Methods of Converting RGB Signals

eBay
By Published by
. Views . Comments
Methods of Converting RGB Signals

Converting red, blue, green (RGB) signals into images is a very important task that involves transferring one colour of an image into another. This often entails using a converter RGB signal converter to take out colours that are not wanted and have these colours replaced with ones that are more desirable. RGB signal converters can be located at home improvement stores, electronic stores, and on eBay.

There are various methods used to complete this process, and each one requires the use of one of these types of signal converters. There are seven methods of converting these signals that are standardly used today. Understanding what converting RGB signals entail as well as knowing how these signals are converted help a person know which type of signal processor is best for what they need. In addition, knowing which ones are best and why can also make selecting the right converter much easier.

How RGB Signal Conversion Works

Knowing how RGB signal conversion works is often useful information to be aware of. Understanding the process and how it relates to the equipment helps buyer figure out what type of signal converter is the best choice for them.

Video Signal Formats

One of the first things to note is that there are a variety of different video signal formats. Each one of these different formats varies from each other in a way that requires specific signal converters for each task that requires this operation.

There are two different ways in which origination of a video signal can begin. The first one is by electronic means, which typically starts with a graphics card. The second way is by optical methods, which often is originated by way of a scanner or a camera. A video signal is made up of three primary light colours that consist of red, green, and blue in varying degrees of intensity. There are also two other signals that are used to judging timing. These latter two signals determine when the vertical sync picture and horizontal sync pictures frames need to begin. At the final resting place, a video signal must be converted back into the original image. Displayed on televisions via their Cathode Ray Tubes (CRT), the CRT sends out a beam of light whenever electrons come in contact with the phosphor coated tube. The methods used to convert these signals largely depend on how good the outcome of a displayed image is.

Format Types and Cable Requirements

The table shown below lists the seven video signal formats that are used in video signal conversion as well as how many cables are required for the converter. The table also lists information that defines each type of format.

Type of Conversion Method

Cable Quantity

Notable Characteristics

RGBHV

5

Relayed from a personal computer to a VGA connector; considered to be best as each signal is transferred independently through each cable

RGBS (RGB)

4

Composite signal containing both H and V pulses; colour signals are separate; sync S type of signal;

RGsB

3

Also known as Sync on Green or SoG; This works the same way that RGBS works, but it does not include a separate sync, sync signal is instead mixed with the green signal

Component Video

3

Composite video signal that is black and white; also contains composite sync and Y brightness, Cb in addition to Cr, which removes red colour and leaves only green, commonly in DVD players in the U.K.

S-Video

2

Composite video signal that is black and white; Y C and composite sync is used; includes all colours

Composite Video

1

includes all colour, timing, and signal information making low quality converter, signal is composite video

RF

1

High frequency composite video, usually includes audio, sends multiple signals on cable which can create interference if carrier frequency is off. Often used for satellite and cable TV, and other mass production methods

Not all RGB conversion video output units are truly only RGB converters. It is helpful to see if the converter is either RGB in addition to composite video, or they can also RGB in addition to composite sync. This is not normally an issue that most television sets have a problem with converting, but it is also helpful to be aware that not all computers may react the same way if they are expecting output of the latter signal.

Determining the Correct Signal to Use

The type of signal that a person is able to use varies depending on a number of different things. One of the four things that should be considered when determining the correct signal to use is what type of outputs is already on the video source. The second is what type of outputs are already on the source that is meant for viewing. The last two factors that need to be taken into considered are if the type of cable to be used is compatible and if is there a switch required before it reaches its final resting spot. It is not hard to figure this information out for most television units as they usually only have one that uses RBB and can also have multiple ones that are capable of S-Video formats.

Signal Conversion

Signal conversion is possible with the help of RGB converters. These converters are able to change this signal type into S-Video formats. These converted signals are useful as they can be picked up by various sources with RGB 2 S-Video converters and CAT5 cables that transfer the signal to AVS modules.

Choosing the Right Converter Method

When deciding between the different types of RGB signal converters that are available, it is helpful to consider the source the signal is going to be transferred to. DVD players most often have the largest range of format outputs, but other things, such as computers, can have issues with some signal formats. Although the choice is up to the user, the best overall choice is to choose the one that offers the best quality for the device that needs it.

It is important to note that although signal formats can be changed to a higher format, most often these changes do not make much of a difference except that it can negatively affect the picture quality. Since the signal has already gone through a down conversion, trying to upgrade conversion could result in increased pixilation or other image problems. Many new television units already come equipped with built-in converters directly from the manufacturer that have built to the highest technological standards available.

S-Video is the format that is most often supported for household use. Changing S-Video format is switched often with AV amplifiers, but higher formats are extremely hard to change using this method as they are not commonly supported.

How to Buy RGB Converters on eBay

There are various types of RGB signal converters that can be found on eBay, and each varies by format. If you want to find a RGB signal converter that comes in a specific format, all you have to do is to simply type the kind that you are looking for into the search query box that is available on the eBay homepage and at the top of all the other pages for your convenience. Within seconds multiple results for items should appear, allowing you to choose the one that you are interested in. For example, if you wanted to have a wide variety of choices in finding a signal converter, simply enter the keywords "signal converter", then click on the search button. At this point you should have a multiple items that are displayed. If you want to narrow down your search results, try refining your search query and add or subtract keywords in various patterns, one at a time. To make things even easier, there is also an advanced search feature option that is available, and it allows you to narrow the search results by filters, such as category, price, seller, location, and more.

Conclusion

Many times it is necessary to convert RGB signals into other formats for a variety of reasons. It also does not help that a lot of the terms used for various features or components have very technical and complicated sounding names, often due to abbreviations or other descriptive factors. That is why it is helpful to understand something about what types of methods are used to convert RGB signals.

Also understanding the different formats used in conversion methods makes it all seem a little less like a foreign language when people can view their equipment and components and recognise features that they may not have previously known or understood. Determining which signal to use is also not hard when the four elements involved in the decision are taken into account, and these factors are input method, output method, type of cable involved, and whether a switch is involved. Being able to distinguish between the various methods used for converting RGB signal helps to make anyone feel like a professional when they understand what they are buying.

 
Write a guide
Choose a template

Additional site navigation