Do these parts fit your vehicle? Find out now.

  • Quality Exhaust Tail Pipe Chrome Trim Tip End Muffler 35mm-48mm (Fits: Bedford)

    CHROME PLATED TAIL PIPE 35mm min to 48mm diameter max 145mm long Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 48mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 35mm AND NO MORE THAN 48mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £7.50
    Brand: Unbranded
    Free postage
    136 sold
  • Full Exhaust Silencer Repair Bandage Rap Around Fix Heat Proof (Fits: Bedford)

    SILENCER REPAIR BANDAGE The undisputed worlds number 1 repair bandage. Ideal for larger holes and splits in silencer and exhaust systems. Asbestos free, permanent exhaust repair. Quick simple and easy to use. Specification: Exhaust repair bandage Foil heat shield Fixing wire. Full instructions are given on the back of the packaging but here is a brief into onto how it works: 1.Clean off the dirt and loose rust from the damaged area. Position foil strip over the hole where it acts as a heat shield. 2.Moisten bandage with water until pliable. 3.Firmly wind bandage fully around the silencer with 25mm overlaps to give double coverage over the repair. 4.Retain bandage in position with fixing wire as a temporary support until it hardens under the action of heat from the exhaust. Fast Dispatch.
    £4.29
    Brand: Unbranded
    Free postage
    208 sold
  • Car Van Exhaust Tip Curved Muffler Replacment Chrome Tail Pipe 50mm-67mm (Fits: Bedford)

    CURVED CHROME PLATED TAIL PIPE 50mm-67mm diameter max 230mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 70mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 40mm AND NO MORE THAN 70mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £15.50
    Brand: Unbranded
    Free postage
    65 sold
  • 63mm Car LED Light Exhaust Muffler Tail Pipe Tip Universal Bend Spitfire Flaming (Fits: Bedford)

    1Pc Universal 63mm Car Spitfire Flaming LED Red Light Exhaust Pipe Muffler Tip. Fit for : car pipe need be smaller than 63mm. Sprayer front end: there is a muffler spoiler, two silencer spoiler network to play two muffler spoiler effect, coupled with the fire booster cap to make the sound smaller, more powerful.
    £12.99
    Brand: Unbranded
    Free postage
    or Best Offer
  • Tail Pipe Chrome Polised Racing Look Exhaust Rear Cover Tip 35mm-65mm (Fits: Bedford)

    CHROME PLATED TAIL PIPE 35mm min to 65mm diameter max 145mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 65mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 45mm AND NO MORE THAN 65mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £14.50
    Brand: Unbranded
    Free postage
  • Silencer Repair Bandage Exhaust With Flexi Wrap Fix Fit Holes Rattles Box Heat (Fits: Bedford)

    FLEXIBLE EXHAUST WRAP WITH SILENCER REPAIR BANDAGE The undisputed worlds number 1 repair bandage with a flexible exhaust wrap. Ideal for larger holes and splits in silencer and exhaust systems. Asbestos free, permanent exhaust repair. Quick simple and easy to use. This Flexible Exhaust Wrap is quick and easy to use and can be applied to the straight pipe in minutes with the aid of a screwdriver - without the need to dismantle the exhaust system. Specification: Exhaust repair wrap Exhaust repair bandage Foil heat shield Fixing wire. Full instructions are given on the back of the packaging. Fast Dispatch PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models.
    £9.95
    Brand: Unbranded
    Free postage
  • Quality Exhaust Shiny Tail Pipe Chrome Trim Tip End 40mm-70mm (Fits: Bedford)

    CHROME PLATED TAIL PIPE 40mm min to 70mm diameter max 145mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 70mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 40mm AND NO MORE THAN 70mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £12.49
    Brand: Unbranded
    Free postage
    156 sold
  • 1x Universal Real Carbon Fiber 63mm 114mm Carbon Fiber Exhaust Tips - Glossy (Fits: Bedford)

    1pcs Car Carbon Fiber Exhaust Tip Muffler Pipe Universal Pipes Tail 63mm 2.5"Inlet 114mm 4.5"Outlet. Size:Inlet 63mm & Outlet 114mm (2.5"Inlet 4.5"Outlet). (1)Car model just as reference. This size(63mm 2.5"Inlet 114mm 4.5"Outlet) universal fits most of car .
    £29.67
    Brand: Unbranded
    Free postage
    or Best Offer
  • Sports Road 36mm-51mm Chrome Plated Steel Curved Ended Exhaust Tail Pipe Car Van (Fits: Bedford)

