MFJ Manual Radio Tuner

<p>Brand New MFJ-9232 QRP Mini Loop Antenna Tuner. </p><p>This is an estate item. </p><p>Please refer the photographs as they are the description. </p><p>This item will be shipped with USPS Priority Mail.</p>

ANTENNA TUNER, SHORT WAVE LISTENER, WITH PREAMP. 20 dB attenuator prevents overload. MFJ-959C ANTENNA TUNER, SWL, WITH PREAMP. It covers 1.6 to 30 MHz. Don't Miss Rare DX Due To Signal Power Loss Between Your Receiver and Antenna.

MFJ-969 - 300 Watt Roller Inductor Antenna Tuner w/ Built-in 4:1.

MFJ-941E, Manual Antenna Tuner, HF, 300 Watts, w/Mini Cross Meter, 4:1 Balun.

Up For Buy It Now (1) MFJ VERSA TUNER II MODEL MFJ-941D. A 1:4 balun k built in for connection to balanced lines. The MFJ-941D will monitor either SWR or RF transmitter power in two ranges, 30W or 300W.

<p dir="ltr">MFJ-945E MOBILE ANTENNA TUNER HF 300W cross needle SWR WATTMETER and come with mfj1702B. Condition is New in the box but old. Shipped with USPS Priority Mail. Judge for yourself and enjoy </p>

The MFJ-971 is a compact 200-Watt portable tuner MFJ QRP transceivers. MFJ 971 - MANUAL ANTENNA TUNER - 200 WATT - 1.8-30 MHZ. This is a new in the box MFJ 971. The T-match tuner covers 1.8-30 MHz and tunes almost any coax, wire, or balanced-feed type antenna (a 4:1 toroid balun is built in for balanced line).

Tested And Working Perfectly.

It is not as new nor pristine but its in good condition, paint work has scratches and marks. These are still in production and cost £145 new. There is no instruction manual included, you can download the PDF from the LDG site.

There is no instruction manual included, you can download the PDF from the MFJ site. N-type socket on the top, not SO259.

Tuner as a few minor paint on the edge missing typical mfj but other than that is in very good condition. The MFJ-924 440 MHz UHF Antenna Tuner covers 440 MHz. It will give you low SWR with practically any antenna.

Covers all main bands between 1.8-60Mhz and will handle up to 300 watts. It reads forward/reflected power in 300/60 and 30/6 Watt ranges. Covers 1.8 to 60 MHz. ON/OFF lamp switch. Requires 12 volts for lamp.

Handles 300 Watts. It reads forward/reflected power in 300/60 and 30/6 Watt ranges. ON/OFF lamp switch. Requires 12 volts for lamp. 1000 Volt capacitors Efficient airwound inductor gives you lower losses and more Watts out.

Type: MFJ 949E manual tuner. Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.

The inductor switch is the most likely component to burn up in any antenna tuner. Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.

20 dB attenuator prevents overload. Don't miss rare DX due to signal power loss between your receiver and antenna. The MFJ-959C provides proper impedance matching so you can transfer maximum signal from antenna to receiver.

MFJ-962D is new and improved! Roller coaster inductor. The compact MFJ-962D handles 1500 Watts PEP SSB amplifier input power (800 Watts PEP SSB amplifier output power). 2 coax positions. 6 way antenna/load switch.

An efficient 12 position air wound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet has a durable scratch-proof multicolor Lexan front panel matches your rig perfectly and fits right into your station.

You get a 300 watt full featured, general purpose antenna tuner that covers 1.8 - 30 MHz. It tunes all types of antennas and feedlines including random wire, coax and balanced lines. The MFJ-934 is unique because it has a built-in artificial ground.

Select one of four antennas and one of six transceivers in any combination with just two easy-to-use rotary switches. All unused inputs are grounded. Automatically grounds all inputs when you turn off transceiver.

Simultaneously in 300/60 forward and 30/6 reflected Watt ranges and has an ON/OFF lamp switch. With a built-in bypass switch, you can bypass your tuner and connect your transceiver directly to your antenna.

Diamond CMF 2000. Common mode attenuation:more than -50dB (max). VSWR:Less than 1.2. Insertion loss:Less than 0.2dB.

MFJ 16010 Strider on all 1.8 to 30 MHz bands. It manages up to 200 watts at the output. Acstring high and low impedances interchanging entry and exit; it is equipped with SO-239 connectors. MPN MFJ 16010.

300W BALANCED LINE. A 1:1 current balun is placed on the low impedance 50 input side to convert the balanced T-Network to unbalanced operation. The balun is made of 50 ferrite beads on RG-303 Teflon coax to give exceptional and efficient isolation.

MFJ AirCore Roller Inductor with new fast-tune Crank Knob. It gives you the widest matching range and is the easiest to use of all matching networks. With MFJ’s new high value 500 pF air variable capacitors and new low loss roller inductor, it easily handles high power efficiently.

The inductor switch is the most likely component to burn up in any antenna tuner. Custom designed inductor switch, 600 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.

Extra wide matching range lets you tune nearly any antenna. Push button selects forward/reflected power in 300/60 and 30/6 Watt ranges. 150W ANTENNA TUNER. Tiny tuner handles full 150 Watts! Its no toy -- its got guts!

The inductor switch is the most likely component to burn up in any antenna tuner. Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.

The inductor switch is the most likely component to burn up in any antenna tuner. Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.

You get 6-position antenna switch that lets you select two coax lines and/or random wires (direct or through tuner), balanced line and external dummy load. It minimizes unbalanced currents only if the antenna is perfectly balanced -- not the case with practical antennas.