mosfet power amplifier

EBB 500 Mosfet Amplifier Module. Output power (1KHz continuous sine Vs= ±90V): 496W RMS (992W pk) into 8 ohms. 740W RMS (1480W pk) into 4 ohms. Two modules will be required for stereo amplifiers. This amplifier is exclusively designed and produced for us.

Input sensitivity: 2.8mV (MM), 200mV (line). Signal to noise ratio: 86dB (MM), 106dB (line). Power output: 45 watts per channel into 8Ω (stereo). I bought this amp new in 2002. Can power 2 sets of speakers if required.

HAS UP TO DATE SAFETY TEST, TRIED AND WORKING, WOULD NEED UPWARDS OF 700ma FOR FULL OUTPUT, DETAILS ON REAR OF CASE. COULD BE RACK MOUNTED OR STAND ALONE. CAN COLLECT IF YOU WISH.

Input sensitivity 500mv RMS. Slew rate 65V/us.

Input Sensitivity: 860mV (2.43V pk-pk) @125W. EBB 150 Mosfet Amplifier Module. Output power (1KHz continuous sine Vs= ±55V): 128W RMS (253W pk) into 8 ohms. 210W RMS (418W pk) into 4 ohms. This amplifier is exclusively designed and produced for us.

EBB 250 Mosfet Amplifier Module. Output power (1KHz continuous sine Vs= ±80V): 252W RMS (504W pk) into 8 ohms. 380W RMS (760W pk) into 4 ohms. Two modules will be required for stereo amplifiers. This amplifier is exclusively designed and produced for us.

Mains power cable not included.

Sturdy 19"steel housing, 3U. Ibiza AMP-800 DJ PA Power Amplifier 1200 Watt Mosfet. Sturdy 19"steel housing, 3U (height units). MOSFET technology. A practical, great value 2 channel PA Amplifier with 1200 Watts of power!

Classic power amp from top audio manufacturer HH Electronic. This is a two channel professional power amp it can also be bridged for mono output. Its rack mountable and weighs in at around 13KG. Condition wise there are marks and scratches on the casing as seen on the photos but its a very rugged unit that's ready for work.

PRISM AUDIO LA450M MOSFET POWER AMPLIFIER MODULE. MANUFACTURER PART NO: LA450M. MANUFACTURER: PRISM AUDIO.

PRISM AUDIO LA150M MOSFET POWER AMPLIFIER MODULE. MANUFACTURER PART NO: LA150M. MANUFACTURER: PRISM AUDIO.

Both work fine.

All amps are in same condition worn and scuffs due to wear and tear Some sticker marks on front

The HH V800 MOS-FET Power Amplifier is designed for heavy duty continuous operation at high power levels. This rugged HH amplifier will tolerate a good deal of electrical abuse, output short circuits and load mismatch without causing harm to the MOS-FET devices.

Powers up and looks in excellent condition. Have not tested fully as I don't have the necessary cables to connect to the rest of a sound system. Please see my feedback and other listings.

2x 480W @ 4 Ohm 2x 275W @ 8 ohms.

800w bridgeable to 1600w. Google hh mosfet m900 for more info on this amp, its well sought after and they last for years. weight: 22KG.

Ibiza AMP-1000 DJ PA Amplifier Amp 1600W MOSFET. Modern MOSFET technology 1600W max. @ 4 ohms (2 x 600W max. Channel Separation:> 82dB. Suitable for 19 "/ 48cm Rack - 3 height units. 1 x device. Frequency response: 20 Hz to 20 kHz. ).

Hi-Fi Tube Amplifier. Integrated Amplifier. Digital Amplifier. Headphone Amplifier. Mono Channel Power Amplifier | MOSFET | Single-Ended | 30W | PassA30 Circuit. RCA / XLR audio inputs. This is mono channel amplifier, for stereo need buy 2 pieces.

Note:this is a assembled board,have tested well. Frequency response range: 5 HZ - 3 db, 250 k HZ - 3 db. The SR > 20 v/US.

L7 mono MOSFET audio amplifier board kit. Use floating MOSFET driver, designed by LJM. amplifier board kit x 1(include 1 board PCB and all the components on the picture.). kit only, you need solder it by yourself.

Headphone Amplifier. Hi-Fi Tube Amplifier. Integrated Amplifier. Digital Amplifier. High Output Power: can up to 2 80W which excels most amplifiers and ensure the sound quality with strong driving ability.

This is a very good small class A power amp board, the Power transistors using original Japanese Hitachi P-MOS J554, with Excellent Dynamic, Excellentlow-frequency, and Flexible low-frequency. Note: the J554 P-MOS are used.

350W 2R DC -45V. L7 2-channe MOSFET audio amplifier board kit. Use floating MOSFET driver, designed by LJM. amplifier boards kit x 1(include 2 boards and all the components on the picture.). kit only, you need solder it by yourself.

350W 2R DC -45V. L7 2-channe MOSFET audio amplifier board assembled. Use floating MOSFET driver, designed by LJM. amplifier boards assembled x 1(include 2 boards ). CLASS AB class work. Output power of 150W 8R DC - 56V.