Skip to main content

With the art of woodturning, a quality lathe is the foundation of beautiful and consistent work. A cast iron headstock, tailstock, and bed make for a sturdy and reliable foundation as well as a wiser investment than flimsy sheet metal.

Professional or pastime woodturning benefit from a lathe with a variable speed system, ideally ranging from 500 to 2000 rpm. Optimal control and quality construction lets you create finely detailed work in a range of natural hardwoods.

  • Boxford AUD Mark III Metal Turning Lathe - VGC

    Boxford AUD Mark III Metal Turning Lathe - VGC

    £770.00
    10 bids
    • 180 watching
    Boxford AUD Mark III Metal Turning Lathe in very good condition. Serial number AUD - III - 37 555. Please make contact within three days to arrange a convenient time. The Chesham area is in the Chilte...
  • Old Metal Turning Lathe - Ideal

    Old Metal Turning Lathe - Ideal

    £100.00
    1 bid
    + £0.00 P&P
    • 52 watching
    Very old metal turning lathe complete with work bench. I am selling this for my dad who assures me that it is still in working order, although would benefit from a rewire.
  • Metal working lathe, extras, not myford VGC, Seperate hoover motor loads of uses

    Metal working lathe, extras, not myford VGC, Seperate hoover motor loads of uses

    £120.00
    0 bids
    + £0.00 P&P
    • 21 watching
    The hoover motor has 3 speeds to the lathe and 2 speeds on the motor, this is fixed seperate from the lathe to your bench, via bolts, but something more permanent would be better made up if the lathe ...
  • Raglan Little John 5

    Raglan Little John 5" Centre Lathe Metal working Lathe

    £330.00
    36 bids
    • 140 watching
    Raglan Little John 5" centre lathe with stand cabinet  The only issue with this lathe is , the lever that engages the auto feed has snapped off. There is a new lever with the lathe but I've not got ro...
  • clarke cl 500m metal lathe with mill drill

    clarke cl 500m metal lathe with mill drill

    £700.00
    0 bids
    + £0.00 P&P
    • 22 watching
    This is a clarke cl500m metal lathe with mill drill there is a set of internal jaws threading cogs it is a 6 speed lathe and 12 speed mill drill in full working order can be seen working it is very he...
  • WOOD TURNING LATHE

    WOOD TURNING LATHE

    £71.00
    12 bids
    + £25.00 P&P
    • 16 watching
    Nu-tool wood turning lathe in working condition 240 volt motor.
  • Wood turning lathe

    Wood turning lathe

    £171.66
    33 bids
    • 35 watching
    This is a Record wood turning lathe which has had very little use .
  • Record Power CL1 Woodturning Lathe

    Record Power CL1 Woodturning Lathe

    £280.00
    Buy it now
    or Best Offer
    Record Power CL1 Woodturning lathe, a very sturdy and well built lathe, with bowl attachment,instruction manual (instructions on how to assemble, not on how to turn wood)
  • Woodturning Lathe

    Woodturning Lathe

    £285.00
    Buy it now
    or Best Offer
    Charnwood W821 Midi Wood turning Lathe with tools,chisels, pen making mandrel and extras. Wooden bench / stand included No longer required. Distance between centres. Specification.
  • Axminster Hobby Series AWSL Woodturning Lathe

    Axminster Hobby Series AWSL Woodturning Lathe

    £203.46
    Buy it now
    Free P&P
    • 52 watching
    • |
    • 14 sold
    A small hobby lathe with five spindle speeds, 240mm diameter turning capacity and 440mm between centres. Well suited to the newcomer to turning who has a limited budget available and only space enough...
  • Colchester Student Mk2 Gap Bed Lathe/ Single phase

    Colchester Student Mk2 Gap Bed Lathe/ Single phase

    £1,286.00
    8 bids
    • 114 watching
    This lathe was purchased back in 1983 by my late father and has had very light use (model steam engines). The motor has been converted to single phase unit so runs fine from a standard 13amp domestic ...
  • COLCHESTER  LATHE FIXED STEADY MASTIFF /  MASCOT

    COLCHESTER LATHE FIXED STEADY MASTIFF / MASCOT

    £150.00
    1 bid
    This steady fits the Colchester Mastiff lathe as is, but would also fit the Mascot lathe with the 2" spacer removed from the bottom,this was confirmed by the spares department at Colchester lathes,the...
  • Colchester Student Mk1 bronze bushes

    Colchester Student Mk1 bronze bushes

    £5.00
    1 bid
    + £5.00 P&P
    • 11 watching
    Bronze bushes from a Colchester Student Mk1 lathe. May not be a full set. If you are refurbishing one of these lathes these could be very useful.
  • COLCHESTER TRIUMPH  7 1/2

    COLCHESTER TRIUMPH 7 1/2" CENTRE LATHE 3 PHASE 440 VOLT .

    £975.00
    0 bids
    • 15 watching
    Used full working order Colchester triumph 7 1/2" gap centre lathe 3 phase 440 volt with 9" and 10" 3 jaws chuck ,12" 4 jaws chuck ,14" and 21" face plates ,2 set hard inner and outer jaws ,2 sets inn...
  • Colchester BANTAM Mk1 Lathe Manual

    Colchester BANTAM Mk1 Lathe Manual

    £6.55
    Buy it now
    + £1.50 P&P
    This is aCOPYof the Colchester Bantam. 51/2" (140mm) Lathe (MC300) Instruction Parts Manual. Instruction Parts Manual, The manual includes 53 pages. Including pictorial parts lists and full specificat...

Recommended buying guides

See all guides
See all guides