Keep Your Shave Smooth With Braun Series 3 Replacement Foils
Braun Series 3 shavers use sensitive, flexible Braun S3 foil heads to give you a close, comfortable shave. To keep your shaver operating as smoothly as possible, you'll need to periodically replace the foil cassette. When it's time to do this, you can find the Braun Series 3 replacement foil heads you need on eBay.
When should you replace the shaver head?
You should replace the shaver head for your Braun Series 3 shaver whenever it starts to produce a rough, uncomfortable shave. How long this takes depends on how frequently you use it. However, the manufacturer recommends a new Braun S3 foil at least every 18 months. You should also get a new Braun shaver Series 3 replacement head whenever the replacement light on your shaver comes on.
Common Braun Series 3 models on eBay
Some common models that use the newer heads include:
- Braun Series 3 300s and 310s.
- Braun Series 3 340s-4 and 380s-4.
- Braun Series 3 ProSkin 3010s, 3040s, and 3080s.
- Braun Series 3 Shave Style 3010BT.
- Braun Series 3 CoolTec CT2s.
Which shavers use the Braun S3 replacement foil?
Braun Series 3 wet and dry replacement heads are compatible with a wide range of shavers. There isn't a specific Braun 3040s foil, Braun Series 3 380s 4 replacement foil, or Braun Series 3 3080s replacement head. Instead, the standard 21B, 32B, or 32S heads fit all newer models You can also use one of these cassettes as a Braun S3 3040s replacement head. Older Series 3 shavers with separate foils and cutter blocks use the 30B or 31S replacement packs. Consult the manufacturer's site or your device instruction manual to determine which specific head your Braun S3 requires.
Model differences in cassette applications
Later releases of the Braun Series 3 have a simple pop-and-release action to allow wet and dry replacement heads to be installed. The only consideration is proper alignment, then a gentle press to snap it into place. Older Braun shavers, however, use a separate foil and cutter block. These need to be released by removing the foil, which then allows the cutter block to be rotated 90 degrees and discarded. A new cutter block has to be rotated into place before the replacement foil can be applied.