Picture 1 of 6
Picture 1 of 6
Draper 52329 Gearbox Clutch Mate Plate Alignment Tool
Price:
£15.00
Returns:
Condition:
Fits Most Vehicles Up To 5 Tons.
 | Shop by category |
{"delay":300}
|
Good price and looks like good quality for a occasional use DIY tool. It's not compatible with all clutches though. I tried to use it on an Alfa Romeo 3.0 V6 clutch and it just doesn't work as none of the three fittings supplied are big enough.
Verified purchase: Yes | Condition: New
I bought this in hopes of making life easier when changing the clutch on my Celica 190. Prior to using this tool I assembled it together with the collet piece that would fit through my clutch disc spline. First of all the threads on the brass nut were not tapped correctly and were too stiff for the tapered end to grab and start splaying out the collet. So straight away I had to run a tap down the nut in order to get it moving freely on the threads. After this I start work on my car and eventually get to the clutch. I attempted to use this tool but could not find a way of it reliably holding the clutch disc centrally in place while I torqued the bolts up. There was still plenty of movement on the clutch disc as I was torquing the pressure plate down. After one attempt at keeping everything straight with the tool the clutch disc was clearly not aligned straight. In the end I simply aligned the clutch by eye alone as I didn't want to risk trusting the alignment tool given how much of a pain the gearbox can be to get back on. After aligning it by eye there was no issue in getting the Gearbox back on. The shaft went in nicely and the bell-housing bolted back on. So in my experience so far this tool is poorly made as well as bad at its intended purpose and simple eyesight alignment prevailed in my case. If I were to do a clutch in future I would strongly consider getting the specific alignment tool for the car or if you are feeling confident do it by eye.Read full review
Verified purchase: Yes | Condition: New
Bought this for the first clutch change I have ever done and had not problem using this. Straightforward to use, reasonably sturdy, does the job.
Verified purchase: Yes | Condition: New
Great value and product works well to line up the friction disc in tricker clutch changes such as vauxhall astra without removing subframe completely
Verified purchase: Yes | Condition: New
Very good value and quality
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Clutch Repair
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Clutch Repair
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
