Computer Thermal Compounds & Supplies

This thermal grease can be used on the rear side of the heat sink which has no thermal pad. It will improve the heat dissipation of your processor. HY510 grey thermal grease provides better cooling performance with high thermal conductivity graphite.

5pcs/lot STARS-922 Heats plaster CPU GPU LED Thermal Silicone Grease Compound Glue Cooling Paste Heat excellent adhesiveUse for : North-south bridge video card heat dissipation part Used to paste heat s with IC chips, and be cooling body with good thermal effectSpecifications: Packaging size:about 98 x 56 mm Net weight : 5g Color: silver(Package)Packing Content: 5 x CPU GPU Thermal Silicone Grease Compound GlueNote: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is /- 1-3cm. MPN Does not apply Brand Unbranded UPC 191466067857 EAN 191466067857 ISBN 191466067857 UPC 191466067857 EAN 191466067857 ISBN 191466067857.

This thermal grease can be used on the rear side of the heatsink which has no thermal pad. Thermal conductivity: 1.829 W/m-k.

Improves thermal conductivity between transistors and heatsinks etc.

This thermal grease can be used on the rear side of the heat sink which has no thermal pad. It will improve the heat dissipation of your processor. HY510 grey thermal grease provides better cooling performance with high thermal conductivity graphite.

This thermal grease can be used on the rear side of the heat sink which has no thermal pad. It will improve the heat dissipation of your processor. HY510 grey thermal grease provides better cooling performance with high thermal conductivity graphite.

1 x Silicone Heatsink Plaster. Despite it being an adhesive, removal is as easy as a thermal pad, without leaving residue behind. The color may have different as the difference display,pls understand.

The connection thus created is super strong and has excellent heat transfer characteristic. Dielectric strength (KV/mm) 20. Dielectric Constant 3.0. Dielectric loss factor (60Hz) 0,003. Thermal Conductivity W/mk > 1,0.

Easy put it on IC and heatsink. Included: 100 x Silicon Thermal Pad. The mini pad has stickiness, good conduction. If item is defective after 3 months, you can still send it back to us. We will send you a new one after receiving the defective item.

Heatsink Material:Silicone. Compatible CPU:CPU. Thermal Conductivity: 1.2W~2.0W. Silicone pad Size:10mm 10mm 1mm. 100 pcs 10mm 10mm 1mm pads.

High-Density: Arctic Silver 5 contains over 88% thermally conductive filler by weight. Arctic Silver 5 is optimized for a wide range of bond lines between modern high-power CPUs and high performance heatsinks or water-cooling solutions.

Weight: 20g. Manufacturer: Arctic Cooling. Don't forget to look at. See ourAbout m e Page.

The connection thus created is super strong and has excellent heat transfer characteristic. Thermally Conductive Adhesive. dielectric strength: 20 KV/mm. dielectric loss factor (60Hz): 0,003. thermal conductivity: > 1,0 W/mK.

One of the best Non-curing Thermal Pastes Arctic MX-2 4g Z0903/ OR-MX2-AC-01. Low Thermal Resistance/High Thermal Conductivity Dissipating Heat Efficiently. MX - 2 (4g). High Thermal Conductivity. Low Thermal Resistance.

Due to these properties, Coollaboratory Liquid Pro surpasses the best high performance heat conducting pastes by a multiple. We have collected and linked all tests for you. Read the impressions objective tester and assure yourself of the fact of the quality and capacity of the Coollaboratory Liquid Pro heat conduction paste.

AK-TT12-80 Thermal Adhesive Tape. • Good thermal performance. Thermal conductivity 0.9 W/m. Colour White. Product code AK-TT12-80. Tickness 0.30mm.

ArctiClean is a two-step cleaning process that removes existing thermal grease or pads from your heatsink and processor or any other IC, and prepares the thermal surface for a fresh application of thermal interface material.

1Set(50Pcs) x Sticker Thermal. Quantity:1Set(50Pcs). And due to the difference between different monitors, the picture may not reflect the actual color of the item. Also note that monitor settings may vary from computer to computer and may distort actual colors.

100 x 10mm 10mm 0.5mm Heatsinks Thermal pads. Thermal Conductivity: 1.2W~2.0W. VERY good heat conduction, very good malleability. The color of photos may vary from different monitor. We also try our best to show the material in a color that is as close as possible to the original, all our photos are made using light that is as close to natural as possible and avoid color variation.

