Skip to main content
  • Myford Ml7 metal lathe

    Myford Ml7 metal lathe

    £350.00
    0 bids
    + £0.00 P&P
    • 35 watching
    The end cover is also missing. The lathe has a reversible motor, has had new belts fitted. The lathe is fixed to a strong bench which has storage cupboards with built in lighting and an inspection lam...
  • Clarke metal  mill /drill lathe CLM500

    Clarke metal mill /drill lathe CLM500

    £230.00
    2 bids
    + £0.00 P&P
    • 78 watching
    Used Clarke Lathe/Mill. Complete with 3 & 4 Jaw Chucks, Centre, Spare Belts, Manual, 13mm Drill Chuck, T Slot Milling Plate. Very heavy - will need a few people or a fork truck. The Pictures are part ...
  • Clarke metal lathe mill /drill  CL500M

    Clarke metal lathe mill /drill  CL500M

    £570.00
    6 bids
    + £0.00 P&P
    • 98 watching
    Mill / drill spindle taper No. 3 MT, Drill capacity 13mm, 12 speed, 212 - 1660 RPM.
  • Raglan 5

    Raglan 5" metal turning lathe(with castor base)

    £450.00
    0 bids
    + £0.00 P&P
    • 36 watching
    Used variable speed lathe just under four foot long but very heavy needs bolting back on base andvariable speed belt needs adjusting as fitted 240v single phase.
  • Clarke CL300M Metal Lathe.

    Clarke CL300M Metal Lathe.

    £265.00
    6 bids
    + £0.00 P&P
    • 85 watching
    Clarke CL300M Lathe, with In the photos the thread-cutting counter is missing from the lathe carriage, but is included in the sale. Collection Only. I have owned this from new. It has been lightly use...
  • Katsu mini metal working lathe

    Katsu mini metal working lathe

    £206.00
    5 bids
    + £0.00 P&P
    • 64 watching
    Variable spindle speed.
  • hobby metal lathe Granvill

    hobby metal lathe Granvill

    £80.00
    0 bids
    + £0.00 P&P
    • 12 watching
    For sale I have a granvill hobby lathe selling as a spares and repairs restoration project I have plugged the motor in and it dose work
  • Toyo ML210 small metal working lathe with accessories

    Toyo ML210 small metal working lathe with accessories

    £105.00
    5 bids
    + £27.00 P&P
    • 58 watching
    Toyo ML210 metalworking lathe. 240volt. Centre height 2", 8" between centres. Complete with rotating tailstock centre, dead centre, tailstock drill chuck and 3 jaw chuck with keys. Parting tool and 8 ...
  • Warco BV-20 Metal-Working Lathe inc. Accessories

    Warco BV-20 Metal-Working Lathe inc. Accessories

    £495.00
    Buy it now
    or Best Offer
    + £0.00 P&P
    • 23 watching
    Full specification of the Warco BV-20 lathe can be found elsewhere on the internet. The hand wheels operate freely as do the bedways. (The photos were taken in a rather confined space).
  • Myford Metal Milling Lathe With Spares And Accessories

    Myford Metal Milling Lathe With Spares And Accessories

    £122.00
    10 bids
    + £0.00 P&P
    • 180 watching
    Here we have a working lathe that we’ve had for a few years, hardly used. its a little dusty and may need a new belt but still works come with all the bits in the draw
  • Metal Working Lathe Myford

    Metal Working Lathe Myford

    £91.00
    9 bids
    + £0.00 P&P
    • 51 watching
    Possibly a Myford lathe? A old metal working lathe, approx 60cm between centres. Maximum diameter of 8" 115CM wide. No stand so would need to be mounted somehow or on a bench. Wires hav...
  • Alpine TD-4A metal lathe 240V

    Alpine TD-4A metal lathe 240V

    £280.55
    9 bids
    + £0.00 P&P
    • 247 watching
    It runs off 240volts. It sits on a wooden base with wheels.
  • metal lathe tools

    metal lathe tools

    £16.00
    10 bids
    + £3.45 P&P
    For auction various metal lathe cutting tools . If you have any questions or want to come look at them please get in touch . Buyer can also collect
  • small metal working lathe

    small metal working lathe

    £41.00
    14 bids
    + £0.00 P&P
    • 29 watching
    small metal working lathe,all adjustments run smooth,in need of attention and  new 3 jaw chuck. 10 inch between centres,it does run and it has a few spare cutters,it has a quarter house power motor.do...
  • Myford Lathe Ml 5 metal turning

    Myford Lathe Ml 5 metal turning

    £83.00
    6 bids
    + £3.45 P&P
    • 78 watching
  • Lathe. Town woodhouse and mitchell colchester harrison metal milling dsg myford

