Here at Innov8, we supply you with a fitting kit which will help you to attach your number plate to your vehicle. This consists of 6 Double Sided Foam Pads.
We recommend that you firstly clean the rear of the number plate as well as the surface you're attaching the plate to with a de-greasing chemical.
Secondly, make sure that both surfaces are dry (avoid carrying out the procedure in the rain!)
Ensure that the areas where you will attach the sticky foam pads to will have the maximum contact with both surfaces (eg. avoid grooves and ridges in the bumpers!)
It's a good idea to get an idea of where the plate will look central and straight on the car before applying the sticky foam pads to the plate. You can mark the area where the plates will go using masking tape or blue-tack.
Peel away the Foam Pads from the supplied sheet, and attach 3 Foam Pads to each Number Plate. Peel away the backing from the foam pads and apply the plate to the vehicle.
**If the surface you're attaching the plates to (on the car) is a rough surface, you may need to use screws as a more permanent solution.**
If you have any questions, please call us on 07843 907 903 or 07966 653056 !