Radio Antennas

When fully extended, the overall length (including mounting base) is approx 37.5cm.

Windom Off - Centre Fed Dipole. Wire antennas are a great simple way to work 40M and 80M rather than a noisy vertical antenna that requires horizontal radials. Very high quality components used throughout the antenna for long life cycle.

1pc BNC Connector Antenna. Material:stainless steel.

Our XL Springer Aerial with a Large 7" Turbo Mag mount. Large CB Radio Antenna with 7” Magnetic Mount. Undoubtedly the most popular pre-tuned CB trucking antenna, virtually indestructible. Whip: 17/7 ph Stainless Steel.

CB MINI MAG CENTRE LOAD ANTENNA. The Sigma compact centre load antenna complete with magnetic base, coax cable and PL 259 connector, all ready to go with easy tune preset SWR whip markings. This antenna will not perform as well as the larger CB aerials, but it is very useful for those who need a more compact aerial.

We will try our best to reduce the risk of the custom duties. Universal fits most models.

Closed with F Connector:21cm. Fully extened with F Connector:98.5cm. We will try our best to reduce the risk of the custom duties. 2.7 section 21cm long or 98.5cm extended.

" * Replacement 60cm 6 Sections Telescopic Antenna Aerial for Radio TV * 6 sections telescopic antenna aerial. * Ideal replacement part for radio equipment, television, car antennas, phone antennas, etc. * Mounting Hole Diameter : 0.3cm / 0.118" * Material : Steel, Brass * Color : Silver Tone * Weight : 20g Unstretched Length : 15.8cm / 6.2"" Max. Diameter : 0.6cm / 0.

10W Antenna NA771 SMA Dual Band Nagoya Female 144/430MHz for Baofeng UV5R UV-82. The Nagoya NA-771 Whip Antenna will allow you to get longer range on your radio. This antenna features a 2.15 dB signal with up to 10W of power.

The Original Mini Stinger. Known for it's flex i bil i ty and strength the Original Mini Stinger will ensure years of use. a 17.7ph Stainless Steel whip, finished in high quality red powder coating.

They are a compact design and are designed for open field, camping, garden or a trip to the park, on the balcony in a flat, boat or anywhere a wire antenna isn't practical, They could be permanently fitted outside but would need to have the capacitor Enclosed.

REVCO MA200 MAG MOUNT AND RG3F WHIP ANTENNA COMPLETE WITH LEAD.

The most popular rugged base loaded CB antenna available on the market. Whip 17.7 ph Stainless Steel. Body Mount Kit Black Springer/Stinger. Coil length 150 mm. e.g. through a veh icle roof. It will require a 10 mm hole to be drilled.

I HAD THIS ANTENNA MADE UP TO G7FEK's ORIGINAL DESIGN (SEE PDF LINK BELOW). IT IS VERY COMPACT (ABOUT 14m LONG), SO IT'S IDEAL FOR SMALL GARDENS.

70cm Slim-Jim. Made in the UK by Superyagi Antennas. Just wanted to say how well the 70cm Slim Jim is performing here locally. As you know I just love the inverted V for 2,4,6m. Anyway! It will surely boom out!

Superb quality dipole antenna. Mounting bar and pole mounting bracket on request for an extra £8. 1kW Rated.

MAR-300 Fixed Fibreglass Marine Antenna Features. The MAR-300 is a robust marine radio antenna - which supports all UK, EU & international marine rado frequencies. Designed as a fixed antenna, it has a right-angle mounting bracket and is designed to be mounted to any vertical surface on a boat.

NEW COMPLETE TWIN WIRE 7 BAND HF COBWEB BASE ANTENNA. A dipole or a CobWeb has a gain of about 5dB over a dipole in free space. The cobweb is fully Omnidirectional so no need for expensive rotators.

This principle has been. Antenna has waterproof junction boxes. Low radiation angle of 30 to 40 degrees on 80m. Low VSWR is achievable on most bands and, with careful installation, up to four bands can be used without ATU.

How it works: The antenna is fed using 50 Ohm coax via a SO-239 socket at the base of the unit. The antenna is rated at 400W pep. The antenna can be grounded if the user experiences excessive local static noise, but as the UNUN is DC grounded: grounding will not affect the tuning ratios.

