Installing Hard Drives and Ram Simm

Like if this guide is helpful

When you install your new Ram Simms always turn off your computer from the mains and use a earth wrist strap clipped on to the computer case then take out the old Simm and place the new one in, when are finished unclip the strap and close up the computer.

If don't use a wrist strap you cloud short out the Ram Simm by static shock, that is why it is best to use a earth strap clipped on the computer case.

When installing a new Hard Drive do the same as the Ram Simms.

Whatever you do, never touch the mother board without an earth wrist strap as the static shock will mess up your mother board or it will not work at all, that's why the earth strap is very important piece of kit to have.

 

Have something to share? Create your own guide... Write a guide
Explore more guides