 |
This is a good quality fan which is more powerful than many of its competitors. It’s fairly easy to install requiring only 2 wires, live and neutral, you are advised to include a fused switch in the feed circuit with a 3 amp fuse. I have now installed 2 of these fans, one for each bathroom, both are working fine and are fairly quiet in themselves but you do get the sound of air rushing out through the ceiling vent. I also mounted mine on rubber buffers to reduce any noise. The only problem I found was with the supplied securing screws, they are too big for the holes and I had to drill out to a slightly larger size.
Verified purchase: Yes | Condition: New
Bought this fan in combination with a separate timer/humidistat to replace the very noisy low price inline fan that i had. This one is about three times the size, but when mounted correctly, i found it to be much much quieter (like the sound you get in a hotel bathroom), and it pulls loads of air out. Build quality is excellent, and it it straight-forward to attach hoses to, unlike the smaller ones. It does cost more than the DIY shop specials, but is so much better that the cost difference is a non-issue.
Verified purchase: Yes | Condition: New
Got this easily fitted to a bathroom that was always damp after the shower had been on. Straight swap of old extractor to new. Now the bathroom rarely steams up and mirrors and windows stay clear. Check to see if you need a condensation trap to go with this when ordering.
Verified purchase: Yes | Condition: New
A well built fan that comes with NO mains lead or plug, You will need to wire in your own mains lead. The fan has 3 speeds that are not switchable when installed, To change the speeds you have to take apart the top fan case to set the jumper to the required speed.
Verified purchase: Yes | Condition: New
This works really well, easy to wire up and just put a plug on. Yes I would recommend this product
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Extractor Fans
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Extractor Fans
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