Swr <1:1.5 (no need for an atu). Resonant on 40m, 20m, 15m and 10m bands. 20m long (approx). Full half wave on 40m band. Each antenna has been carefully set up on the bench and tested in the field with high power rf (400w cw) to ensure each one is working perfectly.

SHORT STUBBY AERIAL 65mm. THIS AERIAL WILL FIT THE BMW MINI R50 AND R53 MODELS. SHORT AERIAL TO FIT FOLLOWING VEHICLES.

A CB mount designed to fit onto a horizontal arm of a mirror, roof racks etc. The most popular rugged base loaded CB antenna available on the market. Whip 17.7 ph Stainless Steel. Flat Bar Mirror Mounting Kit With Black Mini Springer/Stinger.

MCR COMMUNICATIONS LW-20-DX HF 80 -6m Multiband Long Wire Antenna. The MCR COMMUNICATIONS LW-20-DX Long wire Antenna. LW-20-DX 80 -6m Multiband Long Wire Antenna / Aerial. LW-20-dx : 20m in length, this will work on all bands from 80m - 6m via an ATU.

Max power: 50W. Connector: BNC. Antenna Length: 30CM. 1 x Antenna. Cable: RG-174 Cable. V.S.W.R.: Less 1.5.

The antenna is rated at 400 watts PEP. How it works: The antenna is fed using 50 Ohm coax via a SO-239 socket at the base of the unit. The antenna can be grounded if the user experiences excessive local static noise, but as the UNUN is DC grounded: grounding will not affect the tuning ratios.

This is a small LF and HF reception only active antenna, great if you are limited by space. Excellent solution when it is difficult to install a half-wave dipole or you want to avoid potential objections from your neighbours.

Sigma HF 360 plus kit 40m/80m

Tested,working,Made in Germany old rotator,was used 20 years whith small antenna for 70cm.Its not fully automatic you need to push the button to be moved the aerial.I will send whith Parcel force via post office

The antenna is best mounted outside where a 4 to 5 mile range can be achieved and up to 2 miles If mounted in a loft space. Mounting Pole Bracket or Wall bracket (U bolts inc ). Low wind resistance.

Mirror arm type 3/8 stud antenna mount for CB Antenna and Amateur Ham Radio that use the standard 3/8" UNF threaded fixing. Heavy duty with double groove.

Black Tornado Stinger Antenna full size Springer Orbitor Rugged 4x4 CB radio Aerial. Black XL springer CB aerial. Whip: 17/7 ph Stainless Steel. Undoubtedly the most popular pre-tuned CB trucking antenna, virtually indestructible.

Description:   Specifications 1. Universal fits most models 2. 7 section 22cm long or 115cm extended  Closed with F Connector:22cm Fully extened with F Connector:115cm 3. Diameter of Aerial:8mm Diameter of F connector:11mm     Package included > 1 x Telescopic Aerial(Not include radio) Country/Region of Manufacture China Brand Unbranded MPN Does Not Apply EAN Does Not Apply To Fit Universal.

I can not see any makers marks.

Here is a clark scam mast base unit new but too late a part for my mast so no longer needed

Good condition,Working with BNC patch lead and manual but missing the 2nd loop! so keep in the loop by saving us to your favourites, a bargain might just crop up!

ADD TO FAVS.

Spiderbeam Heavy Duty fiberglass poles are perfect for building all kinds of wire antennas. Spiderbeam 12m Heavy Duty poles are very well suited for building 40/80/160m wire GP or inverted L antennas.

The Original Stinger. We are the original manufacturers of the Stinger and have been making this antenna in Birmingham since 1992. Known for it's flex i bil i ty and strength the Original Stinger will ensure years of use.

Insulated high power antenna wire. solderable and very easy to work with. fit the best. any length you want available.

These rare iconic radios date from the late 60s and were the answer to the Pye PF2s ,could be used for film ,theatricals and police or fire service replica vehicle owners, to give that finishing touch.

It may be mounted straight, as an inverted vee or sloper. It may also be bent or dog-legged to fit in available garden space. Type: End Fed Wire Antenna. Band: 160-6m. Non-Kink Poly Weave Wire. Made in Great Britain.

Don't buy any balun without seeing there data ! Ask why they are not providing this important information to you ?. A minimum 20 db is the acceptable common mode choking for a balun. Why buy from us . we have spent hundreds of hours in designing these highly efficient balun.