suzuki rl 250 beamish

From a Suzuki RL250 (silver engine type). These are two aluminium blanking plates for the oil pump shaft hole and pump housing. For use when running the engines on premixed fuel with the two stroke oil pump removed.

Starts and runs very well. I don't think you would find a more genuine example in such good condition.

GENUINE NGK SPARK PLUG.

Perfect reproduction.

Condition is Used. Collection in person only. Rl 250 beamish. Never used. The fella I bought this from he had this in his loft as a spare from when he bought his bike new. not remanufactured as Iv had this tank for well over 10 years.

Right hand crankcase taken from a silver engined Beamish Suzuki RL250 (engine number was RL250 22546). Embossed with the part number - 2SZ 145 R.

Right hand crankcase taken from a silver engined Beamish Suzuki RL250. Embossed with the part number - 2SZ 145 R.

It does reduce drag and it does give you a tiny HP gain but it ruins your clutch in minutes. Always use the bike manufacturers oil and fill to the right level, another not so clever trick used to gain a tiny power increase is to reduce the oil level in the drivecase, Oils must cool the clutch as well as lubricate it, never cut corners here and never put additives of any sort in drivecase oil which cause plates to stick and glaze, invalidating your warranty and ruining your clutch.

Tools lock onto or into basket or plates and allow proper clutch nut removal and tightening. EBC Clutch Removal / Holding Tool: Suitable for bike listed in title. Fits clutch plate exactly. Note: Images are used as an example only, Item received may vary slightly but will be the correct item for the bike listed in title.

Coil & Diaphragm Springs. All springs get tired and should be replaced at every engine rebuild or clutch overhaul. Clutch springs fall into two basic types Coil springs.

Material: 6061-T6 Aluminum.

THE MUDGUARD WILL NEED DRILLING TO ATTACH.

EBC CLUTCH PLATE SET. FULL SET OF EBC HEAVY DUTY FRICTION PLATES.

THE MUDGUARD WILL NEED DRILLING TO ATTACH. SMARTEN UP YOUR BIKE WITH THIS MUDGUARD. ALSO AVAILABLE IN OTHER COLOURS AND IN PAIRS.

Fingered Control Grip is the 793 EVO with new gripping pads to assist your 2 weakest fingers in holding onto the bars.

Each silencer is supplied with a universal mounting bracket which is bolted to the sliding plate attached. They suit both sides of the motorcycle and can be easily taken apart to add or remove wool/fibre debris noise absorbing materials.

This new and improved high quality 12V ignition coil has a screw in HT lead connection, to prevent your HT lead popping out of your coil. Coil fixing bracket included. This coil is equivalent to Lucas 47276.

Specifications All Balls steering stem bearing kits upgrade loose ball bearings to heavy duty taper bearings replacements.

Also includes a clip to fasten the silencer to the exhaust. Models listed are for reference only may not fit without slight modification as the silencer is universal. FILTERS AIR OIL AND FUEL. Read on.

Model: RL250. Part: Clutch basket. To fit: Suzuki. The information provided above is from a visual inspection of the part available, and is presented in good faith and believed to be correct, Handy motorcycle parts makes no representations or warranties as to the completeness or accuracy of the information.