RF Amplifiers & Microwave Amplifiers

Cases, Covers, Keyboard Folios. The RF input interface is SMA female head, and the detection output end is OUT. Detection slope: 18mV/dBm (typical value). Cell Phone Accessories. PC & Network Accessories.

Fully Tested, in Good Condition. Amplifier Research. Part Number See product details above for the specific warranty period of this item. Product Condition.

This is a 5--6000MHz RF signal power amplifier with 20dB gain. Amplifier Gain: 20dB. It is suitable for all types of fixed gain amplification of RF signal. 1 x RF Power Amplifier. Note: In use should follow the relevant principles of RF and microwave circuit layout.

1 x Amplifier. Frequency: 1090±15MHz (special for ADS-B reception). It is specially used for ADS-B receiver front-end RF amplification. Power Tools. The front end has high gain, low noise, and large dynamic range.

Frequency: 1090±15MHz (special for ADS-B reception). 1 x Amplifier. It is specially used for ADS-B receiver front-end RF amplification. Healthcare, Lab & Life Science. Phone Cases & Covers. The front end has high gain, low noise, and large dynamic range.

ENI / MKS MRI-2000. Linear Pulse Amplifier. 15 - 64 MHz RF. Frequency Coverage:15 - 64 MHz. Maximum Pulse Width :20 milliseconds. Pulse Droop: <0.5dB. (with 6 millisecond 2kW rectangular pulse). Maximum RF Input VSWR: <1.5:1 (50 ohm nominal).

It is specially used for ADS-B receiver front-end RF amplification. Frequency: 1090 ±15 MHz (special for ADS-B reception). 1 x Amplifier. The front end has high gain, low noise, and large dynamic range.

This is a 5--6000MHz RF signal power amplifier with 20dB gain. Amplifier Gain: 20dB. It is suitable for all types of fixed gain amplification of RF signal. 1 x RF Power Amplifier. Note: In use should follow the relevant principles of RF and microwave circuit layout.

It has a working frequency of 135---175MHz, 24dB gain, maximum output can be 100mV. Amplification Gain: 24dB. It is very suitable for amateur radio receiver front-end amplification use. 1 x Amplifier.

Features: This is a 5--6000MHz RF signal power amplifier with 20dB gain. It has big dynamic range and wide operating frequency range. The power supply voltage is 5VDC, and working current is 85mA. Maximum output power is  21dBm(100mW)@1dB compression point. It is suitable for all types of fixed gain amplification of RF signal. Specifications: Operating Frequency: 5--6000MHz.

250 Watts 500 to 1000MHz. L21-30P (Hubbel HBL2811) to AMPHENOL IND. 97-3106A-18-11S. 208VAC 3 phase (L21-30P). If we have it we will put it up on E-Bay for you with a B it N.

This is a 5--6000MHz RF signal power amplifier with 20dB gain. Amplifier Gain: 20dB. It is suitable for all types of fixed gain amplification of RF signal. 1 x RF Power Amplifier. PC & Network Accessories.

The RF input interface is SMA female head, and the detection output end is OUT. Healthcare, Lab & Life Science. Key Chains, Rings & Finders. Phone Cases & Covers. If you are satisfied with our service, pls.

This is a 5--6000MHz RF signal power amplifier with 20dB gain. Amplifier Gain: 20dB. It is suitable for all types of fixed gain amplification of RF signal. 1 x RF Power Amplifier. Note: In use should follow the relevant principles of RF and microwave circuit layout.

This is a 5--6000MHz RF signal power amplifier with 20dB gain. Amplifier Gain: 20dB. It is suitable for all types of fixed gain amplification of RF signal. 1 x RF Power Amplifier. suit & blazers. Note: In use should follow the relevant principles of RF and microwave circuit layout.

This is a 5--6000MHz RF signal power amplifier with 20dB gain. Amplifier Gain: 20dB. It is suitable for all types of fixed gain amplification of RF signal. 1 x RF Power Amplifier. Note: In use should follow the relevant principles of RF and microwave circuit layout.

