Model Railway Decoders

LaisDcc Decoder Chip 11 Wire NEM652 8 Pin 2 Wires Stay Alive. Part No. 860021.

1 x 4 Function TT or OO / HO scale DCC decoder with fitted trailing 8-pin NEM 652 plug. Switchable for digital DCC or Analogue DC running. Supports all NMRA/NEM standard specifications and common programming modes, including consists.

1 x motor 4 Function TT and OO / HO scale bare wire DCC decoder. Switchable for digital DCC or Analogue DC running. Supports all NMRA/NEM standard specifications and common programming modes, including consists.

1 x Adaptor to allow OO / HO scale Loco's with the MTC 21-pin DCC interface to to be fitted with the more common 8-pin NEM 652 DCC decoders. New low profile design of the 8-pin NEM 652 socket to enable the adaptor to fit more makes of locomotive.

Hornby Digital DCC Locomotive Decoder (R8249). That includes Bachmann locos. Standard DCC decoder for OO and N gauge trains by manufacturers including Hornby, Bachmann and Peco. • Four On/Off function outputs.Two of the function outputs are dedicated for the head / tail lights.

@@@@ Current edition from Laisdcc is Version 2 footprint and Version 5 firmware @@@@. Laisdcc part numbers: 860021 and 860007. Connect to colour matched wires on rear of Laisdcc decoders. The Hornby Select system is NOT NMRA compliant and so does not support these decoders.

LaisDcc DCC Stay Alive Kit. Part No. 860007.

Hornby Digital Decoder v1.3 NMRA Compliant. The Hornby locomotive decoders may be used with all standard digital control equipment that conforms to the NMRA standards. Control of the motor's rotational speed (load compensation). Acceleration and deceleration separately adjustable. Selectable for operation with 14, 28, 128 speed steps. Programming on main track. Four On/Off function outputs.Two of the function outputs are dedicated for the head / tail lights. Motor overload current protection. With NMRA RP-9.1.1 / NEW652 medium plug. Complete in sealed factory packet. Free Shipping.

1 x 6 PIN NEM 651 DCC DECODER TRAILING SOCKET WITH PRE-WIRED HARNESS. Professionally wired, RoHS compliant. Wire length is approx.

Part No. 860027.

1 x motor 4 Function OO / HO scale DCC decoder with fitted on-board MTC 21-pin plug. Switchable for digital DCC or Analogue DC running. Supports all NMRA/NEM standard specifications and common programming modes, including consists.

@@@@ Current edition from Laisdcc is Version 2 footprint and Version 5 firmware. Laisdcc part number: 860021. The Hornby Select system is NOT NMRA compliant and so does not support these decoders. We are also hearing about issues with the Hornby Elink/Railmaster combination.

@@@@ Current edition from Laisdcc is Version 2 footprint and Version 5 firmware @@@@. Laisdcc part number: 860012. This is a bare wire decoder that will need to be soldered or otherwise connected to your installation.

@@@@ Current edition from Laisdcc is Version 2 footprint and Version 5 firmware @@@@. Laisdcc part number: 860020 - replacing legacy part number 860018. The Hornby Select system is NOT NMRA compliant and so does not support these decoders.

LaisDcc Decoder Chip 8 Pin Direct 1 Wire Function 2 2 Wires Stay Alive. Part No. 860020.

LaisDcc Pre-Wired 2 Pin Micro Connector 1mm Pin Pitch. Part No. 860028. This is a simple, two pin, 1 mm pitch, micro quick plug wired connector. When connected together it is 2.5mm wide by 1.5 tall by 3mm long, and it has 150mm long wires on both ends.

1 x Laisdcc NEM662 NEXT18 motor 6 function DCC decoder. Switchable for digital DCC or Analogue DC running. Supports all NMRA/NEM standard specifications and common programming modes, including consists.

LaisDcc Decoder Chip 6 Wire (NEM651) 2 Wires Stay Alive. Part No. 860012.

NOTE: THIS DECODER HAS NO LOCO MOTOR CONNECTIONS AND CANNOT BE USED TO DRIVE LOCO MOTORS. Supports all NMRA/NEM standard specifications and common programming modes. Decoder settings locking facility.

