• Lie Nielsen L-N 100 Squirrel Tail Model Makers Block Plane.Usa.

    £48.50
    20 bids
    £2.99 postage
    Ending 28 Aug at 8:52PM BST7d 21hType: Carpentry/ WoodworkingManufacturer: Lie-Nielsen
  • Lie Nielsen No. 7 Jointer Plane

    Condition is Used. Collection in person only.
    £299.00
    Collection in person
    or Best Offer
    Type: Carpentry/ Woodworking
    20 watching
    Manufacturer: Lie-Nielsen
  • Lie Nielsen No. 97 1/2 Small Chisel Plane

    <p>After making some prototypes of this interesting and unusual plane, discontinued by Stanley in 1944, it became apparent that a smaller version would be handy. So Lie Nielsen offer the Chisel Plane in the original size, 10" (25.40cm) x 2¼" (5.71cm), and this plane at half the size, 6½" (16.51cm) x 1¾" (4.44cm).</p> <p>A Chisel Plane is not meant to function as an ordinary plane because it has no support ahead of the blade. However, as a clean-up tool, with the blade set flush with the sole, this plane excels at removing glue, trimming plugs and dovetails flush or cleaning the very corners of rabbets.</p>
    £139.00
    Type: Chisels
    £5.95 postage
    Manufacturer: Lie-Nielsen
    7 watching
  • Lie-Nielsen No. 610 Low Angle Jack Rebate Plane

    <p>A Lie-Nielsen original, the Low Angle Jack (I say Rebate, you say Rabbet) plane is a cross between the Bench Rebate plane (but without the tilting knob and handle) and the Low Angle Jack Plane, giving you a full width cutting blade in a convenient, low angle format.</p> <p>This is a great plane for raising panels, making long rebates, working into corners and large-scale joinery.</p> <p>A 12° blade bed angle and nickers for cross grain work complete the tool.</p> <p>Length 323mm (12.3/4"), width 54mm (2.1/8") with a full width 4.8mm (3/16") thick A2 blade.</p>.
    £243.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen Boggs Spokeshaves

    £39.76 to £134.00
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen Tool Specific Screwdrivers

    £24.85 to £29.80
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    2 watching
  • Lie Nielsen No. 1 Bench Plane

    <p>Based on the famous Stanly No. 1 a miniature Bench Plane 5½" 114 cm) long with a 1-3/16" (3 cm) x .110" (2.79 mm) thick blade. Bronze body only. Now with the New Improved Chipbreaker.</p>.
    £223.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    2 watching
  • Lie Nielsen No. 40 1/2 Scrub Plane

    <p>A Scrub Plane removes large quantities of wood in a hurry. In the past, Scrub Planes were used like a Thickness Planer to take rough-sawn boards down to size, before finishing with a Jack Plane and a Smooth Plane.</p> <p>Today’s woodworker will still find pleasure in using a Scrub Plane for this purpose, and will also find it practical for shaping irregular objects, producing an interesting finished surface or for jobs like backing out a length of molding to fit an irregular wall.</p> <p>This Scrub Plane has a cast Iron body, 10¼" (26.03cm) long. The blade is massive to eliminate chatter — 1½" (3.81cm) x 3/16" (4.76mm) thick. A 3" (7.</p>
    £163.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    5 watching
  • Lie Nielsen No. 60 1/2R Rebating Block Plane

    <p>Years ago, Sargent made a small rebating block plane, No. 507. It’s a great design, handy as a block plane and wider than most rebate planes, making it easy to trim tenons to fit. Blade bedded at 12°. Non-adjustable mouth, 1¾" (4.44cm) overall width, 6¼" (15.87cm) long, unbreakable Ductile Iron body. Bronze cap, 1/8" (3.17mm)thick blade, body ground flat and square to .001" (.0254mm).</p> <p>Lie Nielsen's Rebate Block Plane is 1¾" wide overall, with a full width blade pitched at 12°. The sole is ground flat to .0015", and the sides are ground square to the sole. The mouth is fixed, and set to take a maximum .005"-.008" shaving.</p>
    £173.95
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    15 watching
  • Lie Nielsen No. 4 1/2 Smoothing Plane

