Other Test, Measurement & Inspection

The pins are protected by a safety cover when not in use. Low battery indicator. Digital large size LCD display. Date hold and can hold value. We are always glad to assist you and stand by our products.

We reserve the right to substitute an alternative of similar specification at our discretion. "This compact tester is ideal for use in hard-to-reach locations". Current AC 100µA to 200A ±(2.5% 10d). Dynamic range of 2000 counts full scale.

A necessary tool for everybody who works with electricity. Touch the wire with the pen tip. Small and compact pen design for easy carrying. Compact, safety, & easy to carry. All outer surfaces are non-conductive for safety.

Mains Plug Tester. Suitable for testing the wiring correctness of a standard 13A trailing socket. Visual LED indication of wiring status. We use the following services Further Details. Compliances : BS EN 61010-1:1993.

UK mainland only. Order Cancellation. Requires 1x 9V Battery (included). Unwanted Goods. Accuracy: 0.1%. At Jazooli we understand that when you place an order you want your goods to arrive as soon as possible and with the minimum of fuss.

LED and BUZZER indication of wiring status. 230v AC (11mA). Plug in socket tester. A great product which can be plugged in to your sockets with audible and LED indication. The easiest and quickest way to check your sockets are safe!

Security Level: CE CAT. III 1000V / CAT. Audible and visual alarm always guard your safety. Alarm Mode: Sound and light alarm. Sound & Vision. Electric Torch: While LED illumination lamp. 5% off over £25 Coupon.

1 Induction test pencil. Alarm mode: Sound-Light alarm. NCV signal strength indication mode: Through alarm sounds of different frequency. of the fire wire is strong. we do our best give a satisfied solution.

Features: UT15C series test pen with the measurement of AC and DC voltage (contains three-phase alternating current (AC) measurements, three-phase AC phase indicator, on-off test, single pen measurement can determine the zero line and Firewire) function.   Specifications:   Parameter: Specifications Range Best Accuracy Model   UT15C LED AC/DC Voltage Indication (V) 12V 0~10V 24V 17V±2V 50V 35V±5V.

All Weather Mains Tester Screwdriver. Slotted screwdriver. With Pen Clip. Test bulbs and fuses, locate break points, check polarity & leakage. All orders are dispatched within 24 hours. Manufactured to a superior standard.

Display: Large LCD display. Range: 0~99.9% wood. Glad to deal with you in the future. Weight: 130g. Electrode pins: Integrated.

Battery Bulb & Fuse Tester. Load Test 1.5v AAA AA 9v PP3. Continuity test Bulbs. PP3, MN1604, 6F22, 006P. This Tester applies a small load to the battery being tested for more accurate testing. Free 9v Battery Included.

Multi-purpoe LED light source tester.

1 X DIGITAL CIRCUIT TESTER. #TEST RANGE:12-250 VOLTS.

Diamond indicator will be showed if the stone is a REAL diamond (Red light). Auto shut-off with a push button switch. If stone is Fake crystal, a simulant such as cubic zirconium ( CZ ), will be no reaction.

Compact, safety, & easy to carry. Frequency Range: 50 to 500 Hz. Item size: 152 23 15mm.

With protective cap. Handle the device carefully when the protective cap has been removed. The probes can cause injuries if used improperly. Keep the probes clean using a damp cloth and put them back in the protective cap.

High definition LEDs with clear audible tone. Your trustworthy socket tester. Audible fuse finding facility. Error-free indication of socket status. Bright LEDs out perform neons.

MASONRY, PLASTER, CONCRETE AND WOOD, GIVING BOTH AUDIO. SILVERLINE PORTABLE DAMP DETECTOR. AND LED INDICATION OF DAMP.

All the features of the Auto Probe but with an integral work light to aid use in dark engine bays plus an audible circuit tester for when the LED on the probe cannot be seen. Locate bad earths quickly.

Touch the wire with the pen tip. Small and compact pen design for easy carrying. Compact, safety, & easy to carry. Frequency Range: 50 to 500 Hz. All outer surfaces are non-conductive for safety. Cleaning: clean with damp cloth.

Kewtech Kewcheck R2 Ring Mains Socket Tester / Adaptor fits Fluke & Megger.

Hand-held tester checks power level of most 1.5V and 9V batteries, plus most fuses and bulbs. Requires 9V battery (not supplied). Product Information.

Kewtech 1780 Technical Specifications. Double moulded surface is designed to make holding the tester comfortable. Continuity Detection Range 0~400K Ω 50% (23 ± 5ºC). Peak Current Is <3.5mA (at 690V).

Mains Socket Tester 240V. Socket fault finder. If all three lights illuminate socket is wired correctly. Note: Wall socket not included. Test new and existing wiring in one safe and simple operation.

Alarm Mode: Sound and light alarm. Audible and visual alarm always guard your safety. Auto power-off feature conserves energy while the LED torch allows operation even on dark corners. Electric Torch: While LED illumination lamp.

New old stock in box. Unused

The T2271A from C.K Tools is an essential in any electrician's pocket. Model No: T2271A. Double insulated to ensure protection from use near live circuitry. Fire & Refuge. On/Off button for longer battery life.

The unit can test fuses and various electronic components.

Kewtech Loopcheck 107 Socket Tester. The most advanced socket tester available, for front line personnel. A standard socket tester does not check for the quality of the earth connection - the 107 does.

Dencon 13amp plug in socket tester. Several indicators to indicate the state of the socket and easy to judge. Light weight and compact size. West Yorkshire. The Best Quality. Need Help?. 4 Darnall Warehouse.

Display: Large LCD display. com, it just take a few minutes. Range: 0~99.9% wood. Auto Power Off: After approx.15 minutes. Glad to deal with you in the future. Product Show. Electrode pins: Integrated.

Diamond indicator will be showed if the stone is a REAL diamond (Red light). LED light and audio result indication. If stone is Fake crystal, a simulant such as cubic zirconium ( CZ ), will be no reaction.

Working current ≤0.05mA. Size(approx.). : handle length: 123mm/4.84in, pole length: 17mm/0.67in. Weight: about 25g.