How to Make Carp Fishing Leads

Like if this guide is helpful

How to Make Carp Fishing Leads

All of the fishermen who are specialised in carp fishing can tell you one thing: the choice of the appropriate knot and lead is everything. The carp fish is very cunning, and it will use the slightest opportunity to escape from your hook. It is also not easy to get a carp to take the bait at first. If anything seems suspicious, it will simply ignore the bait. To catch this fish you have to be aware of the thickness of the thread, the size of the hook, and the type of the bait. But one of the most important tasks is to make an adequate knot and to use the appropriate lead.

It is very important to know how much distance between the hook and the lead you can apply in certain environment, and which type of the lead to use. Although this might sound like an exaggeration, rest assured that this is one of the most crucial things to be taken care of, and this article will provide all of the necessary explanations how to pick the right type and the right weight of the lead when fishing carp. You can investigate the various types of carp fishing leads available on eBay.

The History of Carp Fishing Leads

Carp fish are freshwater fish with many different species. They are some of the most adaptable fish in the world. The introduction of the carp came from England and Wales, and began as early as the 1300s. The carp were imported from the mainland of Europe and raised in ponds. When the fish commission was created in 1870, the carp was stocked as a food fish. Over time, the fish gradually fell out of favour, and was ignored by fishermen for decades. Carp were even referred to as garbage fish because they eat most of what they find at the bottom of the body of water in which they reside. Although carp can make a delectable meal, because of their bottom-dwelling reputation they were once thought to be inedible.

Richard Stuart Walker became very well known for the great advances he made in developing carp fishing methods in the 1950s. Walker was born at 32 Fishponds Road in Hitchin, Hertfordshire in 1918. At the age of four he was taken out regularly to go fishing with his father. Walker wanted a more relaxing way to enjoy his pastime of fishing, so he also devised an alarm that would beep when a fish was tugging on his fishing line. Walker also wrote many books on fishing, and he even helped develop the carbon-fibre fishing rod. It wasn't until the 20th century when Richard Walker caught a 44-lb carp that people really began to pay more attention to the carp fish again.

The Importance of Fishing Leads

From the very beginning of tackle fishing, leads were necessary. Since bamboo and wooden rods have been replaced with modern fishing rods made of plastic, carbon fibres, or fibreglass, the lead has become even more important. All modern fishing rods have a specific throwing action mark. This mark symbols the ideal weight of the lead used while throwing the bait. Being overweight can cause you to risk damaging the rod. Being underweight means that you won't be able to get to the maximum length of the throw.

Leads were developed in various shapes to fit the specific conditions of certain water resorts. Namely, the cylindrical leads are better for still waters as they blend with the lake bed easier and more efficiently. On the other hand, the rivers and the streams have a tendency to roll the lead if it is of that shape. This eventually led to the development of different shapes and types.

Rod Fishing for Carp

If you are just starting to fish for carp, rod fishing is a good method of choice. In order to catch carp you will need to get your line where the carp are. Carp are bottom dwellers, and stay in the bottom of their water source. If you plan to fish in the water, you will need to purchase sinkers, also known as leads, from eBay. Leads come in various sizes, and fishers can usually purchase a multi-pack of split-shot sinkers. Smaller sized sinkers are recommended so that the fish don't see the sinker and try to go for the sinker instead of the bait.

Carp usually like dark, murky waters. Leave about a foot of line from your sinker and swivel to your hook. The bait will rise off the ground in the water and look appealing to the carp. The line needs to be strong and sturdy so that it can withstand tugging from the carp. A good 8-15 lb fishing line with a barrel swivel will work well. A swivel is needed because while carp are generally slow movers during their trips around the bottom of the water, once they are caught they will put up a good fight. Carp are considered to be knowledgeable fish, and have even been known to spit out the bait that they find unsuitable.

Decide on Your Bait

Before you make your carp fishing leads it is important to find the right type of bait. Carp fish eat waste, and a delicious treat for them is corn. Carp fishers can stock up on inexpensive cans of corn during the winter months from online marketplaces like eBay. Fishers can bait carp with corn by emptying a can of corn into the lake each day. This trains the carp to come to the same area each day. Some carp will even arrive at the same time or just stay there waiting for you to return. Some fishers use dough balls to lure carp fish to the same area of the lake each day. Keep in mind that carp are bottom feeders and they will eat just about anything. If you plan to make dough balls for bottom dwelling fish that eat waste, then don't bother buying expensive ingredients.

The leads are a crucial part of your fishing equipment. Beginners do well to buy branded leads at first. Be sure not to buy too large stock since soon enough it will be clear that this expense can be significantly lowered.

How to Make Carp Fishing Leads on Your Own

Moulds are easy to make, and usually there are two basic ways and two basic materials from which they are being made. They can come from steel and from a special kind of ceramic. You can make a print in the raw clay and then to take that clay to be baked. The main flaw of these moulds is that they are quite fragile and easy to break, so their life expectancy is much lower than with the iron ones. Additionally, the ceramic moulds give somewhat imperfect surfaces unless they are glazed. The other option lasts for a lifetime and it allows a lot of freedom in picking the shape. For this method you would have to make a computer model of the mould. Making the sketch of a mould takes no more than 10 minutes to a skilful engineer or architect.

Once the sketch is designed, you would need to make a real mould. At this point specialized machines would be needed. When all of this is done, it is the time to complete the process. Once when the mould is set and fixed, and the lead is molten, then it should be poured in. This should be done quickly and with precision. Caution is needed because the molten lead can burn. One important thing to remember is that these moulds have to be cleaned. Once they are open and the finished piece is produced, inspect the surfaces of the mould that are leaning and remove any particles from there. One single grain of sand can ruin the final product.


Fishing for carp can be very enjoyable. Before you start making your carp fishing leads, make sure you have purchased all of the necessary equipment from eBay.

Have something to share? Create your own guide... Write a guide
Explore more guides