Other Interface & Add-On Cards

We reserve the right to replace discontinued products that are still under warranty with the nearest equivalent specification product. We reserve the right to repair or replace any faulty components.

Add to Favourites. Fully Tested. We Also Record Serial Numbers.

Product Manual: OWC Data Doubler. Testing has demonstrated that Apple factory hardware does not reliably support a 6G (6Gb/s) Solid State Drive or Hard Disk Drive in the optical bay of 2011 MacBook Pros (ModeI ID8,1; 8,2; 8,3).

Compact Flash CF to 44 Pin 2.5" IDE(Male) Adaptor Converter. - 44-pin IDE interface (male, connect to 2.5" IDE cable). 1 x CF to 2.5" IDE(male) 44 Pin Adapter. - Compact Flash to 2.5" Male IDE Adapter.

Also supports Mini SD /Micro SD/T-Flash / MMC Micro/M2 by use special adapter. The internal card reader CR35U2B-AU6370 USB 2.0 Embedded Card Reader is designed to be part of the desktop PC. The card reader/writer is equipped with six slots.

1pc x Video Graphics Card Block. Suitable for half height graphics card, suitable for HTPC chassis installation. The item shown in this picture is exactly you will received.

SD SDHC MMC Card to 2.5"44 Pin IDE MALE ADAPTER. Compatible with MMC system specification 2.0 . 44-Pin Male IDE To SD Card Adapter. SD card as a standard IDE hard disk. It power from 44-Pin IDE interface.

Single Slot PCIe x16 Riser Card - 2u. Right angled PCIe slot centre = 35mm above motherboard PCB.

Transfer PCI Express to PCI slot Easy to be installed and plug to install. Provide 4 Pin Power supply connect (support 12V and 5V, must have power supply connect) PCI-E, 2.5Gbps data transmission speed. Support 32 bit PCI bus, bus speed up to 66/33 MHZ Accord with PCI Express 1.0 Compatible with PCI Version 2.3 Support PCI slot, 3.3V/1A, 3.

If you’re looking at this I’m sure you know it’s a Sanlink 2 dual 8gbps adapter to thunderbolt. Attach you’re ultrafast storage to fibre san. Happy bidding U.K. postage only

NO DRIVE INCLUDED - BARE CARD ONLY. Thermal transfer pads have been left in place as shown in the photo. Monitors, Projectors and TVs. PCs, Workstations & Servers. Used item, may have marks from prior use.

High quality flexible ribbon riser card.

5pcs PCI-E 1xto 16x Powered USB 3.0 Extender Riser Adapter Card for Bitcoin. PCI-E 1x to 16x Powered USB3.0 Extender Riser Adapter Card 4PIN Bitcoin Litecoin. USB 3.0 PCI-E 1x to 16x Powered Extender Riser Adapter Card 60cm Cable Mining.

Lava Bi-directional Parallel board - working. PCI network card - working, nearly new. one Sound Blaster (note old bus, not PCI). one SRS 3D sound car d (note old bus, not PCI).

Gigabyte Alpine Ridge v2.0 Thunderbolt 3 PCIe Card. Gigabyte Motherboards with GC-ALPINE RIDGE support < BIOS update required>. Dual Thunderbolt™ 3 Ports (USB Type-C™). GC-Alpine Ridge rev. 2.0. Manufacturer Gigabyte Uk.

(Install the card as a vital hardware component when building a PC, or upgrade an older PCIe based desktop. This is PCI-E card, NOT PCI card. Do NOT install this PCI-E card when the computer is on. （Note: 15-Pin SATA cable is not included).

The adapter is compatible with PCIe 3.0 motherboards and is also backward compatible with PCIe 2.0 and PCIe 1.0. Get ultra-fast data access by adding a PCIe M.2 SSD to your existing computer. You can mount the PCIe M.2 drive directly onto the adapter, giving you an easy and convenient way to improve your system performance and expand overall internal storage.

Startech PEX1P PCIe Parallel Port Interface 1 Port Adapter Card. PCI-e Parallel Port Adapter Card as described and photographed here. There are drivers available for all Windows versions from XP to Windows 10.

1 X IDE 100/133 HDD CD DVD TO SATA Converter Adapter. 1 X IDE TO SATA POWER CONNECTOR. Support IDE drive size larger than 240GB. Plugging directly into your Hard Driver' s SATA port. 1 x SATA CABLE.

Transfer PCI Express to PCI slot Easy to be installed and plug to install. Provide 4 Pin Power supply connect (support 12V and 5V, must have power supply connect) PCI-E, 2.5Gbps data transmission speed. Support 32 bit PCI bus, bus speed up to 66/33 MHZ Accord with PCI Express 1.0 Compatible with PCI Version 2.3 Support PCI slot, 3.3V/1A, 3.

Interface Parallel. 1 x Parallel port (with ribbon cable). External Ports 1 - DB-25 (25 pin, D-Sub) Female. Note Selectable power output on pin 9 of the serial port. 2 - DB-9 (9 pin, D-Sub) Male. Internal Ports 1 - LP4 (4 pin, Molex Large Drive Power) Male.