    Lathe. Town woodhouse and mitchell colchester harrison metal milling dsg myford

    £750.00
    Buy it now
    £500.00
    0 bids
    + £0.00 P&P
    • 12 watching
    This lathe has a big capacity for its physical size, at about 2.2m lon and 80cm deep. It weighs a bit under a ton, so is quite easy to move. These lathes really are lovely to use and you can feel the ...
  • Vintage Metal lathe

    Vintage Metal lathe

    £200.00
    Buy it now
    £25.40
    1 bid
    + £0.00 P&P
    • 52 watching
    Hi for sale this small vintage cast iron lathe the make is RELMAC Cheltenham works, dont know a lot about it, it comes with the( motor single phase it works) and there is a pully gearbox as you see on...
  • 1930s Engineering metal lathe with Pratt 4 jaw chuck. Solan & Chace

    1930s Engineering metal lathe with Pratt 4 jaw chuck. Solan & Chace

    £50.00
    1 bid
    + £40.48 P&P
    • 40 watching
    Solan & Chace lathe believed to be from the 1930’s. Bought from a local museum, stripped, cleaned, painted, re-oiled and reassembled. The chuck is a Pratt 4” 4 jaw and is in good condition. Length - 3...
  • winfield metal working lathe

    winfield metal working lathe

    £450.00
    Buy it now
    or Best Offer
    + £0.00 P&P
    • 11 watching
  • 55449 Mini Metal Lathe 300 Metalworking Turning Lathe Bench Top Milling

    55449 Mini Metal Lathe 300 Metalworking Turning Lathe Bench Top Milling

    £387.98
    Buy it now
    Free P&P
    • 41 watching
    • |
    • 1 sold
    The Lathe 300 ideal for machining round and regularly shaped 3, 6 or 12-sided workpieces. 1 x Mini Lathe 300. the machine can also tap threads without any problem. -Automatic feed. - Toothed wheels fo...
  • Smart & Brown lathe ,metal lathe + 22 collets

    Smart & Brown lathe ,metal lathe + 22 collets

    £380.00
    Buy it now
    or Best Offer
    + £0.00 P&P
    • 19 watching
    Cash on collection.
  • Metal Lathe SC4

    Metal Lathe SC4

    £999.99
    Buy it now
    or Best Offer
    + £0.00 P&P
    • 18 watching
    I have used it for making / modifying RC helicopters parts.
  • Percision lathe watch metal lathe

    Percision lathe watch metal lathe

    £78.00
    10 bids
    + £7.00 P&P
    • 23 watching
    Watch makers lathe parts
  • 1905 Drummond Round Bed Lathe Model Makers Small Metal Not Myford Ml7 Colchester

    1905 Drummond Round Bed Lathe Model Makers Small Metal Not Myford Ml7 Colchester

    £250.00
    0 bids
    + £0.00 P&P
    • 26 watching
    Iv decided to sell my old round bed lathe Is in very good working order and in regular use There’s minimal wear and cuts very accurately there is only the small 3 jaw chuck included and some turning t...
  • High Quality Motorized Mini Metal Working Lathe Machine DIY Tool for Hobby

    High Quality Motorized Mini Metal Working Lathe Machine DIY Tool for Hobby

    £126.99
    Buy it now
    or Best Offer
    Free P&P
    • 961 watching
    • |
    • 169 sold
    Garten & Terrasse. Slider Travel: 140mm. 1 x Center positioning ruler(No.3). Perfect for DIY, hobby, student model making, small parts & crafts processing. All the mini lathes are of general precision...
  • 60W 12000 r/min High Quality Motorized Mini Metal Working Lathe Machine DIY Tool

    60W 12000 r/min High Quality Motorized Mini Metal Working Lathe Machine DIY Tool

    £179.99
    Buy it now
    or Best Offer
    Free P&P
    • 75 watching
    • |
    • 12 sold
    Maximum motor power is 144W by using more powerful motor. 2 x Chuck Adjusting Lever Φ 3 45. 1 x Φ 2 Lever. 1 x Φ 2.5 Lever. 1 x UK Adapter. Motor Driven---Spindle speed : 12,000rpm/min(optional choice...
  • Working Drummond Round Bed Metal Lathe

    Working Drummond Round Bed Metal Lathe

    £450.00
    Buy it now
    or Best Offer
    + £0.00 P&P
    • 12 watching
    Here is a nice clean Working Drummond lathe.
  • metal lathe milling

    metal lathe milling

    £1,000.00
    0 bids
    + £0.00 P&P
    Any questions please ask we can deliver with hiab wagon for a extra cost Working space is 50” Chuck diameter is 29”
  • Metal Lathe Steady

    Metal Lathe Steady

    £30.00
    0 bids
    + £0.00 P&P
    Any questions please msg 07757924158
  • Metal Lathe Cross Feed Screw with dial

    Metal Lathe Cross Feed Screw with dial

    £20.00
    0 bids
    + £6.50 P&P