Feature: Stars-922 Heatsink Plaster Thermal Conductive Glue Thermal properties, strong adhesion. Melting capacity: 0 (200degree celsius/ 24Hours) Evaporation: 0.001% (200 degree celsius/ 24Hours) Thermal conductivity: > 1.2W/m-K Thermal Impedance: <0.06 Clotting time: 3min (25 degree celsius) Strength of connected buildings: 25Kg Insulation coefficient: > 5.1 Dissipation coefficient: <0.005 Temperature resistance: 200 degree celsius Net Weight: 5g Instructions: 1. When using, directly extrude the product, rub the surface of the adherend, and cover it immediately after use, in case of trial again; 2. The surface fixed speed is related to the relative humidity and temperature in the air; the higher the temperature, the faster the curing speed, and vice versa; 3, the recommended thickness.

This thermal grease can be used on the rear side of the heat sink which has no thermal pad. It will improve the heat dissipation of your processor. High thermal conductivity. High temperature resistance.

0.5mm Thermal Pad Sheet Heat Sink for ComputerCPU Graphics Chip 100x100mm. 7, wait for about 2 minutes, carefully peel off the other side of the release paper from the thermal sheet, that is OK. Super soft, a little sticky, good thermal conductivity, easy to cut, feels like plasticine, but has a certain degree of plasticity, super insulation, there is a sense of cool put on the arm!

ArctiClean 1 Thermal Material Remover ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. ArctiClean 2 Thermal Surface Purifier The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material.

The GELID applicator enables an easier application. - GELID Applicator Supplied. Thermal Conductivity - Ultimate Heat Conductivity. Installation of the products is at your own risk. Manufacturer's Model Number:TC-GC-03-A.

3M double sided thermal adhesive tape. This thermal tape cannot be used on a CPU/GPU. If you use this tape on a CPU/GPU, you will fry it. The best thermal parts. - high thermal conductive. If you need thermal protection for your CPU/GPU do NOT use this product.

Thermal compound is necessary to create a reliable transfer of heat from your computer's processor to its heatsink to keep your CPU from overheating. This thermal grease can be used on the rear side of the heatsink which has no thermal pad. It will improve the heat disipation of your processor.Professional grade thermal pasteComes in syringe style tube for accurate and easy applicationThese tubes hold around 0.5g of thermal pasteA good thermal compound that does the job very efficientlyIdeal for 360's, Processors, Heatsinks CPU's GPU's and other component devicesColor: whitePackage Contents: 1 x High thermal greaseNote: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement.

It is ideally suited for use in CPU, GPU cooling and other applications between power semiconductor components and heat sinks where thermal conductivity is a major factor. High Thermal Conductivity. Low Thermal Resistance.

The ARCTIC MX-4 is a premium-grade thermal paste with exceptional performance and ease of application. The new formula in the ARCTIC MX-4 features optimal thermal conductivity and low thermal resistance.

ArctiClean 1 Thermal Material Remover ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. ArctiClean 2 Thermal Surface Purifier The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material.

This thermal grease can be used on the rear side of the heatsink which has no thermal pad. Thermal conductivity: 1.829 W/m-k. Thermal resistance: 0.123 C-in2/w. Paste Colour: Grey. It will improve the heat dissipation.

Arctic Cooling MX-4 4g Tube. Thermal Conductivit y It does not cover general ware and tear or parts and consumables that are expected to be replaced as part of using the product. Details of the manufacturers warranty will usually be included with the product or found on the manufacturers website.

Model: Arctic MX-2. 1 X 4g Thermal grease. Material: Thermal grease. Thermal conductivity: 5.6 W/(mK). Once applied, you do not need to apply it again as it will last at least for 8 years. EASY TO APPLY: With an ideal consistency, the MX-2 is very easy to use, even for beginners.

1 10 PCS Thermal Conductive Paste. Thermal conductivity: >0.965W/m_k. Excellent Thermal Conductivity:>0.965 W/(mK). Temperature resistance:> 0.262. Material: Silicon grease. High stability and reliability, Ideal for overclocking, PC with a powerful CPU and GPU ,Water cooling, or liquid cooling.

Thermal Conductivity: 1.2W~2.0W. Function:Soft, with a little viscosity.Good heat conduction, very good malleability.

High performance non-silicone thermal pad construction. Good dielectric performance. Soft and conformable for use on non-flat surfaces. Made by 3M 9448A,Thickness=0.15mm.

1 Piece Thermal Conductive Tape. Thermal Adhesive Conductive Tape Coo. Double Thermal Adhesive Conductive T. Thermal Conductive Tape Double Side. 18mm Thermal Conductive Tape Double. - High thermal conductivity performance and insulation, strong adhesion, which can be tightly and firmly fit the heat source devices and heat sink.

Has excellent thermal conductivity, thermal conductivity greater than 3.05W / (mk). - Low oil complex, non-volatile. - High thermal conductivity. Electronic components, electrical and other fields are used, excellent thermal performance.

Properties of Thermoconducting Silicone Paste “H”. It facilitates heat transfer between the electronic components and radiator. It is necessary for correct operation of any type of temperature sensors.