 |
First THREE issues with it. FIRST cable tie the black tube to the clear tube. I found this blew off after bleeding the first car obviously the fluid made it easy blown off due to lubrication. Second a very necessary to get it right re tube going onto the bleed nipple with the white collar clamp. I found it impossible to put the collar on after the black pipe was on the nipple. I had to put the white clamp near the end of the black tube then grip tightly and push both on at once. Lastly I found I had to cut a small amount off of the black pipe as with the full length of the black pipe it Kinked in the middle once the system was fully fitted, cutting down flow. Hope these three point help
Verified purchase: Yes | Condition: New
The item is flawed by design, as air is drawn through the bleed nipple threads. So you will never get the air out of the brake fluid.
Verified purchase: Yes | Condition: New
initially I thought it wasn't working but the clutch I was bleeding are notorious for being a pain to get started- perceiver! as soon as the fluid got to the valve it worked like a charm, read the instructions about securing the pipe, and as I tip you might want to pre load the pipe with a tiny bit of fluid to lubricate the valve. Made a pain in the back side job easy and without getting fluid all over the paint work.
Verified purchase: Yes | Condition: New
this is brilliant and worked great first time , if i can use it anyone can, dead easy, never be afraid of bleeding brakes ever again. many thanks.
Verified purchase: Yes | Condition: New
light weight, easy to use, no mess
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Brake Repair
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Brake Repair
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