    Exhaust Tail Pipe Curved Chrome Plated SteelFitting Diameter (Min-Max): 36mm-51mm Length: 230mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £8.99
    Brand: Unbranded
    Free postage
  • Exhaust Medium Pot Bedford Blitz 1.8 +2.0 (Cf97) 1969-1987 (Fits: Bedford)

    (06) () Accessories: 1 x 250-258). To find the part best for your car, we need the key number 2 (or 2.1) and 3 (or 2.2). For more details, see above under. Thus we can ensure that the parts ordered to fit your vehicle.
    £94.68
    From Germany
    £63.09 postage
    Brand: Unbranded
  • Sports Road 38mm-57mm Chrome Plated Steel Curved Ended Exhaust Tail Pipe Car Van (Fits: Bedford)

    Exhaust Tail Pipe Curved Chrome Plated SteelFitting Diameter (Min-Max): 38mm-57mm Length: 230mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £9.49
    Brand: Unbranded
    Free postage
  • Full Exhaust Silencer Repair Bandage Rap Fix Heat Proof Metal Fixing Spare Part (Fits: Bedford)

    FLEXIBLE EXHAUST WRAP Straight Pipe Repair. Ideal for larger holes and splits in silencer and exhaust systems. Asbestos free, permanent exhaust repair. Quick simple and easy to use. This Flexible Exhaust Wrap is quick and easy to use and can be applied to the straight pipe in minutes with the aid of a screwdriver - without the need to dismantle the exhaust system. Specification: Exhaust repair wrap Foil heat shield Fixing wire. Full instructions are given on the back of the packaging but here is a brief into onto how it works: 1. Clean off the dirt and loose rust from the damaged area. Position foil strip over the hole where it acts as a heat shield. 2. Place the wire cloth over the hole and then wrap. 3. Firmly wind bandage fully around the silencer with 13mm overlaps to give double coverage over the repair. 4.
    £8.65
    Brand: Unbranded
    Free postage
  • Full Exhaust Silencer Repair Bandage Rap Around Fix Heat Proof For Bmw (Fits: Bedford)

    SILENCER REPAIR BANDAGE The undisputed worlds number 1 repair bandage. Ideal for larger holes and splits in silencer and exhaust systems. Asbestos free, permanent exhaust repair. Quick simple and easy to use. Specification: Exhaust repair bandage Foil heat shield Fixing wire. Full instructions are given on the back of the packaging but here is a brief into onto how it works: 1.Clean off the dirt and loose rust from the damaged area. Position foil strip over the hole where it acts as a heat shield. 2.Moisten bandage with water until pliable. 3.Firmly wind bandage fully around the silencer with 25mm overlaps to give double coverage over the repair. 4.Retain bandage in position with fixing wire as a temporary support until it hardens under the action of heat from the exhaust. Fast Dispatch.
    £4.29
    Brand: Unbranded
    Free postage
  • Replacement Curved Car Exhaust Chrome Tail Pipe 38mm To 57mm (Fits: Bedford)

    CURVED CHROME PLATED TAIL PIPE 38mm min to 57mm diameter max 230mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 57mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 38mm AND NO MORE THAN 57mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £9.49
    Brand: Unbranded
    Free postage
  • Quality Exhaust Tail Pipe Chrome Trim Tip End Muffler 39mm-49mm (Fits: Bedford)

    CHROME PLATED TAIL PIPE 39mm min to 49mm diameter max 145mm long Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 49mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 39mm AND NO MORE THAN 49mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £7.99
    Brand: Unbranded
    Free postage
  • Quality Stainless Steel Car Racing Sport Look Exhaust Tail Trim 55mm-80mm (Fits: Bedford)

    Stainless Steel Tail Pipe External Diameter: 89mm Internal Fitment: 55mm Min to 80mm Max Length: 152mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 55mm and no more than 80mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £15.99
    Brand: Unbranded
    Free postage
  • Sports Road 35mm-48mm Chrome Plated Steel Straight Exhaust Tail Pipe Kit Car Van (Fits: Bedford)

    Exhaust Tail Pipe Straight Chrome Plated SteelFitting Diameter (Min-Max): 35mm-48mm Length: 145mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £7.50
    Brand: Unbranded
    Free postage
  • Quality Stainless Steel Car Racing Sport Look Exhaust Tail Trim 37mm-55mm (Fits: Bedford)

