Porsche 911 Car Suspension & Steering Bearings, Bushings & Bush Kits

Porsche 911 '69-'89 front A-arm suspension SuperPro bushes & refurbished mountings. New SuperPro Polyurethane bushes 0236A (these are the latest type with the fine microribs on the inside surface to hold the special grease and reduce friction).

This is the washer that fits on the strut top on the damper rod so you can grip it.

This is the washer that fits on the strut top on the damper rod so you can grip it.

New number is 9P1407621. It's made by FAG which is OEM I've been told.

SuperPro is an advanced Australian manufacturer of automotive polyurethane suspension bushings and parts based in Brisbane, Queensland. Suspension Bushings (SuperPro). SPF0893K 1 Gear Linkage Bush Kit 2 Bushes, SuperPro Grease.

Why fit PowerFlex?. Front Wishbone Inner Bush. Quantity 4 Bush(es). PORSCHE 911 CLASSIC (1969 - 1973). If you wish to pursue a warranty claim we shall act on your behalf and shall treat all claims as a matter of urgency.

It is an original Porsche mounting that have been professionally blasted and powder coated. Ready to fit. See my other 911/912 and 914 parts listed.

Washer from top strut mount. I believe this is off earlier cars but can be used on later ones.

Bushes are designed and engineered to exact specifications. Keeping the suspension working as the manufacturer intended. Polybush Vehicle Bush Set. Polybush are the world leader in Polyurethane Suspension Bushes and Components.

Unlike old technology Poly bushes any increase in vibration / harshness felt through the vehicle is normally undetectable. Powerflex Front Anti Roll Bar Bushes 21.5mm for: Porsche 996 (1997-2005). Bushes are one of the most highly stressed components fitted to a car.

SuperPro Polyurethane Front Anti Roll Bar Bush Kit. SuperPro Part No. SPF1450-28K (to Suit 28mm Anti Roll Bar). SPF1450-28K 1 F Anti Roll Bar Bush Kit 2 Bushes, SuperPro Grease. Why Choose SuperPro Polyurethane?.

328951#713612280. Vehicle compatibility information is provided as a guide only and is only shown when viewing this page on a desktop computer. Porsche OEM References Huge Range. The manufacturer's opinion shall be final and binding and we shall have no further liability to you.

PFR57-410BLK Powerflex Black Rear Trailing Arm Inner Bushes Porsche 911. Powerflex Black Rear Trailing Arm Inner Bushes. Powerflex Black Part Code: PFR57-410BLK. Bushes on Vehicle: 2. This in turn can cause accelerated tyre wear, braking instability and poor handling.

SuperPro is an advanced Australian manufacturer of automotive polyurethane suspension bushings and parts based in Brisbane, Queensland. Suspension Bushings (SuperPro). Why Choose SuperPro Polyurethane?.

SuperPro is an advanced Australian manufacturer of automotive polyurethane suspension bushings and parts based in Brisbane, Queensland. Suspension Bushings (SuperPro). SuperPro polyurethane suspension bushes are engineered like no other.

SuperPro is an advanced Australian manufacturer of automotive polyurethane suspension bushings and parts based in Brisbane, Queensland. Suspension Bushings (SuperPro). Why Choose SuperPro Polyurethane?.

Powerflex Front Suspension Bush Kit. Why choose Powerflex Polyurethane Suspension Bushes?. POWERFLEX bushes make sense. POWERFLEX for improved performance. Leading suppliers of Powerflex Bushes. Kit Contains Following Parts:Diagram Position 1: Front Anti Roll Bar Bushes PFF57-501-21.5 [21.5mm]or PFF57-501-22.5 [22.5mm]or PFF57-501-23 [23mm]or PFF57-501-23.5 [23.5mm] (Quantity 2).

PFF57-402 Powerflex Front Stabilizer Link Rod Bushes Porsche 911. Powerflex Front Stabilizer Link Rod Bushes. Powerflex Part Code: PFF57-402. Bushes on Vehicle: 4. This in turn can cause accelerated tyre wear, braking instability and poor handling.

Genuine Powerflex Approved Distributor. Product Specific Notes: For 911 Classic models 1977 onwards only. For 911 Classic models 1974 to 1977 use 4 x PFR57-412-18. Bush Number on Diagram: 12. We will always try to find your sale but if we have no information it's like finding a needle in a haystack!

POWERFLEX FRONT Anti-roll-bar to Chassis Bushes (QTY PER CAR 2) TO FIT Porsche 911 Turbo Carrera 2/4 & RS 964 89-93. However that is not the whole story. When you consider the cost of fitting new bushes and the fact that POWERFLEX will be the last bushes you every fit to your car things start to look a bit better.

SPRING PLATE BUSHING POLY.

Part Number:802 553. chassis number (VIN) and we will confirm the correct part required. Be aware that each model of vehicle may have a choice of few different part options. Such variations can apply due to upgrade designs on later chassis numbers, or the manufacturers using different OEM suppliers during production process.

POWERFLEX BUSHES & MOUNTS > BUSHES & INSERTS. POWERFLEX REAR Anti-roll-bar to Chassis Bushes (QTY PER CAR 2) TO FIT Porsche 911 excl GT3 996 97-04. However that is not the whole story. When you consider the cost of fitting new bushes and the fact that POWERFLEX will be the last bushes you every fit to your car things start to look a bit better.

