Power Regulators & Converters

The module is used to start and stop the engine, indicate fault conditions, automatically shut down the engine and show the fault condition by LED. MPN : DSE501K. Model : DSE501K. The module has the ability to monitor the following conditions: Low Oil Pressure, High Engine Temperature, Auxiliary Shutdown and Overspeed.

Enter 36V 20A = 720W, input 48V 20A = 960W, input 60V 20A = 1200W. Input Current: 20A. Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security. Module Properties: non-isolated step-up module (BOOST).

Enter 36V 20A = 720W, input 48V 20A = 960W, input 60V 20A = 1200W. Input Current: 20A. Short circuit protection: Yes (input 20A fuse) double short circuit protection, the use of more security. Module Properties: non-isolated step-up module (BOOST).

Hold 1 standard 9V battery. 1 x 9V Battery Case. This battery holder with cover and switch, Can be used as a perfect external power source. Lead Wire Length: approx.15cm(5.91"). Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Output: DC 12V 2A. Protection: short circuit protection, overload protection, over temperature protection. Socket Pitch: AC: 2.54mm socket; DC: 2.54mm socket. Input: AC 100-240V 50/60Hz.

Output curret: 2A. 1x Power Converter. Output wire color : (+)Yellow, (-)Black. Output power:12W. Input wire color : (+)Red, (-)Black. No wiring reverse short-circuit protection for this device. Thin, small size, high efficiency and easy to install.

Output current: 25A. Internal circuit board is made with superior electronic components to ensure stable and high efficiency output. Aluminum alloy shell, waterproof and dustproof. 1 DC Converter.

DESC: SX460. 0.05%25 per deg. C change in AVR ambient. AVR response: 20 ms. Resistance: 15 ohms minimum. Current: Continuous 4 A dc. Filed current to 90%25: 80 ms. 1 x product Instructions.

1x 10 cells 36V 40A Balanceing Lithium Protection PCB. Short circuit protection: 40A±3A. Short circuit protection duration: 500MS. Balance current for single cell ≤ 55MA. Drill & Solar Battery. 1x 10pin cable.

Thermal drift 0.03%25 per centidegree change in AVR ambient. AVR R230 --------1Piece. Resistance min.15 ohm. Over Excitation Current Shutdown. Current continuous 8A. For use in 50/60 Hz Brushless Generators.

1 x 400W Boost Converter. Module properties: non-isolated step-up module (BOOST). Module size: 67mm X48mm X 28mm (LxWxH). Single module: 60g.

Output Type:direct output. Energized state while holding down the start / stop button, digital display 888, which is the factory setting. Apply For:6-60V MAX 80V battery. Setting Error We will solve any problem and do my best for you !

1 x Boost Module. Input:12V DC. Output:220V AC. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Upper limit working current: 8A. Internal resistance: less than 300mΩ. Effective life: more than 50,000 hours. Size: Show in the picture.

1Pcs step down converter volt regulator. Output ripple: 30mV (when no load). Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Working temperature: -40°C-+85°C.

Are you still looking for the button battery holder for your electronic product?. Here you won't have to worry about this problem, because we provide you with a full set of battery accessories. This button battery clip holder is included.

Install Aperture: M3 4. Chip: overheating, over-current, short circuit protection. Output current: 5-1500MA.

Module Size: 37mm(length) 25mm(width). Output current: 3A.

Upper limit working current: 8A. 2 series 7.4V lithium battery. · B is connected to the battery positive pole;. · B- is connected to the negative pole of the battery;. Short circuit protection: protection, disconnect load delay self-recovery.

Output power: 152W. 1 x 12V Step Up To 19V Power Converter 152W. Output current: 8A. Input instantaneous high pressure protection, output over-current protection, overheating protection chip. Waterproof, anti-shock protection, stable performance.

Input current:3A(maximum 5A). 1Pcs 5A DC-DC Step Up Power Module. Module type:Non-isolated boost. Module feature:XL6019 step up module. Load regulation:+-0.5%25. Output ripple:<100mV. Transfer efficiency:94%25(The highest)Normal efficiency for 85%25.

Output power: natural cooling 100W (MAX), strengthening cooling 150W (MAX) real power. 1 x 150W DC-DC Boost module(other accessories are not included). Conversion efficiency: 94%25 (when Input 19V 2.5A Output 16V, Reference).

<li> Features:</li>%0a<li> Automatic shut off. Protection against discharges.</li>%0a<li> Application Range: Storage Batteries; Lithium Batteries.</li>%0a<li> Battery overcharge and discharge protection module prolong battery life.</li>%0a<li> Stable and reliable performance.</li>%0a<li> </li>%0a<li> Specifications:</li>%0a<li> Materials: Metal, Plastic, Electric Parts</li>%0a<li> Control Accuracy: 0.1V</li>%0a<li> Power Consumption: </li>.

⭐ DC/DC Converter Regulator 24V Step Down to 12V For Boat Plotter etc ⭐UK⭐. A classic scenario for the use of this module would be for any system from 24v down to 12v to enable you to prevent a spike.

Disconnect protect : Yes.

Output current: Max 2A. We afford all cost if it's our fault.

Power supply with double iron silicon aluminum 4 1.2MM pure copper wire and rao. 100V/210A low resistance power MOS, high power and high current input, suitable for high power LED motorsHave input MOS meter protection, don't worry about input after burn out the power supplyWith over current protection and short circuit protectionThickening of the radiator and intelligent temperature control cooling fanConversion Efficiency: up to 95%25 (efficiency and input/output voltage, current, pressure related) Installation: 4pcs 3mm ScrewsInput Voltage: 8-60VInput Current: 20AQuiescent Current: 15mAOutput Voltage: 12-80V Continuous AdjustableOutput Current: 20A MAX. over 15A, please enhance heat dissipation (input and output pressure related, the greater the pressure, the.

Power indicator: Yes. Short circuit protection: Yes (limited current 8A). Over temperature protection: Yes (automatically turn off the output after over temperature).

1Pcs step down converter volt regulator. Output ripple: 30mV (when no load). Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Working temperature: -40°C-+85°C.

Hold 1 standard 9V battery. This battery holder with cover and switch, Can be used as a perfect external power source. Lead Wire Length: approx.150mm. If you do not receive our reply within 48 hours, pls.

1Pcs Step Down Converter. Output current:1.5A(min),2.2A(typ). Current output:1.5A. Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

1 x Boost Module. Input:12V DC. Output:220V AC. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Battery type: 3.7V ternary cell, lithium manganate cell, lithium cobalt cell. 1 Lithium Battery Protection Board. Adopt precision integrated circuit for fast and safe charging. This protection board is suitable for 13 series Li-ion cell.

Current Display Range: 0~12A. Output Power: 160W (160W need heat sink; 120W is for 8A). Support working status indicator. Anti-reverse protection, anti-backflow protection, short circuit protection.

Module Properties: non-isolated step-down module (BUCK) Input voltage: 4-38V Output voltage: 1.25-36V continuously adjustable Output current : 0-5A Over 3A, attached the heat sink.(recommended for use within 4.5A for long time use) Output power: recommended for use in below 75W Working temperature: -40 to +85 degrees Operating Frequency: 180KHz Conversion efficiency: up to 96%25 Load regulation: S (I) < 0.8%25 Voltage Regulation: S (u)< 0.8%25.

LED quantity: 38. Kits Fact Power: 2.4W.

You can also use it for USB-A extension cable, we use micro USB interface, this cable you can easily get. Is it not convenient?. Input: micro USB 5V.