    Stainless Steel Tail Pipe External Diameter: 63mm Internal Fitment: 37mm Min to 55mm Max Length: 152mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 37mm and no more than 55mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £12.75
    Brand: Unbranded
    Free postage
    5 watching
  • Quality Stainless Steel Car Racing Sport Look Exhaust Tail Trim 38mm-65mm (Fits: Bedford)

    Stainless Steel Tail Pipe External Diameter: 70mm Internal Fitment: 38mm Min to 65mm Max Length: 152mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 38mm and no more than 65mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £13.25
    Brand: Unbranded
    Free postage
    6 watching
  • Replace Rusty Broken Car Exhaust Back Box Tail Trim Curved 36mm To 51mm (Fits: Bedford)

    CURVED CHROME PLATED TAIL PIPE 36mm min to 50mm diameter max 230mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 75mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS LESS THAN 36mm AND NO MORE THAN 50mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £8.99
    Brand: Unbranded
    Free postage
  • Car Rear Box Bumper Tail Tip Petrol Or Diesel 48mm-75mm (Fits: Bedford)

    CHROME PLATED TAIL PIPE 48mm min to 75mm diameter max 145mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 75mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 48mm AND NO MORE THAN 75mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £13.50
    Brand: Unbranded
    Free postage
    12 watching
  • Quality Stainless Steel Car Racing Sport Look Exhaust Tail Trim 25mm-38mm Curved (Fits: Bedford)

    Curved Stainless Steel Tail Pipe External Diameter: 51mm Internal Fitment: 25mm Min to 38mm Max Length: 200mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 25mm and no more than 38mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £14.99
    Brand: Unbranded
    Free postage
  • Shiny Tail Pipe Sporty Lookcar Van Exhaust Tail Connector Pipe Screw Fit 40mm-52 (Fits: Bedford)

    CHROME PLATED TAIL PIPE 40mm min to 52mm diameter max 145mm long Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 48mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 40mm AND NO MORE THAN 52mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £10.75
    Top Rated Plus
    Free postage
    Brand: Unbranded
  • Chrome Plated Motor Car Curved Exhaust Trim Tail End 34mm To 43mm Push Screw On (Fits: Bedford)

    CURVED CHROME PLATED TAIL PIPE 34mm min to 43mm diameter max 230mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 48mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS MORE THAN 34mm AND NO MORE THAN 43mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end. Fast Dispatch PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your .
    £7.99
    Brand: Unbranded
    Free postage
  • Sports Road 48mm-75mm Chrome Plated Steel Straight Exhaust Tail Pipe Kit Car Van (Fits: Bedford)

    Exhaust Tail Pipe Straight Chrome Plated SteelFitting Diameter (Min-Max): 48mm-75mm Length: 145mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £13.50
    Brand: Unbranded
    Free postage
  • Sports Road 39mm-49mm Chrome Plated Steel Straight Exhaust Tail Pipe Kit Car Van (Fits: Bedford)

    Exhaust Tail Pipe Straight Chrome Plated SteelFitting Diameter (Min-Max): 35mm-48mm Length: 145mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification.
    £7.99
    Brand: Unbranded
    Free postage
  • Sports Road 32mm-45mm Chrome Plated Steel Straight Exhaust Tail Pipe Kit Car Van (Fits: Bedford)

    Exhaust Tail Pipe Straight Chrome Plated SteelFitting Diameter (Min-Max): 32mm-45mm Length: 145mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £9.50
    Brand: Unbranded
    Free postage
  • Finishing Chrome Tail Pipe Replacing Rusty Old Exhaust Tip 32mm To 45mm (Fits: Bedford)

    CHROME PLATED TAIL PIPE 32mm min to 45mm diameter max 145mm long Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 45mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NO LESS THAN 35mm AND NO MORE THAN 45mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end. PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models.
    £9.50
    Brand: Unbranded
    Free postage
    56 sold
  • Quality Car Racing Sport Look Exhaust Tail Trim 37mm To 53mm Curved (Fits: Bedford)

    CURVED CHROME PLATED TAIL PIPE 37mm min to 54mm diameter max 230mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 54mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 37mm AND NO MORE THAN 54mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £10.95
    Brand: Unbranded
    Free postage
    32 sold
  • Finishing Chrome Tail Pipe Replacing Rusty Old Exhaust Curved Tip 48mm To 58mm (Fits: Bedford)

    CURVED CHROME PLATED TAIL PIPE 48mm min to 58mm diameter max 230mm length Can be used on Van Jeep Mpv Caravan Motorhomes Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 58mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 48mm AND NO MORE THAN 58mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £13.75
    Brand: Unbranded
    Free postage
    15 sold
  • Sports Road 37mm-53mm Chrome Plated Steel Curved Ended Exhaust Tail Pipe Car Van (Fits: Bedford)

