PCB is a weak point apparently, this fixed it instantly. careful to connect correctly, one wire at a time and don't forget the spark lead. Amazing value compared to a new board, and at this price worth stocking a spare. Says reconditioned but looked brand new to me
Verified purchase: Yes | Condition: Pre-owned
Why would you spend £180 - £220 for another Potterton OEM PCB with dry solder joints and electrolytic capacitors that are under-spec and fail? That's right - you wouldn't if you could buy one with the same functional spec and good quality construction for £56. I fitted it to a Potterton 100E (not in the list, but they also have 407677 boards) and it's pretty much plug-n-play. Turn off the power, take pictures on your phone of where the PCB wires go, gently prise the board off of the PCB support posts and disconnect the wires, refit in the reverse order. One comment - the two white wires to the thermostat could be marked so you know which way around they go (but perhaps it doesn't matter?). The old black plastic cover on the 407677 didn't fit the new board, but it doesn't really matter if it's installed without one (you won't find covers on the PCB's in your TV or laptop). After refitting the boiler fired up straight away with a nice blue flame (and seems to be burning better than before - but that could be wishful thinking?), At £56 it's almost worth having one as a spare? Read full review
Verified purchase: Yes | Condition: New
Bought this as a spare. These have been known to a weakness in an otherwise reliable boiler. So it has not yet been fitted, however it is identical to the original and appears brand new. I rate it as good value at this price even though I hope not to have to fit it
Verified purchase: Yes | Condition: Pre-owned
Delivered promptly and was easy to install. However this replacement differed from the original Baxi PCB. There are 2 white cables which connect to the Boiler thermostat and it wasn't clear which way round they should be plugged in. I did query this with the supplier, but did not get a response so I have reduced my rating by one star. I guessed that as they were both white it did not matter in which way they were connected and I was either correct or lucky as this PCB worked fine.
Verified purchase: Yes | Condition: New
Had a Potterton 30e boiler playing up and not igniting when it should . Was worrying as it was just gas coming out . Upon research people said to try the pcb . Bought one and fitted it (mostly it’s plug and play with the exception of a few wires needing to be snipped and joined) so far it’s been working great! That combined with a hive system (so I can monitor it if it came on when I’m away ) it’s been spot on so far . The cover from the original doesn’t fit the new circuit board but as things like TVs don’t have covers this doesn’t need one either .
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Water Heater Parts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Water Heater Parts