    <p>For some, this is the ultimate smoothing plane. It is a bit longer and wider than the No. 4. The blade width is 2 3/8" (6cm), and 10 3/8" (26.4cm) long. Weight is 5½ lbs (2.49kg)<br /> <br /> Ductile Iron body only, Bronze frog and cap, Cherry handle and knob. Massive .140" (3.55 mm) thick blade.</p>.
    £322.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    Only 1 left.
  • Lie Nielsen No. 40B Butt Mortise Plane

    This tool is easy to use and will make precise mortises with sharply square corners to an accurate, uniform depth. The elongated slot in front of the blade provides a clear view of the work. This tool does a job no other plane can do.
    £109.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen No. 51 Shooting Board Plane

    <p>Tool collectors and users have been requesting this rare tool for many years, after years of development, Lie Nielsen Toolworks has found a way to produce it.</p> <ul> <li>Designed to trim mitres and end grain on a shooting board</li> <li>Standard 60mm bench plane blade and frog</li> <li>380mm long and just over 4kgs</li> </ul> <p>The No. 51 is an unusual skew-blade plane that is designed to be used on a shooting board to trim miters or the ends of boards. The L-shaped base casting allows the tool to be used easily and accurately on its side and to be captured effectively in a track on a shooting board.</p> <p>Stanley first made its version in 1909 along with a metal shooting board.</p>
    £496.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    3 watching
  • Lie Nielsen No. 2 Bench Plane Bronze

    <p>7½" (19.1cm) long with a 1-5/8" (4.13cm) x .125" (3.17 mm) thick blade. Although a small bench plane, the No. 2 is considerably larger than the No. 1 and has good heft in the hand. Body is available in Bronze, weight 3¾ lbs (1.496 kg) Now with the new improved chip-breaker.</p>.
    £273.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    4 watching
  • Lie Nielsen No. 7 1/2 Low Angle Jointer Plane

    At 558mm (22”) long with a 60mm(2.3/8”) wide A2 cryogenically treated blade its dimensions are the same as a standard No. 7 plane. The blade is mounted at an angle of 12°) long with a wide A2 cryogenically treated blade its dimensions are the same as a standard No. 7 plane. The blade is mounted at an angle of 12° with the bevel up; this design gives as much support as possible to the cutting edge. It has a cast ductile iron body with bronze lever cap, smooth depth adjustment and cherry wood handles. This is an uncomplicated tool that will give great results on end grain and long grain in most situations. Weight 3.34kg (7 35lbs).
    £347.95
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen Shoulder Plane No. 41 DT703003

    When they were first introduced by Preston in the late 19th century, these rabbet planes represented a major breakthrough in plane design. Record continued making these planes until a few years ago.
    £169.90
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Aug 22Type: Carpentry/ WoodworkingManufacturer: Lie-Nielsen
  • Lie Nielsen Small Bronze Spokeshaves

    £94.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie-Nielsen No. 4 Bench Plane Bronze Body

    <p>A full size Smoothing Plane, 9½" (24.1cm) long, 2" (5.08cm) x .125" (3.17mm) thick blade, 4lbs (1.81kg) in Iron, 4½lbs (2.04kg) in bronze. Capable of taking the finest shavings from the most difficult woods. Now with improved chipbreaker.</p> <p>Featuring the famous Bedrock frog, giving the ability to open or close the mouth without the need to dismantle the plane. The fully machined mating fit between the frog and body along with a 3mm thick blade virtually eliminates the possibility of chatter. The soles are hand flattened, the cherry wood knob and handle are polished with a wiping varnish. The A2 cryogenically treated blade only requires a light honing before the plane is ready to use.</p>.
    £346.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    Only 1 left.
  • Lie Nielsen No. 10 1/4 Bench Rebate Plane

    Also referred to as a Carriage Maker’s Rebate or Jack Rebate Plane, this plane is the largest rebate plane made. There have been several versions of this tool. Lie Nielsen's is based on the Stanley 10¼, which had not been made since the Second World War, and had never before been made in the Bedrock format. It features cross-grain nickers and tilting knobs and handles. <br /> <br /> This tool is stout and has excellent balance. The cross-grain nickers cut grain fibers ahead of the blade to produce a clean, square, vertical cut. The nickers are small blades, ground dead flush with the sides of the tool. Easy to sharpen and easy to set to depth or retract.
    £372.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    3 watching
  • Lie Nielsen Wallet for Low Angle Block Planes

    £40.60 to £46.40
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    1 watching
  • Lie Nielsen No. 041 Small Shoulder Plane