    Exhaust Tail Pipe Curved Chrome Plated SteelFitting Diameter (Min-Max): 37mm-53mm Length: 230mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £10.95
    Brand: Unbranded
    Free postage
  • Quality Stainless Steel Car Racing Sport Look Exhaust Tail Trim 26mm-45mm (Fits: Bedford)

    Stainless Steel Tail Pipe External Diameter: 54mm Internal Fitment: 26mm Min to 45mm Max Length: 152mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 35mm and no more than 55mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £12.25
    Brand: Unbranded
    Free postage
  • Sports Road 48mm-58mm Chrome Plated Steel Curved Ended Exhaust Tail Pipe Car Van (Fits: Bedford)

    Exhaust Tail Pipe Curved Chrome Plated SteelFitting Diameter (Min-Max): 48mm-58mm Length: 230mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £13.75
    Brand: Unbranded
    Free postage
  • Car Van Exhaust Tip Muffler Replacment Chrome Tail Pipe 37mm-54mm (Fits: Bedford)

    CHROME PLATED TAIL PIPE 37mm min to 54mm diameter max 230mm length Ideal for giving your car a sporty look. Cover up a rusting tail pipe. Replace a corroded trim. Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust Comes with fitting clamps PLEASE NOTE BEFORE ORDERING THESE TAIL PIPE COVERS ARE 54mm DIAMETER - YOU MUST ENSURE THAT YOUR EXHAUST PIPE IS NOT LESS THAN 37mm AND NO MORE THAN 54mm IN ORDER FOR THIS PRODUCT TO FIT. DUE TO THE VAST AMOUNT OF CAR MODELS SPECIFICATIONS OUT THERE THE CAR MODELS LISTED ABOVE ARE FOR GUIDANCE ONLY. Also will not fit on pipes that are curved at the end.
    £10.25
    Brand: Unbranded
    Free postage
    7 watching
  • Quality Stainless Steel Car Racing Sport Look Exhaust Tail Trim 35mm-60mm Curved (Fits: Bedford)

    Curved Stainless Steel Tail Pipe External Diameter: 70mm Internal Fitment: 35mm Min to 60mm Max Length: 200mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 35mm and no more than 60mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £12.95
    Brand: Unbranded
    Free postage
  • Sports Road 40mm-70mm Chrome Plated Steel Straight Exhaust Tail Pipe Kit Car Van (Fits: Bedford)

    Exhaust Tail Pipe Straight Chrome Plated SteelFitting Diameter (Min-Max): 40mm-70mm Length: 145mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £12.49
    Brand: Unbranded
    Free postage
  • Quality Stainless Steel Car Racing Sport Look Curved Exhaust Tail Trim 38mm-65mm (Fits: Bedford)

    Curved Stainless Steel Tail Pipe External Diameter: 76mm Internal Fitment: 38mm Min to 65mm Max Length: 205mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 38mm and no more than 65mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £15.99
    Brand: Unbranded
    Free postage
    3 watching
  • Sports Road 50mm-67mm Chrome Plated Steel Curved Ended Exhaust Tail Pipe Car Van (Fits: Bedford)

    Exhaust Tail Pipe Curved Chrome Plated SteelFitting Diameter (Min-Max): 50mm-67mm Length: 230mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £15.50
    Brand: Unbranded
    Free postage
  • 1pc Universal Car 304 Stainless Steel Exhaust Silencer 51MM Exit Exhaust Muffler (Fits: Bedford)

    Size: 51mm. Material: 304 Stainless Steel. 1 x Exhaust pipe. We will try our best to make you satisfy.
    £20.60
    From China
    Was: Previous price£22.89
    Brand: Unbranded
    Free postage
    or Best Offer
  • Sports Road 40mm-52mm Chrome Plated Steel Straight Exhaust Tail Pipe Kit Car Van (Fits: Bedford)

    Exhaust Tail Pipe Straight Chrome Plated SteelFitting Diameter (Min-Max): 40mm-52mm Length: 145mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £10.75
    Top Rated Plus
    Free postage
    Brand: Unbranded
  • Quality Stainless Steel Car Racing Sport Look Exhaust Tail Trim 30mm-50mm (Fits: Bedford)

