Guitar Pickups

NEW Vanson '57 AlNiCo II Humbucker SET (Zebra). Vanson Guitars. With a delightful honking mid-range and sweet cleans they’re suitable for everything from Classic Rock to Jazz. Utilising an AlNiCo magnet will always produce a more open and dynamic tone, than can be found with typical ceramic magnets.

Wilkinson HOT Single Coil Pickup SET, ( WHITE). Also, the bridge pickup is slightly overwound to increase the output and balance the set, due to the fact that the guitar strings will vibrate less the nearer they get to the bridge.

Brilliant 50s era strat tone with a little more attitude. average dc resistance.neck 6.0k.middle 6.3k.bridge 6.2k.

The middle pickup is reverse wound and reverse polarity, so that it cancels the hum as a 'humbucker' would when playing in position 2 & 4 on a traditional 5 way set-up. Also, the bridge pickup is slightly overwound to increase the output and balance the set, due to the fact that the guitar strings will vibrate less the nearer they get to the bridge.

Neck & Bridge Set (MWCHB). ®, Epiphone. Particularly suitable for upgrading an Epi Les Paul, SG, ES etc or similar mid-priced solid body electric. Mounting rings included do not fit Gibson USA guitars, although the humbuckers themselves are a standard size.

The middle pickup is reverse wound and reverse polarity, so that it cancels the hum as a 'humbucker' would when playing in position 2 & 4 on a traditional 5 way set-up. Also, the bridge pickup is slightly overwound to increase the output and balance the set, due to the fact that the guitar strings will vibrate less the nearer they get to the bridge.

The middle pickup is reverse wound and reverse polarity, so that it cancels the hum as a 'humbucker' would when playing in position 2 & 4 on a traditional 5 way set-up. Also, the bridge pickup is slightly overwound to increase the output and balance the set, due to the fact that the guitar strings will vibrate less the nearer they get to the bridge.

Providing classic 'hum-cancelling' tones, with a warm, round bottom-end, and a thumping mid-range. The Alnico V Polepiece magnets give you a more dynamic response while allowing your guitars natural character to ring through.

Short leg, 4 conducter cable, wide spaced,,, Black Battle Worn covers ,Wide spaced .

Neewer Acoustic 5-Band EQ Equalizer Guitar Preamp Piezo Pickup Tuner with LCD Display Features: Tone and volume control. Accurate built-in tuner 5 bands of equalization: Presence, Bass, Middle1, Middle2 and Treble Control Bright and clear illuminated LCD display, easy to read Powered by 6F22 9V battery(INCLUDED) An effective tool to upgrade your acoustic guitar Description: Neewer Acoustic 5-Band EQ Equalizer Guitar Preamp Piezo Pickup Tuner allows you to adjust the tone easily and provides accurate tuning.

NEW Wilkinson WMHR AlNiCo V Mini-Humbucker. Wilkinsons mini-humbucker has a sound all of it's own. Tonally, it's a cross between a punchy single coil and a warm humbucker, having a tighter and brighter more defined output.

Great sounding and powerful humbucker made by Gibson USA.

Bridge one only and box. long leg. not needed as im having a clearout.

You can feel the difference! Complete Drum Kits. Drum Machines. Kick Drum Pedals. Drum Modules. Drum Sticks. Drum Stools. Digital Drum Monitors.

NEW Wilkinson WMHR AlNiCo V Mini-Humbucker. Wilkinsons mini-humbucker has a sound all of it's own. Tonally, it's a cross between a punchy single coil and a warm humbucker, having a tighter and brighter more defined output.

NEW Vanson '57 AlNiCo II PAF-style Humbucker SET (Colour: Nickel). Vanson Guitars. With a delightful honking mid-range and sweet cleans they’re suitable for everything from Classic Rock to Jazz. Utilising an AlNiCo magnet will always produce a more open and dynamic tone, than can be found with typical ceramic magnets.

The pole pieces were very 'traditional' in that they protruded and were very sharp - the bobbins also didn't quite fit standard size covers. (my fretless is left-handed but I have wired them back to the brass plate for a right-handed bass).

