Other Car Engine Tuning & Chips

0.3L Universal Baffled Aluminum Oil Catch Breather Can Reservoir Tank Black. Breather system. 1 x Breather filter. Internal baffle DUAL chamber filter Catch. Universal oil catch tank Made out of T6061Aircraft Lightweight.

AN -6 Fast Flow Stealth Black 90 Degree Hose Fitting. Fitting, Hose End, Fast Flow Swivel Seal, 90 Degrees, -6 AN Hose to Female -6 AN, Aluminum, Stealth Black, Each. The unique taper design revolutionised hose assembly by not cutting into the inner hose liner, yet providing a positive grip on the hose to eliminate leakage or separation.

• Fits Any Turbo Application With Actuator. • Increases Performance Without Increasing Boost. It is requested that the item is installed and setup by a qualified technician. • Small And Light. We will require an engineers/specialists report if you are claiming for an item not fitting the vehicle it is listed for (we test all our products, we know what they fit and what they don't).

Capacity: 0.5 Litre / 500ml. Universal 500ml Engine Oil Catch Tank With Breather Filter. 1 Breather Filter. Universal Aluminium Engine Oil Catch Tank 0.5L 3/4" 19mm. Oil Catch Tanks. Cath Tank height : 141mm (including filter).

This stainless steel hose consists of a synthetic-nitrile rubber inner tube with a vulcanised yarn braided covering. On top of that, there is a heavy duty, protective, full stainless steel braid (304 grade) on the outside, making it exceptionally lightweight, flexible, and durable.

1/8 NPT to 7 - 8mm (I.D of your hose) 90 degree push on barb adapter, male to male union for adapting from NPT to barb, allows easy connection of your hose to NPT fittings. 1/8 NPT to 7 - 8MM (5/16") 90 DEGREE PUSH ON BARB ADAPTER.

This stainless steel hose consists of a synthetic-nitrile rubber inner tube with a vulcanised yarn braided covering. On top of that, there is a heavy duty, protective, full stainless steel braid (304 grade) on the outside, making it exceptionally lightweight, flexible, and durable.

Full fitting kit included - including 9/10mm 15mm fittings. Universal Oil Catch Tank. We will require an engineers/specialists report if you are claiming for an item not fitting the vehicle it is listed for (we test all our products, we know what they fit and what they don't).

This is a 1 litre universal water tank, which includes level pipe and fittings. Machined bung on the bottom for drainage or nozzle installation. Width 170mm inc flange.

4x BRAKE HOSE RETAINING CIRCLIP. 4x Qty.

AN -6 (AN6) aluminium lightweight anodised reusable straight fast flow type hose fitting, 360 degree swivel end with locking pin. This fitting is to be used with our 100 series braided rubber internal hose.

EGR blanking plate made from the highest quality. Installation is simple and easy to fit,simply remove the EGR bolts and slip in the blanking plate. Then re-tighten the bolts. Let your engine breathe what it was made to breathe. Air with a dash of diesel!

Braided Hose Features 10 Feet AN-6 Nylon Braided Hose. Covered with High Quality Woven Nylon to Enhance Flexibility and Give a Cool Racing Appearance. Made of durable CPE synthetic rubber tube bonded and secured by Nylon and 308 Stainless Steel outer braid.

0.5L 0.5 LITRE OIL BREATHER TANK CATCH CAN WITH 12mm (1/2") OD. Type : Oil Breather Tank. 1 x tank 0.5L, with accessory as photo show. Capacity : 0.5 Litre / 500ml. Step 1. Step 2. Step 3. - Bank Wire (T/T) acceptable.

AN08 Male Aluminium Weld On Fitting 6082. To Fit Hose Size AN08, -8. C40-6CE-93A AN08 27.5 2.0 18.0 25.0. Material 6082 Aluminium Alloy. Fitting Type Male. Part Number Thread Size A (mm) D (mm) C (mm) D (mm).

Easy to fit blanking plate, fits between EGR valve and exhaust gas recirculate pipe and there is no need to remove EGR or recirculate pipe to fit, 10-15. It also fit's the Evoque that has the 2.2 engine.

AN -6 (AN6 AN 06) to ORB-6 (9/16" UNF) O-Ring Boss Adapter In Stealth Black. Ideal for Aeromotive, Fuelab fuel pressure regulators with a (9/16" UNF x 18 TPI thread). Automotive / Aerospace-quality AN-6 to 9/16" UNF Straight Adapter.

