Motorola K1 KRZR disassembly Guide Part Two

Views 2 Likes Comments Comment
Like if this guide is helpful

Motorola K1 KRZR disassembly Guide Part Two

Now unclip the ribbon at the other end, shown below

Now separate the two screens by running your fingernail along the edge where metal clips hold them together

Now unclip the front cover. It is held on by clips around the edge. Just run your fingernail around the edge to remove


Your screen should now be in two parts (the large inner screen and the small outer screen) like the picture below. You can now replace the screens

Reverse the whole procedure for reassembly

Have something to share, create your own guide... Write a guide
Explore more guides