Porsche 911/912/914 front top mount mounting washers. Part No. 90150193321. The larger rear washer is the earlier type used 1965 to 1969 but can equally well be used on later 911 up to 1989. These are original washers that have been stripped and replated.

POWERFLEX BUSHES & MOUNTS > BUSHES & INSERTS. POWERFLEX FRONT Anti-roll-bar to Chassis Bushes (QTY PER CAR 2) TO FIT Porsche 911 excl GT3 996 97-04. However that is not the whole story. When you consider the cost of fitting new bushes and the fact that POWERFLEX will be the last bushes you every fit to your car things start to look a bit better.

POWERFLEX BUSHES & MOUNTS > BUSHES & INSERTS. POWERFLEX FRONT Stabilizer link rod bush (QTY PER CAR 4) TO FIT Porsche 911 Classic 65-73. However that is not the whole story. When you consider the cost of fitting new bushes and the fact that POWERFLEX will be the last bushes you every fit to your car things start to look a bit better.

The four manufactured formulations of firmness (70, 80, 90, & 95 Shore-A) enable us to match the needs of each individual application. It ensures a precise fit - an important part of the optimum crush, pre-load, and location equation.

POWERFLEX BUSHES & MOUNTS > BUSHES & INSERTS. POWERFLEX REAR Trailing arm support plate bush (QTY PER CAR 2) TO FIT Porsche 911 Classic 65-73. However that is not the whole story. When you consider the cost of fitting new bushes and the fact that POWERFLEX will be the last bushes you every fit to your car things start to look a bit better.

SuperPro is an advanced Australian manufacturer of automotive polyurethane suspension bushings and parts based in Brisbane, Queensland. Suspension Bushings (SuperPro). SPF0142-21K 1 Front Anti Roll Bar to Body Bush Kit 2 Bushes, SuperPro Grease.

Unlike old technology Poly bushes any increase in vibration / harshness felt through the vehicle is normally undetectable. Porsche 911 Classic (1965-1967) Powerflex Black Rear Trailing Arm Support Plate Bushes PFR57-411BLK.

Genuine Powerflex Approved Distributor. Product Specific Notes: This part includes an optional support washer with a built in insert to fit into the voided bush for quick and easy tuning of stiffness levels.

Genuine Powerflex Approved Distributor. Bush Number on Diagram: 15. Set Content 1 Set Content 2 Set Content 3 Add to Favourites. Replaces O.E Part Number (if applicable) Need your item within 24 hours?.

POWERFLEX BUSHES & MOUNTS > BLACK SERIES for RACE & RALLY. However that is not the whole story. When you consider the cost of fitting new bushes and the fact that POWERFLEX will be the last bushes you every fit to your car things start to look a bit better.

SuperPro is an advanced Australian manufacturer of automotive polyurethane suspension bushings and parts based in Brisbane, Queensland. Suspension Bushings (SuperPro). Why Choose SuperPro Polyurethane?.

Porsche 944 968 911 964 (1988-1995). Porsche part no.: 951.331.067.01. Rear Wheel Hub. Changed your mind?. When buying used parts. Casting no.: 951.331.607.01.

POWERFLEX BUSHES & MOUNTS > BUSHES & INSERTS. POWERFLEX FRONT Wishbone Inner Bush (QTY PER CAR 4) TO FIT Porsche 911 Classic 65-73. However that is not the whole story. When you consider the cost of fitting new bushes and the fact that POWERFLEX will be the last bushes you every fit to your car things start to look a bit better.

2 required. Fits all 911 models from 1965 through 1967 (up to chassis number 307325).

PFF57-402BLK Powerflex Black Front Stabilizer Link Rod Bushes Porsche 911. Powerflex Black Front Stabilizer Link Rod Bushes. Powerflex Black Part Code: PFF57-402BLK. Bushes on Vehicle: 4. This in turn can cause accelerated tyre wear, braking instability and poor handling.

Genuine Powerflex Approved Distributor. Product Specific Notes: This is an insert to fit into and fills the voids in the original rubber bush. This bush fits the following RWD vehicles: 964 C2 1992-1994 Triptronic - Transmission type A50.02/A50.03 993 C2 1994-1998 Manual - Transmission type G50.20/G51.21/G50.32/G50.33 993 C2 1994-1998 Tiptronic - Transmission type A50.04/A50.05.

Which Type Of Powerflex Bushes Do You Require?. Before you order these brilliant Powerflex bushes just ask yourself what you want them to achieve?. Unlike old technology Poly bushes any increase in vibration / harshness felt through the vehicle is normally undetectable.

POWERFLEX BUSHES & MOUNTS > BUSHES & INSERTS. POWERFLEX FRONT Anti-roll-bar to Chassis Bushes (QTY PER CAR 2) TO FIT Porsche 911 Carrera 2/4 Turbo & RS 964 89-93. However that is not the whole story.

[MobileDescription].

Porsche 911 Classic (78-89) Turbo Powerflex Black Series Rear Trailing Arm Support Plate Bushes PFR57-409BLK. Powerflex Black Rear Trailing Arm Support Plate Bushes for: Porsche 911 Classic (78-89) Turbo.

Genuine Powerflex Approved Distributor. Bush Number on Diagram: 22. Set Content 1 Set Content 2 Set Content 3 Replaces O.E Part Number (if applicable): 96437505502, 96437505580. Add to Favourites.