Does the job it was designed for very well. I had to cut some steel seat hinge points, mudguard brackets and loom tabs off a motorcycle frame and used one of these discs, the hinge points and mudguard brackets were quite thick and the disc made the job a lot easier, small tip when close to the point of breaking through if you are cutting thicker material slow the speed down as the disc can grab and get damaged.
Verified purchase: Yes | Condition: New
Dremel are about the best metal cutting wheel discs for prolonged use and do the job well UNLIKE cheaper inferior quality ones which are ok for light work but don't last as long. The speedclic system is very effective.
Verified purchase: Yes | Condition: New
Dremel tools & accessories have an excellent reputation amongst hobbyists (and professionals also) and these cutting discs maintain this reputation. Easy to mount on the spindle via the "Speedclic" system and very efficient in cutting metal - in my case cut clasp nails securing skirtings. The wheels are also long lasting. One word of warning - do NOT pick up the piece of metal just cut off, as you'll be rudely acquainted with the considerable heat generated in the cutting process. DAMHIK this.
Verified purchase: Yes | Condition: New
This is the only tool that will cut 0.5mm brass into strips 2mm wide without curling. Of course you will need a Dremel rotary craft tool, or other maker's equivalent, to run it on. Although the accessories are individually expensive, those, like this one, that do unique jobs, are priceless. The engineering quality throughout the range is flawless.
Verified purchase: Yes | Condition: New
A very handy addition to my toolbox. Recently had to remove old rusty crosshead screws which wouldn't budge with a screwdriver. Used the discs to cut slots and had no problem getting them out with a flat point. Recommended.
Verified purchase: Yes | Condition: New
Good quality cutting disk, excellent for cutting pipe and other thing that can be difficult with a hacksaw. I have used it on brass, copper and 2mm mild steel, works just fine on all.
Verified purchase: Yes | Condition: Pre-owned
New to Dremels click system, th3se easily and securely lock in place. Cut well and lasting nicely. So far cannot fault dremel drills or tools, I'd reccommend these.
Verified purchase: Yes | Condition: New
These are super cutting discs provided you have EZ-SpeedClic Mandrel and they d cut metal I would recommend them if you need to cut ay kid of metal
Verified purchase: Yes | Condition: New
I used these for working on my classic car body work. They don't last more than a couple of cuts but I find the Dremel far easier to control than a bigger angle grinder.
Verified purchase: Yes | Condition: New
These are great, I use them for my car and bike modifications. Clean cuts and fast disc change
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Rotary Tools
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Rotary Tools
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