AN -4 Fast Flow Swivel Seal Stealth Black Fuel Hose Fitting. Each component is precision-machined to exact tolerances for trouble-free performance. The unique taper design revolutionized hose assembly by not cutting into the inner hose liner, yet providing a positive grip on the hose to eliminate leakage or separation.

AN -6 (AN6) aluminium lightweight anodised reusable 90 degree push on hose fitting, 360 degree swivel end with locking pin. This fitting is to be used with braided or standard rubber hose, the barbed end will fit into a 9mm to 12mm I.D. hose.

AN -6 (AN6) aluminium lightweight anodised reusable straight fast flow type hose fitting, 360 degree swivel end with locking pin. This fitting is to be used with our 100 series braided rubber internal hose.

Laser Iridium® spark plugs provide superior ignitability and long service life. You will receive 4 Genuine NGK Laser Iridium IFR7G-11KS Spark Plugs. · Laser welded Iridium centre electrode tip.

On top of that, there is a heat resistant nylon sheathing (upto 150 degrees celcius). The Nylon braided hose is significantly lighter and more flexible than the stainless steel braided version. For Example; 4 x 1m = 1 x 4m.

7/16x20 UNF (AN-4 JIC) stainless steel banjo bolt, suitable to use with a 7 /16x20 UNF banjo eye fitting. 7/16x20 UNF (AN-4 JIC). Stainless Steeel 7/16x20 UNF (AN-4 JIC) Banjo Bolt. Suitable to use with our 7/16x20 UNF (8.4mm. ).

Finish: Satin Black. Auctiva's FREE Counter. It has been formulated to give the appearance and durability of a baked-on finish. It provides a porcelain-like finish that is chemical, corrosion, rust and salt resistant.

AN -4 (AN4) stainless steel braided PTFE 200 series hose, comprising of a PTFE smooth bore internal liner and a T304 high tensile stainless steel overbraid (corrosion and fire resistant). This hose can be used with ANY fluid (fuel, brake/transmission, lubricant/oil & coolant) type.

2.4 TDCi Duratorq (2006->) 100HP, 115HP, 135HP, 140HP 3.2 TDCi Duratorq (2007->) 200HP. 2.2 TDCi Duratorq (2006->) 85HP, 110 HP, 115HP, 130HP, 140HP. Puma(2007->) 2.4 TDCi. EGR blanking plate made from the highest quality stainless steel.

AN -10 Fast Flow Stealth Black 90 Degree Forged Fuel Hose Fitting. Fitting, Hose End, Fast Flow Swivel Seal, 90 Degree Forged, -10 AN Hose to Female -10 AN, Aluminium, Stealth Black, Each. Each component is precision-machined to exact tolerances for trouble-free performance.

AN -6 (AN6) stainless steel braided rubber 100 series hose, comprising of a synthetic rubber internal liner that is partially woven with a stainless steel braid during the curing process and finally braided externally in a high tensile stainless steel.

AN -3 (3.17mm 1/8") PTFE Core (Teflon) Stainless Steel Braided Hose. Applications when used in conjuction with the AN-3 Teflon Hose fittings Teflon® Lined Hose, Teflon Braided Stainless Steel, -3 AN, 0m.

Fitting, 8mm Barb 90 Degree, to Female -6 AN, Aluminum, Black, Each. Fitting Angle: 90 degree. Each component is precision-machined to exact tolerances for trouble-free performance. Enables Regular Fuel Hose To Attach To AN -6 Fittings.

AN -6 (JIC-6 8mm. 5/16" I.D) Stainless Braided Black PVC Coated Teflon PTFE Hose 1m. Hose, Teflon Braided Stainless Steel, -6 AN, PVC Black COAT, 1m. Applications when used in conjunction with the AN-6 Teflon Hose fittings.

10 Feet AN-6 Stainless Steel Braided Hose. Partial Coverage Stainless Steel Inner Braid is woven into the Inner Liner of high quality synthetic rubber. Full Coverage Outer Braid of High Tensile Stainless Steelbonded to the hose liner provides maximum pressure capabilities, while maintaining the beauty, and flexibility that is vital for the quality of High Performance Hose.