Nissan Terrano Performance Chips

This very effective non-adjustable modification will allow you to safely and reliably boost the power output of your vehicles engine, without the need for an expensive and irreversible remap. It consists of a small electronic chip that will give up to 40 BHP and 50 nm of torque when connected to just two of your vehicles MAF/MAP sensor wires.

CAR:NISSAN TERRANO 2.7TDI (1996-2000) 92kW. The power gains are very appreciable, no any other modifications are required with this chip.

CR2 Ecobox Powerbox. Common Rail Diesel Tuning Chip. Will fit the vehicles listed below that have the Common Rail (CR) fuel injection system. Noticeable power increase with improved crisp response, smoother acceleration and better low end torque.

This very effective fully adjustable modification will allow you to safely and reliably boost the power output of your vehicles engine or reduce it and save mpg, without the need for an expensive and irreversible remap.

The VPM20 Performance Chip Tuning Box unique system with original Plug&Play connectors on the web, works by modifying the electronic signals from electronic Zexel diesel pump by Nissan Terrano II 2.7 92 KW or 125 bhp (no Bosch round connector available) and Nissan Patrol 2.8 110 bhp and 95KW or 129 BHP or Mitsubishi Pajero with the Nissan 2.8 engine.

The VPM20 Performance Chip Tuning Box works by modifying the electronic signals from eletronic Zexel and Bosch diesel pump by Nissan Terrano 2.7 125 bhp. The main problem with a diesel engine is - getting it to start.

Nitro OBD2 Powerbox. OBD2 Performance Tuning Chip - for Diesel Vehicles. Will fit all diesel vehicles that have a OBD2 diagnostic connector fromyear 2003 onwards. Noticeable power increase with improved crisp response, smoother acceleration and better low end torque.

OBD2 Ecobox. Will fit all diesel vehicles that have a OBD2 diagnostic connector fromyear 2003 onwards. Also see the:Nitro Powerbox - OBD2 Performance Tuning Chip - for Diesel Vehicles. Only for diesel vehicles from year 2003 onwards.

The VPM20 Performance Chip Tuning Box works by modifying the electronic signals from eletronic Zexel and Bosch diesel pump by Nissan Terrano 2.7 125 bhp and Nissan Patrol 2.8 110 bhp and 128 BHP or Mitsubishi Pajero with the Nissan 2.8 engine.

Centralina Aggiuntiva.

NitroOBD2 is a Chip Tuning Box which plugs into the OBD2 connector of your car to increase the performance of your car. When plugged in to the OBD2 connector, NitroOBD2 receives the information from the car ECU.

Nitro OBD2 Can be swapped from car to easily, unlike a remap which is fixed. NitroOBD2 is a Chip Tuning Box which plugs into the OBD2 connector of your car to increase the performance of your car. When plugged in to the OBD2 connector, NitroOBD2 receives the information from the car ECU.

This increases the power and torque of about 15-35% (depending on the condition of the car and its components). The device can also be used with other tuning boxes (eg. ProRacingX Chip OBD2 is fully secure, will not overload the engine, because the power is gained in the limit on what the car will permit. ).

This increases the power and torque of about 15-35% (depending on the condition of the car and its components). The device can also be used with other tuning boxes (eg. ProRacingX Chip OBD2 is fully secure, will not overload the engine, because the power is gained in the limit on what the car will permit. ).

DTE system PedalBox 3s for Honda CR-5 RE 2006-2009 2.2 L i-CDTI R4 103KW accelerator chip tuning pedal tuning. DTE-systems PedalBox 3S Honda CR-V (RD). A second DTE product line is the PedalBox: the gas pedal tuning for all passenger vehicles with electronic accelerator pedal.

NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. It works based OBD2 protocols as remaping the Car's computer ECU. NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

EcoOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. EcoOBD2 Chip Tuning Boxes are high quality. Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it.

Other Part Number: remote key CHIP. Surface Finish: good. Manufacturer Part Number: BC01003 10. Interchange Part Number: Chip. We will reply you within 24- 48 hours. Suit for. Country/Region of Manufacture: China.

Installed in 10 minutes or less. It is a complete plug-&-play system that connects above your gas pedal and stays inside your car, you don’t even need to pop your hood. This is achieved by amplifying the signal being sent from the sensor on your gas pedal to the vehicle's ECU (computer).

NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. It works based OBD2 protocols as remaping the Car's computer ECU. NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. It works based OBD2 protocols as remaping the Car's computer ECU. NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. It works based OBD2 protocols as remaping the Car's computer ECU. NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

EcoOBD2 Saves 15% fuel for Benzine cars. Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars.

Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.

Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. EcoOBD2 is easy to install. Just plug it into the OBD2 connector of cars. EcoOBD2 fits all car from the year of 1996.

NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. It works based OBD2 protocols as remaping the Car's computer ECU. NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. It works based OBD2 protocols as remaping the Car's computer ECU. NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car.

Centralina Aggiuntiva.

Centralina Aggiuntiva.

DTE system PedalBox 3s for Honda CR-5 RE 2010 2.2 L i-DTEC R4 110KW accelerator chip tuning pedal tuning. DTE-systems PedalBox 3S Honda CR-V (RE). A second DTE product line is the PedalBox: the gas pedal tuning for all passenger vehicles with electronic accelerator pedal.

DTE system PedalBox 3s for Honda CR-5 RE from 2006 2.0 L i-VTEC R4 110KW accelerator chip tuning pedal tuning. DTE-systems PedalBox 3S Honda CR-V (RE). A second DTE product line is the PedalBox: the gas pedal tuning for all passenger vehicles with electronic accelerator pedal.