Computer Drive Cables & Adapters

Serial ATA / SATA II Hard Drive Data Cable.

Serial ATA / SATA Hard Drive Power Cable. Connectors: 1 x Molex 4 pin - 1 x Sata.

Just plug on the end of sata power connector and it will give you a Molex plug. If you have a SATA 15pin power connector and need a standard Molex plug (as found on most IDE Hard Drives, Cd-Roms and DVD readers and re-writers), then this adapter will work for you.

SATA revision 3 doubles the speed of the current 3GB/s version reaching transfer speeds of 6GBs. Our braided Sata cables are durable and help protect the cable. Right angle for those hard to reach tight spaces.

Right Angled Serial ATA / SATA II Hard Drive Data Cable.

SATA revision 3 doubles the speed of the current 3GB/s version reaching transfer speeds of 6GBs. Right angle for those hard to reach tight spaces. 7 Pin SATA data. SATA 6Gbps. FLAT cable. Locking male connectors.

The cable has one male port for connecting to an existing power cable and three female connectors for adding devices. If you have run out of sata power plugs, this will convert 1 into 3. Product Weight : 60 grams.

Cablestar Limited - Serial ATA SATA 22 Pin Extension Cable SATA 7 Pin 15 Pin Female 45cm. SATA ( Serial ATA ). Parallel - Serial. We do our very best to ensure what you see is what you will receive.

Right angle SATA plug end to a regular straight SATA cable plug end at 90cm in length. SKU : 002741. Product Weight : 30 grams.

One end of the cable connects to back of 2.5" 44 pin harddrive and the other to the motherboard. There is also a power feed for the drive (standard 4pin molex). Connect you notebook/laptop hardrive to your PC via this cable.

Right angled connectors with locking clip for secure connection. Compatible with SATA I and SATA II hard drives and mother boards. will also connect SATA II Hard Drtive to SATA I Motherboard and Vice versa (speed dictated by slowest).

ESATA 7 Pin Male to SATA 7 Pin Male. Connects an external eSATA device to a SATA controller! Ideal for using newer eSATA equipped external drive housings with older SATA controllers. Supports SATA II speeds of up to 3Gbit/sec.

ST2083 NGFF M.2 B M KEY or mSATA SSD to SATA III 3 Adapter card enables using of NGFF M.2 SSD or mSATA SSD as a direct replacement for the 2.5"HDD in the laptop/desktop. Allows user to use NGFF M.2 SATA or mSATA SSD as standard SSD in the Desktop or Laptop.

The cable has one male port for connecting to an existing power cable and three female connectors for adding devices. SATA Power Splitter/Extension. 85cm total length.

Couples 2 IDE 44pin connections together. P-ATA IDE connection as found on Laptop 2.5" Hard drives. EAN : 5055383412518. SKU : 001251.

This is an internal SATA data cable that is 0.45 metres in length. It is for connecting a SATA device such as a SATA hard drive to the motherboard of a PC. One to one connections. Each SATA Hard Drive needs a separate cable.

Male 15pin SATA PSU connector to two 15pin SATA female power connectors. Enables connection of two SATA devices to single SATA connector PSU connector. SATA Power Splitter. Cable length 30 cm. PSU connector 15pin SATA male.

Also included is a 15 pin SATA power cable for powering SATA devices such as a SATA hard drive from a 4 pin molex power cable. It allows the conversion of the 4 pin molex power connector from the PC"s PSU to be attached to the SATA powered device.

Backward compatible For previous versions of USB ports (1.0, 1.1&2.0) & SATA hard disks (1.5Gb/s). Transfer rate of Super-Speed USB 3.0 interface can be up to 5Gb/sec (Max). Supports 2.5" Mass Storage Class Drive.

The USB to SATA Cable Can Allow You To Connect SSD or 2.5″ SATA Hard Disk Drive(HDD) To The Computer, Laptop Directly, You Can Use It To Copy Or Back Up Your Data At Any Time. USB Bus Power Mode, No Need To Add Any Extra Power Or Driver, Plug And Play, Very Easy To Use.

The USB to SATA Cable Can Allow You To Connect SSD or 2.5″ SATA Hard Disk Drive(HDD) To The Computer, Laptop Directly, You Can Use It To Copy Or Back Up Your Data At Any Time. USB Bus Power Mode, No Need To Add Any Extra Power Or Driver, Plug And Play, Very Easy To Use.

The USB to SATA Cable Can Allow You To Connect SSD or 2.5″ SATA Hard Disk Drive(HDD) To The Computer, Laptop Directly, You Can Use It To Copy Or Back Up Your Data At Any Time. USB Bus Power Mode, No Need To Add Any Extra Power Or Driver, Plug And Play, Very Easy To Use.

Features: Transfer rate of Super-Speed USB 3.0 interface can be up to 5Gb/sec (Max) Supports Hot-Swapping and Plug and Play function Compliance with Serial ATA Specification Revision 2.6 Specification: Backward compatible with previous versions of USB ports (1.0, 1.1&2.0) & SATA hard disks (1.5Gb/s) Supports 2.5" Mass Storage Class Drive.

This Cable allows you to power 2 SATA Drives using a Single 4 Pin Molex Cable. The cable is Rohs compliant. 0.13m Long.