumbscrew ×2 = $30 KR sabers blk/brass blade plug = $13.73 KR sabers slide tab thumbscrew = $13.46 KR sabers beer tab = $7.49 KR sabers emitter screw = $2.49 KR sabers clamp screw = $2.50 Roman Props graflex clamp = $40 Graflex Shop brass contacts = $6 TOTAL = $440.67

Keep it as it is for exhibit or use it to make your own lightsaber. Sold As Is.

Here is an original Graflex 3 cell flash that was the model used to make Lukes original lightsaber. It is in excellent clean condition showing minor wear. An excellent piece to make into your personal lightsaber.

Graflex 3 Cell. Here we have a genuine Graflex 3 Cell flash unit, the sort used by the original prop makers and enthusiasts subsequently, to make Star Wars Light Sabers.

VINTAGE GRAFLEX 3 CELL flash top handle Send me a decent offer that would be acceptable.

These are untested and being sold as is. All 3 sabers are included. They will come just as shown. No other pieces are included other then what's in the pictures. Chrome/silver surfaces have some scratches and scuffs. Not sure if they function as they were not tested. Unsure of how they work. Please see all pictures for condition. Contact us with any questions or concerns. D87

See Photos. Used and untested. Battery cavity is clean and free of acid. Original red button Graflex bulb flash used to make the Light Saber in Star Wars movies.

Great condition - refer to photos. This item is untested, commonly used as a prop.

Graflex XLRF (rangefinder) with 80mm f2.8 Zeiss Planar lens (Nr 4462639) and cap, Graflock adaptor, RH8 6x9cm back, grip (missing cable release and thumb screw) eye cup, and spare body w/ Graflock adaptor.

This is a replica of the Rey lightsaber from Star Wars Episode VII and VIII The Force Awakens and The Last Jedi. This is the Graflex 2.5 base. The photos show examples of my past work. I do not do the FX electronics, but the lightsaber is hollow and can have electronics installed by you.

Hasbro darth Maul lightsabers one is boxed with coupler both blades are fine no dark spots One issue is one of the battery packs - really easy fix just needs a new speaker. so one battery pack has sound the other does not, also the one battery back is missing a cover which doesn’t effect the saber This is the remove-able blade version , nice for display etc or near offer considered

This is a replica of the Luke Skywalker lightsaber from Star Wars Episode V The Empire Strikes Back. The photos show examples of my past work. I do not do the FX electronics, but the lightsaber is hollow and can have electronics installed by you.

~ Sleek Graflex inspired 5 Axis CNC machined hilt. Hilt Specs ~1.40" General OD x 1.24" ID (OD varies slightly due to tapered hilt design). These are EMPTY hilts and include NO electronics or chassis components.

Genuine Vintage Graflex 2 cell bottom half. Come with the original vintage spring inside. Very good clean condition. I intend to cut the stamped bottom off to insert onto the pommel of a Graflex 2.0 Kit but never found the time and no longer have the 2.0 Kit. Feel free to ask any questions. Item will be packed well so it arrives safely.

This is a replica of the Luke Skywalker lightsaber from Star Wars Episode IV A New Hope. The photos show examples of my past work. I do not do the FX electronics, but the lightsaber is hollow and can have electronics installed by you.