#7 Best-selling product in Vehicle Rust Prevention
 | Shop by category |
{"delay":300}
|
The product is very good in dispelling moisture and protecting metal parts from further rust damage. The down side is the difficulty in getting the spray to operate consistently as it will block up in the applicator unless it is very thinned down by white spirit and kept quite warm. Brush application is possible but even more messy. Prepare to get dirty doing this job. Overall I would recommend getting a garage to do this using their air compressor gun- you just supply the materials
Verified purchase: Yes | Condition: New
Been using waxoyl for over 25 years and if applied correctly is an incredible product. I always heat it up until it is 100% liquid before spraying with a schutz gun. Never let me down and with a 1m tube you can also inject in to every vehicle cavity for ultimate protection. I usually re-coat after 4-5 years and can definitely say it works very well.
Verified purchase: Yes | Condition: New
I've been using waxoyl for as long as I can remember and can only describe it as brilliant stuff. It isn't meant to sprayed under arches etc because it will eventually get washed off by weather or pressure washing. I spray it into box sections doors and sills etc. I've seen a lot of comments about difficulty in spraying however with the right gun its easy although you do have to heat it to a reasonable temperature, try on a hot day it makes it so much easier. I have a underbody gun from machine mart which the smaller can will screw on too. I then heat that and refill from the larger can. I have a VW T4 van and its been waxoyled to death and looks like new. I removed all the door and sill plugs and took out the arch liners inside the vehicle and sprayed it into every nook and cranny. Just wear old clothes because it can be a bit messy.Read full review
Verified purchase: Yes | Condition: New
Used it for years! Thin with white spirit, warm it up, use on a warm day, protect areas and yourself, spray & forget. Great for chassis box sections, door and boot lid internals. Use on a new car to put years on the bodywork.
Verified purchase: Yes | Condition: New
I have been using Waxoyl for years and it is effective at holding back rust. Particularly useful for spraying inside chassis box sections, and other inaccessible places like the bottoms of doors. It is not so good in wheel arches unless you do it regularly as it does eventually get washed off. But, it is difficult to spray. This time I used a compressor with a paraffin gun. Standing the can in a bowl of very hot water (as recommended) thins it down nicely but it still has lumps in it which vigorous shaking (as recommended) does NOT break up. Adding some white spirit thins it further, which is not really needed, but still does not dissolve the lumps, Using an old blender would be ideal! I think next time I will heat it and then pour it through a sieve to make spraying it quicker and easier but I might end up with a lot of lumps left over which seems a waste.Read full review
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Rust Prevention
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Rust Prevention
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