    <p>Small Shoulder Plane<br /> This is the smallest of the Preston style shoulder planes, 5/8" (1.58cm) wide, 5 3/4" (14.60cm) long. The blade is .125" (3.55mm) thick, and the tool weighs 1.35 lbs. With an adjustable mouth like its larger siblings, this tool is just right for trimming and fitting small tenons, dadoes and rebates. <br /> <br /> </p>.
    £163.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    3 watching
  • Lie Nielsen No. 271 Small Router Plane

    Loosely based on the Stanley 271, this small router plane features a stout 1/4" (6.35mm) square blade and is perfect for small relief and shallow mortise work. Approximately 4" (10.16cm) x 2" (5.08cm), weight .55 lbs. Optional 3/32" (2.38mm) square tipped and pointed blades for inlay work available. <br /> The open throat design makes it easy to see what you are doing. Sometimes, as when working a narrow edge, this can be a drawback. A piece of wood or MDF, taped or screwed to the base solves this problem. <br />.
    £79.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    Only 1 left.
  • Lie Nielsen No. 95 Bronze Edge Plane

    <p>This plane, our first tool, is an adaptation of the Stanley No. 95. It has an integral 90° fence, making its primary use squaring the edges of stock. With appropriate angle blocks, it can produce various angles or widen dadoes and rabbets to depth. The fence, coupled with a low-angle skewed blade, makes these jobs simple and precise, working either with or across the grain or on plywoods. This plane also makes an effective small jointer when used with a straight edge clamped to the work.<br /> <br /> The body is cast Manganese Bronze, a hard and durable alloy, that gives welcome heft to this small plane. Each tool is polished to a mirror finish. Blades are 1/8" (3.17mm) thick.</p>
    £148.99
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    Only 1 left.
  • Lie Nielsen No. 48 Tongue and Groove Plane

    <p>This tool cuts a groove with one side of the cutter exposed. Swing the fence to expose both sides to cut the tongue. The slot in the one-piece blade registers on the milled body casting, to ensure squareness and equal depth of cut on both sides. Since this is a heavy stock removal tool no depth adjuster is needed. Made to center on 3/4" stock, tongue and groove will be offset on thinner or thicker stock. A companion tool made to center on 1/2"stock will be available shortly. </p>.
    £193.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen Plane Blades

    £34.80 to £39.76
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen No. 5 1/2 Jack Plane

    <p>Equipped with the same A2 cryogenically treated 60mm(2.3/8”) blade width as a No. 7 jointer yet only 375mm(14.3/4”) long, it is more suitable for planing the surfaces of wide boards. Crafted by machine and finished individually by hand this is the true hallmark of Lie Nielsen. Weighs 3.2kg. Now with the improved chipbreaker.<br /> </p>.
    £372.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen No. 66 Bronze Beading Plane

    £173.95
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen No. 212 Scraper Plane

    <p>A quite unusual plane with its almost perpendicular blade.</p> <p>Tom Lie Nielsen has produced the perfect tool for a myriad of fine finishing jobs (there was no better tool than the Stanley No.212 when it came to thicknessing bamboo fly rod sections). This is a plane that will produce shavings like the finest lace and leave a smooth surface and crisp edges. The blade angle is adjustable to enable the plane to be set up just right for the particular timber being worked.</p> <p>Also available are toothing blades for preparing a ground prior to veneering without compromising its flatness. Body 140mm(5.1/2") by 44mm(1.3/4") by 44mm(1.3/4"). A2 cryogenically treated blade width 34mm(1.3/8").</p>
    £173.95
    Type: Scrapers
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie-Nielsen Carcass Saws DT712027 Tenon Shoulders Medium Fine Crosscut Teeth

    Ideal saw for cutting tenon shoulders. The Carcass Saw is used for precise cuts across the grain, cutting tenon shoulders, and defining the edges of a dado. The blade is 0.5mm(.020") thick, with a 0.07mm(.003") set.
    £161.16
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Aug 22Type: Carpentry/ WoodworkingManufacturer: Lie-Nielsen
  • Lie Nielsen No. 5 Jack Plane

    <p>Body cast from fine ductile iron, manganese bronze frog mounted in the famous Bedrock style, and polished cherry wood handles. Fitted with an A2 cryogenically treated 3mm (1/8”) thick 50mm (2”) wide blade, 355mm(14”) long, weighing in at 2.5kg(5 1/2lbs). </p>.
    £322.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie-Nielsen Bed Floats DT715160 Finishing Mortises