Untested as unable to use. Looks in good condition. Came with a bundle of Fischertechnik. There is what looks to be a sensor as shown. A 9v power supply unit included. & Some extra plugs

It is widely compatible with Windows and Linux desktop PCs with PCI bracket to be easily mounted on backplate of any standard PC cases. ORICO PVU3-5U2I x 1. ·Extends 7 USB3.0 ports with 5 external USB-A ports and one dual port 19-pin internal connector from an available PCIE socket to your Windows Desktop Computer.

It uses radio signals in the 433MHz ISIM band available for safe short range low power use. It can be a great learning tool for children. 1 x Raspberry Pi RF transmitter board. 2 x RF sockets. Sockets sited too close to each other can adversely affect signal reception.

Magic Gate Duo. No software or manuals included. Includes USB 2.0 internal connector cable to connect to Motherboard which then connects to the 3.5" Adapter Bay. BLACK Drive Bay (make sure this matches your case colour if you want it to match).

PCI 32-bit Riser Card for 1U IPC chassis and slim server case. Ideal for use in servers and shuttle style mini PCs. One 5V 32-bit PCI slot. All are neatly wrapped in anti static bubble bags as shown in the final photo.

(GENUINE Panasonic FZ-G1 Toughpad. what you are buying is only the BRIDGE BATTERY). This tiny second battery allows you to change batteries without having to power off the device. The feature can also be used to boost the total battery life to 20 hours.).

DekTec DTA-107 Rev. 3 QPSK Modulator/Upconverter Card Condition is Used. Dispatched with Royal Mail 2nd Class.

Using solderless pins the adapter slides onto the back of a Pi Zero GPIO (If a permanent connection is required the adapter can still be soldered to the GPIO header). It's advised to connect the adapter to the Pi Zero before connecting the USB cable to the adapter, once connected the Pi Zero can be powered on/off without issue (to prevent the serial RX/TX pins being connected before the ground pin).

(GENUINE Panasonic FZ-G1 Toughpad. what you are buying is only the BRIDGE BATTERY). (note: THIS IS A MK1 PULL). WILL WORK IN MK1 models (will work in FZ-G1Axxxx ). This tiny second battery allows you to change batteries without having to power off the device.

Add to Favourites. We Also Record Serial Numbers.

Transfer PCI Express to PCI slot Easy to be installed and plug to install. Provide 4 Pin Power supply connect (support 12V and 5V, must have power supply connect) PCI-E, 2.5Gbps data transmission speed. Support 32 bit PCI bus, bus speed up to 66/33 MHZ Accord with PCI Express 1.0 Compatible with PCI Version 2.3 Support PCI slot, 3.3V/1A, 3.

It is widely compatible with Windows and Linux desktop PCs with PCI bracket to be easily mounted on backplate of any standard PC cases. ·Extends 4 USB3.0 downstream ports from mother board PCIE socket to your Windows Desktop Computer.

WinTV-HVR-1100 brings analogue and digital terrestrial TV (DVB-T) to your PC! The WinTV-HVR-1100 supports digital freeview (where available) for watching, recording and playback of TV on your PC's screen.

Compact Flash CF to 44 Pin 2.5" IDE(Male) Adaptor Converter. 44-pin IDE interface (male, connect to 2.5" IDE cable). 1 x CF to 2.5" IDE(male) 44 Pin Adapter. Compact Flash to 2.5" Male IDE Adapter.

More information atr eturns. MPN : Does Not Apply. Support both full-duplex and half-duplex operations. Integrated fast ethernet MAC, physical clip and transceiver in one chip. Does Not Apply. Compatible with Mac / Windows / Linux / Android.

Old spares that have been found in a cupboard, still sealed in original packaging. Untested & no warranty.

One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket. Compatible for SD, SDHC, SDXC & MMC specification. Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk.

USED UNIT - PULLED FROM WORKING SERVERS.

ORICO USB 3.1 PCI-E Card x1. -Material: Aluminium & Plastic. -External Interface: USB 3.1 Type A Female x 1; USB-C x 1. · Supports driver for 32/64 bit Windows 10, 8.1, 8, 7, Vista; NOT compatible with Mac OS X.

ORICO PVU3-5O2I x 1. Expand Your Windows Desktop ·Easily to be mounted on rear bracket of standard desktop PC case. ·USB3.0 Interface: Type A Female x 5; Internal 19pin Head x 1. ·Application: USB3.0 to PCIE Expansion Card.

Mainly applied to the lateral transfer 1U server chassis or PCI-E 1X graphics riser card. PCI-E 1X Riser Card. 1 x PCI-E 1X Riser Card. Bear Pattern Pillow Newborn Infant Baby Support Cushion Pad Prevent Flat Head NY.

Features: 100% brand new and high quality 1 slot PCI Express X16 Riser Card for 1U IPC chassis 4 layer high-impedance circuit board design. Install PCI-E device at 90 degree right angle to the riser card. Protects PCI-E slot from the damage of removing and plugging frequently. Specifications: Height: 2.

Thunderbolt 3, USB 3.1, and up to 36W charging. SABERTOOTH Z170 MARK 1. X99-PRO/USB 3.1. X99-DELUXE II. MAXIMUS VIII RANGER. MAXIMUS VIII HERO. SABERTOOTH Z170 S. Experience blistering Thunderbolt 3 speeds and any-way-up connectivity.