Scantronic

1x Scantronic 9651EN43 Alarm Panel. 1x Remote Keypad. Keyswitch Key-switch zone, full = A, part = B setting/unsetting, disarm and reset. Simple A, B, C and D setting buttons let you to split the system into four areas, enabling you to set the whole, or just parts of the alarm protection.

It also eliminates the need for running cables, which would be difficult and unsightly. These Wireless vibration shock sensors are used but are in good working order and condition as you can see in the pictures.

Global tamper. Communication output. Accepts up to 2 remote 9427 Style keypads.

Brand new scantronic alarm panel and keypad with instructions. Still in packaging never been fitted

2 used Scantronic 9930EUR-00 keypads available. Both tested and working fine. You are buying one complete keypad but will sell both at a discounted rate.

Scantronic 500r wireless PIR in perfect working order. Radio frequency is 433mhz.

Scantronic 9651EN41. Keyswitch Key-switch zone, full = A, part = B setting/unsetting, disarm and reset. 8 Zone Alarm Panel. Simple A, B, C and D setting buttons let you to split the system into four areas, enabling you to set the whole, or just parts of the alarm protection.

Works fine

Brand new un-used boxed, 4 hand held units, controller with aerial. See other items thanks for looking.

this is a Scantronic 9827 keypad in unused condition (new boxed).

Brand new . Left over from a job.

Scantronic 9651 PCB. Complete with.

Scantronic 9600 motherboard, expansion board, keypad and instructions. All taken from a working system

NOS garage clear out panel and remote keyboard untested but unused tatty box. Item is heavy hence postage costs. See other items for more alarm equipment.

Scantronic I-on Expander Condition is Used. Dispatched with Royal Mail 1st Class.

The 9941 has no detector coil fitted.

Scantronic 4612 Two Channel Radio Receiver in full working order

Scantronic 3000 Remote Keypad Product number 6336 I found this very rare keypad whilst clearing out my loft , it was for a Modern Alarms Scantronic 3000 system , I'm sure that it will work on the Scantronic 9100 control panel too . It's brand new and still in its original box , it dates back to the late 1980's / early 1990's . I prefer buyer to collect but will pack and post if required .

Eaton / Scantronic wireless smoke detector.

Job lot of 28 x Scantronic 762REUR-00 2-Channel Narrow Band Receiver for 700 Series, all in excellent condition been removed from and old job fully working. and also 13 x Scantronic 706REUR-00 Long Range Hand Held Radia Transmitter With Belt Clip, fully working when removed from old job.

1x Scantronic 9651EN43 Alarm Panel. 1x Remote Keypad. Keyswitch Key-switch zone, full = A, part = B setting/unsetting, disarm and reset. Simple A, B, C and D setting buttons let you to split the system into four areas, enabling you to set the whole, or just parts of the alarm protection.

Security Intruder Alarm Scantronic Eaton 9943 keypad. Complete with instructions and 2 x fobs.

Boxed scantronic movement sensor 714reur-00 Old stock never used without battery as out of date Tested ok

SCANTRONIC 9600.

Working fine excellent condition Has prongs for tag reader See my listings for reader

SPEECH DIALER SD1 NEW HAVING A CLEAROUT.

Security Intruder Alarm Scantronic 9930 keypad. Keypad fully tested works perfectly.

(Compatible also with Scantronic AX10 Remote PROX reader Genuine Scantronic (Cooper / Eaton Security) product. Is this possible?. Find what you are looking for! A) We will endeavour to do this for you but this will not always be possible.

Scantronic 9827 remote keypad never been used and still in its original box.

I'm selling my scantronic 9651 alarm system with keypad. In full working order and has served me well. Home improvements forces sale This panel has 8 zones with 4 areas. This is for the keypad, the control panel and a GJD HYL004 auto dialler. Images show unit wired up. I have copies of installation/ user manuals for both the control panel and the auto dialler I can share the wiring that was setup on mine if that helps you get started Feel free to ask any questions. Thanks

Security Intruder Alarm Scantronic 9600 Keypad .Fully tested , ready to fit. For use with scantronic 9600 panels. Very clean keypad

I understand that these batteries are fairly standard for an intruder alarm. This box can accept the 660 SPEACH COMMUNICATOR (not supplied) which is a small digital recorder that can be fitted within the panel.

Scantronic 908 expander never used in box. Box is scruffy. Part No 908-00

(Compatible also with Scantronic AX10 Remote PROX reader Genuine Scantronic (Cooper / Eaton Security) product. A) All of our prices are subject to fluctuation and the item would have now been put within a deal, hence the price decrease.

Selling a scantronic I-kp01 keypad removed from a luxury flat. In perfect working order. Please see my other items for sale

Used keypad please see pictures for condition. You get what you see only, came from a working site For alarm panel 9800 to replace 9800 keypad

Selling 1 x Scantronic Security Wireless Shock Sensor 738REUR-00 White. Used but in very good condition. DOES NOT COME WITH BATTERY but price has been dropped to allow buyer to purchase new ones and have safe peace of mind. I have lots to sell so if you would like a deal please feel free to contact me

Scantronic 9800 Alarm keypad for sale. Tested and working before removed. Any questions please ask.

Scantronic security Alarm Panel 9651EN43 with Remote Keypad & 1 Proximity Fob. 1x Scantronic 9651EN43 Alarm Panel. 1x Remote Keypad. Keyswitch Key-switch zone, full = A, part = B setting/unsetting, disarm and reset.

All working fine Reset to factory settings

Scantronic 9427 keypad for use with the Scantronic 9448 alarm panel.

Scantronic 9651en-43 Alarm panel No keypad Fob system

SCANTRONIC 8 ZONE HARD WIRED EXPANDER UNIT 9954EN-00, SECURITY AND ALARMS (no screws in lid and no jumper links)