Supplied with screws and springs for fixing. This is unlike the Fender texas specials, where the pole pieces are all over the show, at least on a MIA Standard Strat, resulting in poor sound. To solve this with the modern US standard 2 point bridge is almost impossible.

498T - Gold Screws. Used and works fine.

NEW Wilkinson MWJB Jazz Bass-style Pickup SET. They are very versatile, and produce a deep, rich tone. Neck & Bridge Positions. Approx Resistance:8k (Neck), 9k (Bridge).

I had them in a left-handed bass but have wired them back to the brass plate for a right handed bass. They can also be wired in the 'normal' way if you don't want to use the plate - or it doesn't fit in the cavity of your bass - fairly simple soldering job, although quite delicate so only for the experienced.

Bare knuckle are fantastic.

Bridge pickup only. Billy Gibbons (ZZtop) favourite pickup !

In good condition.

The low end is full and powerful, the highs are crisp and detailed and there’s an upper-midrange bump that adds crunch and chunk to heavy chords but translates to a singing, vocal-like quality when you play single notes or solos.

Seymour Duncan 'Liberator' solderless Strat system on a 11 hole pickguard. In fine physical and functional condition, but has marks and scuffs so better suited to a mildly 'relic / aged' project. Two Tonerider Classic Blues single coils and a 'mystery' humbucker (tapable) which I recall to be Alnico II.

These are good quality original fender parts, all fully wired ready to drop in, an excellent upgrade to a squire or 3rd party strat.

®, Epiphone. Particularly suitable for upgrading an Epi Les Paul, SG, ES etc or similar mid-priced solid body electric. Wi lkinson 'HOT' ZEBRA Humbuckers. Mounting rings included do not fit Gibson USA guitars, although the humbuckers themselves are a standard size.

Noiseless Soundhole Pickup For Acoustic Guitars. Adjustable to fit the majority of soundhole sizes (min 95mm to max 101mm). Fully ShieldedNoiseless Magnetic Humbucker. "Dear Sir or Madam, I have to say that after buying a set of Adagio acoustic strings that I am a fan for these strings and will use them again.

CTS Blender. (Blenders allow you to blend in Neck and Bridge p/up together, on positions 1,2, 4 and 5. Clean, glassy, bell like tones. Resistance: 4.6k, Henries: 3.0. ).

Seymour Duncan Seth Lover Nickel Neck pickup in excellent condition. Plenty of lead left as I removed only the minimum when installing the pickup.

Nothing much to say really, this is Seymour Duncan's most popular bridge pickup, in perfect working order.

Used bare knuckle pickup, neck position Nailbomb. This was removed from custom siggi braun guitar to replace with a Cold Sweat neck pickup for a minor tonal change. It has had its screw holes widened to 3mm and screw plates rounded, but neither will cause mounting issues. Spec: Alnico V magnet, 6 string, standard spacing, 4 conductor, short leg, black open coil.

The alnico 4 rods seem to perform well in this respect, even with my [very] old flat wound strings. Alnico 4 rods. 4 Conductor hookup. Includes mounting screws, covers (black), and info booklet. I'm not yet including any mounting springs, or foam.

Signal wiring is PTF coated wire which gives more shielding against hum interference. RED/BLUE: 27.2k 10.6 Henries. The plate is 3 ply tortoiseshell, shielded. 5-way switch: CRL, made in the U.S.A.

DiMarzio Chopper White, bridge, lots of cable length.

See pics for info.

AP10 acoustic preamp, nearly mint.

New Old Stock from 1996 Schaller 2 in 1 bridge Humbuckers with original creme pickup surround. 4 core conductor and 13k output and DPDT switch Typical on Kramer guitars from this time period. Brand new just removed from sealed package to assemble in surround. Superb made pickups from Schaller and made in Germany.

Unobtrusive format. With three models, the Presys, Presys and Presys Blend models, the compact sophisticated Presys. Classic Fishman Presys Blender. also include a pre-wired Fishman Sonicore pickup for solder-free, plug and play installation, a low battery indicator, low profile.