DCC Concepts DCC-AD218.6-1 - 1 x 21 to 8 Pin Adapter (1 Only). DCC Concepts DCC-AD218.6-1 - 1 x 21 to 8 Pin Adapter (1 Only) 21 to 8 Pin Adapter. Add to Favourites.

Hornby sound chip and speaker been used good working order speaker wire been cut sold as seen

DCC Concepts DCD-GS-BR - 2 x 2-wire LMS/BR Ground Signal.

I have for sale USED ZIMO MX622N 6-Pin DCC decoder. This item is complete with instructions and will be well packaged for delivery. Decoder should be set to DCC #3 but I would suggest resetting by send 8 to CV8 Save £5 on new price.

Part Number: DCC26. Harnesses: 90mm overall length, removable 9 pin JST, 8 pin NEM652 plug with wires dressed to UK standard. Power Handling: 1.1A Motor Drive (1.6A peak), 4 light/switchable functions - each 150mA, 200mA max.

I have for sale a brand new ZIMO MX622N 6-Pin DCC decoder. This item is brand new factory sealed as per the pics.

@@@@ Current edition from Laisdcc is Version 2 footprint and Version 5 firmware. Laisdcc part number: 860019. To fit 21MTC standard 21 pin socket in DCC ready locos. The early Hornby Select system is NOT NMRA compliant and so does not fully support all the functions of these decoders.

LaisDcc Decoder Chip 6 Pin (NEM651) 2 Wires Stay Alive. Part No. 860013.

LaisDcc Decoder Chip 21 Pin (21MTC) 2 wires stay alive. Part No. 860019.

@@@@ Current edition from Laisdcc is Version 2 footprint and Version 5 firmware @@@@. Laisdcc part number: 860013 series 2. The Hornby Select system is NOT NMRA compliant and so does not support these decoders.

HORNBY R8249. DCC DIGITAL 4 FUNCTION LOCOMOTIVE DECODER.

Hornby DCC Digital TTS Sound Decoder (Class 37) (R8102). These can include whistles, horns, start-up, idle, cold start, In motion sounds and many more. The decoder also possesses all of the features attributed to our popular R8249 decoder.

DCC Concepts DCD-ADS8SX Accessory Decoder CDU Solenoid Drive SX (8 Way). DCC Concepts DCD-ADS8FX Universal Solenoid Accessory Decoder (8 Output). DCC Concepts DCB-BDKIT 2 Pairs of Baseboard Dowels with Drills.

Installation is easy – just match the blue and black wires to the blue and black stay-alive wires already attached to your Zen decoder. Connecting a stay-alive to a sound decoder?. Look for ZNSSA1 and ZNSSA3 high power stay alive.

Gaugemaster DCC Digital Locomotive Decoder, 9 pin harness to 8 pin plug.

HORNBY DIGITAL. DIGITAL POINTS DECODER. ONLY A PHONE CALL AWAY. WANTED: SECOND-HAND COLLECTIONS. TOP PRICES PAID.

Here for sale is ONE Bachmann 36-558A 6 Pin DCC Decoder. I have too many locomotives many of which have had a DCC chip. fitted but not really been used and as a result are being sold.

8 Number High quality four function Back-EMF equipped decoder with a 75mm 8pin harness

Gaugemaster DCC27 OMNI 21 & 8 Pin Decoder. A really versatile decoder for use with locomotives that have 8 Pin or 21 Pin sockets. Number of Pins: 21 (8 Pin Harness). Width: 16mm. Number of Functions: 4.

LaisDcc NEM652 8 Pin Fixed Wired Harness. Part No. 860001. These 8-pin NEM 652 sockets are mounted on a small PCB enabling you to fit a DCC decoder to a non DCC locomotive.

90mm long. Fits many standard us made decoders. DCC Concepts DCD-ADS8SX Accessory Decoder CDU Solenoid Drive SX (8 Way). DCC Concepts DCD-ADS8FX Universal Solenoid Accessory Decoder (8 Output). DCC Concepts DCB-BDKIT 2 Pairs of Baseboard Dowels with Drills.

OO Model RailwayHornby R8249 Digital 4 function Locomotive decoder.