How to Apply Resiblock Sealers
Applying Resiblock sealers – we are asked about this quite often – so here is the quick run-down on the block paving tools and paving treatments you need to know about. Are you laying patio slabs or maybe natural stone wall and floor tiles? Learn how to seal block paving below whether you are laying Marshall block paving or Bradstone paving with our paving sealing solutions.
Applying Resiblock sealers to a driveway, path or patio is actually very straightforward and so for the DIY person, here is a simple process:
Clean paving thoroughly with a pressure washer, remove all traces of weeds, algae stains, lichen and any other old stain
Ensure the entire area is completely dry, clean and free of debris before sealing
Only refill the joints with kiln dried sand on the same day as application
Check that no sand remains on the surface of the paving
Before commencing sealing ensure that you have the correct application tools and sufficient RESIBLOCK sealer to complete the task (see below)
Use a brush, roller or squeegee and apply the paving sealer as per the product’s own application guidelines.