    For finishing mortises. Lie-Nielsen® Bed Floats. Lie-Nielsen® Floats. Special float for finishing wooden plane bodies. Rectangular maple handle. A hardness of 52 HRC allows resharpening by hand with a triangular file.
    £63.16
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Aug 22Type: Carpentry/ WoodworkingManufacturer: Lie-Nielsen
  • Lie Nielsen No. 85 Cabinet Makers Scraper Plane

    We have found that, with a 45° bevel on the blade, our thick scraper blades sharpen more easily and produce a better surface "Lie Nielsen". Slightly round the corners of the blade with a stone to prevent them from marking the work.
    £213.50
    Type: Scrapers
    £5.95 postage
    Manufacturer: Lie-Nielsen
    Only 1 left.
  • Lie Nielsen No. 8 Jointer Plane

    <p>This is the largest of Lie Nielsen's production bench planes, a massive 610mm(24”) long with an A2 cryogenically treated 66mm(2.5/8") wide blade and weighing 4.54kg(10lbs). An awesome tool, highly effective in the right hands.</p>.
    £472.00
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie-Nielsen No. 101 Violin Maker's Plane

    The blade is made from 1/8" thick cryogenically treated A-2 steel for chatter-free cuts and prolonged edge life. It is bedded in the plane at 18°, giving you a cutting angle of 43°. The mouth of the plane is made to take a maximum. 008-.010" cut, which is suitable for most woodworking.
    £94.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    Only 1 left.
  • Lie Nielsen No. 164 Low Angle Smoothing Plane

    <p>The Low Angle Smoothing Plane is based on the rare Stanley 164, and is essentially a shorter version of the Low Angle Jack Plane — with an adjustable mouth, and a massive 2" (5.08cm) wide, 3/16" (4.7mm) thick blade, set at 12°. However, this tool is only 9½" (24.1cm) long and weighs 3¾ lbs.</p> <p>Called a Smoothing Plane because of its size (the same as the No. 4 Smoother). But like the Jack, it excels at both rough and finish work, and can be converted from one mode to another very quickly. The unique overhead Bailey-type blade adjuster provides smooth depth adjustment at your fingertips.</p>.
    £263.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
    3 watching
  • Lie Nielsen No. 6 Fore Plane

    The A2 cryogenically treated blade has a width of 60mm(2.3/8”) and with an overall length of 455mm(18”) it weighs in at 3.4kg(7.1/2lbs). Blade Sharpening: Your Lie Nielsen is ready to cut wood out of the box.
    £372.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen No. 042 Medium Shoulder Plane

    <p>Similar to the Large Shoulder Plane, but only 3/4" (1.90cm) wide, weight 2.35 lbs. Body is 7-3/4" (19.68cm) long, with a 3/4" (1.90cm) x .140" (3.55mm) thick blade. This is an elegant tool for trimming and fitting tenons, dadoes and rebates.</p>.
    £193.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen Plane Socks

    £9.85 to £11.32
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie-Nielsen Smoothing Plane No. 4, Spheroidal Bronze DT703736 tyzacktools

    Featuring the famous bedrock frog, giving the ability to open or close the mouth without the need to dismantle the plane. The fully machined mating fit between the frog and body along with a 3mm thick blade virtually eliminates the possibility of chatter.
    £344.99
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Aug 22
    5 watching
    Type: Carpentry/ WoodworkingManufacturer: Lie-Nielsen
  • Lie Nielsen No. 3 Bench Plane Bronze

    Cast in manganese bronze, have the unique Stanley Bedrock frog design. A fully machined mating fit between the frog and body, with the maximum possible area of contact and with the added benefit of being able to move the frog backwards or forwards, allowing the opening or closing of the plane's mouth without having to remove the lever cap or blade. The soles are hand flattened. Knobs and handles are polished cherry wood. The A2 cryogenically treated blades are a full 3.2mm(1/8”) thick and all that is required is a light honing of the blade before the plane is ready to use. <br /> The No. 2 is 190mm(7.1/2”) long with a 41mm(1. 5/8”) wide blade and weighs 1.48kg(3.1/4lb). <br /> The No. 3 is 200mm(8”) long with a 44mm(1.3/4”) wide blade and weighs 1.
    £322.96
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Replacement Blade - Lie-Nielsen Boggs Spokeshave