    Stainless Steel Tail Pipe External Diameter: 60mm Internal Fitment: 30mm Min to 55mm Max Length: 152mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 35mm and no more than 55mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £12.50
    Brand: Unbranded
    Free postage
  • Sports Road 37mm-54mm Chrome Plated Steel Straight Exhaust Tail Pipe Kit Car Van (Fits: Bedford)

    Exhaust Tail Pipe Straight Chrome Plated SteelFitting Diameter (Min-Max): 37mm-54mm Length: 145mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £9.99
    Brand: Unbranded
    Free postage
  • Sports Road 35mm-65mm Chrome Plated Steel Straight Exhaust Tail Pipe Kit Car Van (Fits: Bedford)

    Exhaust Tail Pipe Straight Chrome Plated SteelFitting Diameter (Min-Max): 35mm-65mm Length: 145mm Simple to fit: Slide over original exhaust and tighten down Comes with fitting clamps PLEASE NOTE BEFORE ORDERING: MAKE SURE ORIGINAL EXHAUST PIPE IS BETWEEN FITTING DIAMETER WILL NOT FIT CURVED ENDED PIPES Fast Dispatch - Free UK Delivery PLEASE NOTE Important notice BEFORE ordering Please DO NOT rely on the compatibility list to make your decision of parts, as cars come with many variations and fitments on the same make and models. Check things like dimensions size and other stated fitment criteria prior to ordering to make sure you get the correct part as vehicle parts can have more than one option due to changes on chassis / engine number or modification. We cannot be held.
    £14.50
    Brand: Unbranded
    Free postage
  • 2.5" SUV Car Modify Muffler Exhaust Pipe Tip Resonator Polished Bent Steel (Fits: Bedford)

    Universal Exhaust Muffler Resonator 304 Stainless Steel 2.5" Inelt 2.5" Outlet. Perfectly decorate the exhaust pipe of your car. Exhaust tip has corrosion resistance to alkali solution and most organic and inorganic acids.
    £20.60
    From China
    Was: Previous price£22.89
    Brand: Unbranded
    Free postage
    or Best Offer
  • Universal 2.5"Stainless Steel Chrome Car Exhaust Muffler Middle Tornado Silencer (Fits: Bedford)

    Perfectly decorate the exhaust pipe of your car. Material: Stainless Steel. Exhaust tip has corrosion resistance to alkali solution and most organic and inorganic acids. Body Type: 100mm/3.94" Round.
    £29.66
    From China
    Was: Previous price£34.89
    Brand: Unbranded
    Free postage
    or Best Offer
    125 watching
  • Quality Stainless Steel Car Racing Sport Look Exhaust Tail Trim 35mm-60mm (Fits: Bedford)

    Stainless Steel Tail Pipe External Diameter: 70mm Internal Fitment: 35mm Min to 60mm Max Length: 152mm Ideal for giving your car a sporty look Cover up a rusting tail pipe. Replace a corroded trim. No rust due to stainless steel material Looks fantastic when fitted Simple to fit simply slides over and tightens down onto the original exhaust PLEASE NOTE BEFORE ORDERING You must ensure that your exhaust pipe is not less than 35mm and no more than 60mm in order for this product to fit. Due to the vast amount of car models specifications out there the car models listed above are for guidance only. Also will not fit on pipes that are curved at the end.
    £12.95
    Brand: Unbranded
    Free postage
  • 1 x Stainless 63mm/2.5'' 310mm Long Car Exhaust Muffler Silencer Tornado Muffler (Fits: Bedford)

    Universal Exhaust Dissipative Muffler 304 Stainless Steel 2.5" Inelt 2.5" Outlet. Perfectly decorate the exhaust pipe of your car. Exhaust tip has corrosion resistance to alkali solution and most organic and inorganic acids.
    £29.66
    From China
    Was: Previous price£34.89
    Brand: Unbranded
    Free postage
    or Best Offer
    20 watching
  • 63mm/114mm 100% Real Carbon Fiber Car SUV Exhaust Refit Muffler Pipe Universal*1 (Fits: Bedford)

    1pcs Car Carbon Fiber Exhaust Tip Muffler Pipe Universal Pipes Tail 63mm 2.5"Inlet 114mm 4.5"Outlet. Size:Inlet 63mm & Outlet 114mm (2.5"Inlet 4.5"Outlet). (1)Car model just as reference. This size(63mm 2.5"Inlet 114mm 4.5"Outlet) universal fits most of car .
    £36.89
    From China
    Free postage
    Brand: Unbranded
    or Best Offer
    37 watching

Got one to sell?

Get it in front of 17+ million UK buyers.