    <p>The Boggs Spokeshave is a collaboration between Kentucky Master Chair Maker Brian Boggs and Lie Nielsen Toolworks. It is hefty and solid, weighing 12 oz. Body is 10" long, with a 1" (2.54cm) wide flat sole. 2" (5.08cm) x 1/8" (3.17mm) thick A-2 blade, Bronze body and cap. Hickory handles. Designed for fine, precise shaping in all woods. Also available with a curved sole (5" (12.70cm) radius).</p>.
    £39.76
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie-Nielsen Smoothing Plane No. 4, Spheroidal Cast Iron DT703712 tyzacktools

    Featuring the famous bedrock frog, giving the ability to open or close the mouth without the need to dismantle the plane. The fully machined mating fit between the frog and body along with a 3mm thick blade virtually eliminates the possibility of chatter.
    £295.99
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Aug 22
    7 watching
    Type: Carpentry/ WoodworkingManufacturer: Lie-Nielsen
  • Lie Nielsen No. 073 Large Shoulder Plane

    <p>This all-metal Shoulder Plane is based on the Record 073, which in turn was based on a Preston model. The tool is 8¼" (20.95cm) long, with a 1¼" (3.17cm) x .140" (3.55mm) thick blade. The body is cast from Ductile Iron, the lever cap is Bronze. Weight 4 lbs.</p> <p>The captive-nut blade adjustment is very positive. Adjustable mouth and locking screws are large and convenient. The mouth adjustment screw is captured in the toe piece and threaded into the body. Therefore, it adjusts the mouth both when turned in and when turned out, unlike the original.</p> <p>The body is precisely ground flat and square — an essential feature for a shoulder plane. The blade is .005" (.</p>
    £248.50
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Concave Boggs Spokeshave

    <p>The Boggs Concave Spokeshave is a collaboration between Kentucky Master Chair Maker Brian Boggs and Lie Nielsen Toolworks. A 2 5/8" (6.66cm) diameter sole makes this tool the right choice for working chair spindles and other round parts. Weight 8 oz. Body is 9 5/8" (24.44cm) long, A-2 blade 1 1/8" (2.85cm) x 1/8" (3.17mm) thick, Bronze body and cap. Hickory handles.</p>.
    £134.00
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie-Nielsen Straight Drawknife

    <p>Used for rough shaping of wood prior to the use of finer tools.</p> <ul> <li>175mm x 32mm blade, hardened to HRC 60-62</li> <li>Relief-milled back for ease of sharpening</li> <li>Stainless steel nuts and ferrules secure polished maple handles</li> <li>Supplied with a thick leather sheath for protection</li> </ul>.
    £168.95
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie-Nielsen Dovetail Saw Blade Thickness 0.5 mm DT712025 Triangular Ripsaw 1.8mm

    Precise, efficient back saws that produce clean cuts. Triangular teeth that cut on the push stroke, especially for dovetail joints. The minimum set makes it easier to saw a straight line. Lie-Nielsen Dovetail Saw, Blade Thickness 0.5 mm.
    £148.16
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Aug 22Type: Saws & Saw BladesManufacturer: Lie-Nielsen
  • Lie-Nielsen Drawbore Pin Pair For Medieval Wood Nail Joints DT701202

    The conical drawbore pins are used to pull the joint together. Made of O1 tool steel, 60-62 Rockwell, pin Ø at the base 11 mm, at the tip 2.8 mm. Overall length 305 mm. Maple handles. Sold in pairs.
    £101.16
    Top Rated Plus
    FAST & FREE
    Est. delivery dateEst. delivery Thu, Aug 22
    22 watching
    Type: Carpentry/ WoodworkingManufacturer: Lie-Nielsen
  • Lie-Nielsen Leather Wallet for Bronze Spokeshaves

    Soft leather Leather case protects your Boggs Spokeshave for storage and transportation. Beautifully made in USA. Fits both curved and flat soled spokeshaves.
    £23.20
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen
  • Lie Nielsen Spokeshave Wallets

    £23.20 to £29.00
    Type: Carpentry/ Woodworking
    £5.95 postage
    Manufacturer: Lie-Nielsen

Got one to sell?

Get it in front of 17+ million UK buyers.

Tell us what you think - opens in new window or tab