This is a 5--6000MHz RF signal power amplifier with 20dB gain. Amplifier Gain: 20dB. It is suitable for all types of fixed gain amplification of RF signal. 1 x RF Power Amplifier. Video & Audio. Note: In use should follow the relevant principles of RF and microwave circuit layout.

This is a 5M-5GHz RF signal amplifier with 19dB gain. It is suitable for fixed gain amplification of radio frequency signal. 1 Amplifier. Bandwidth: 5M-5GHZ (gain will differ at different frequency, high gain flatness).

This is a 5--6000MHz RF signal power amplifier with 20dB gain. Amplifier Gain: 20dB. It is suitable for all types of fixed gain amplification of RF signal. 1 x RF Power Amplifier. Note: In use should follow the relevant principles of RF and microwave circuit layout.

Current: 750mA @ 24V. 140-1230 MHz 33-34dB Amplifier @ 24V/750mA 0.1W Output power with SMA Input & Output connector New! This amplifier coming with heatsing 100 X 78 mm. FQ working: Typical 140-1220 MHz.

The RF input interface is SMA female head, and the detection output end is OUT. Healthcare, Lab & Life Science. Apple MacBook Adapter. If you are satisfied with our service, pls. Input impedance: 50 Ω.

This is a 5M-5GHz RF signal amplifier with 19dB gain. It is suitable for fixed gain amplification of radio frequency signal. Bandwidth: 5M-5GHZ (gain will differ at different frequency, high gain flatness).

1 RF Power Amplifier. The Input Signal Size: Low frequency (0DBM / 1 mW), high frequency (2DBM). Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

LC Technology. Dual BTL Class-D audio amplifier. This module is ideally suited to adding a bit of amplification to your audio outputs. Pin pitch Left/Right channels. To minimise the noise added through the amplifier a clean power source should be used.

3, the maximum output amplitude: 33dbm (2W) in 6V work. 4, module size: 5 5CM. Note : it is without heat sink. If you encounter any trouble.

1 TA2024 Amplifier module. Pin pitch This module is ideally suited to adding a bit of amplification to your audio outputs. To minimise the noise added through the amplifier a clean power source should be used.

LC Technology PAM8302A 2.5W Mono Audio Amplifier Module kHz. LC Technology. Mono amplifier. This module is ideally suited to adding a bit of amplification to your audio outputs. To minimise the noise added through the amplifier a clean power source should be used.

LC Technology. Dual BTL Class-D audio amplifier. This module is ideally suited to adding a bit of amplification to your audio outputs. Pin pitch Left/Right channels. To minimise the noise added through the amplifier a clean power source should be used.

LC Technology. 20W (2x10W). Class-D audio amplifier. Pin pitch This module is ideally suited to adding a bit of amplification to your audio outputs. Left/Right channels. To minimise the noise added through the amplifier a clean power source should be used.

LC Technology. Draw Current This module is ideally suited to adding a bit of amplification to your audio outputs. To minimise the noise added through the amplifier a clean power source should be used.

ENI / MKS MR5K-DA-00052. Linear Pulse Amplifier. 2000 Watts 15 - 64 MHz. Frequency Coverage:15 - 64 MHz. Maximum Pulse Width:20 milliseconds. Rated Peak Bower Output:2000 W peak. RF Output Connector:Type N (F).

LC Technology. Class-D audio amplifier. Pin pitch This module is ideally suited to adding a bit of amplification to your audio outputs. Left/Right channels. To minimise the noise added through the amplifier a clean power source should be used.

5V 2 Channel 3W Speaker Driver Audio Amplifier Digital Analog. Pin pitch This module is ideally suited to adding a bit of amplification to your audio outputs. To minimise the noise added through the amplifier a clean power source should be used.

Its unique features and benefits include an impressive array of input/output and sample port options, cost effective power or bandwidth upgrades, unbeatable power density, built in-in protection and much more.

Funduino 5V 2 Channel 3W Speaker Driver EB-042 Audio Amplifier. This module is ideally suited to adding a bit of amplification to your audio outputs. Pin pitch To minimise the noise added through the amplifier a clean power source should be used.

LM386 200x Gain Amplifier Module Kit 5V 12V 3.5mm Mini Audio. Unsoldered kit. This is a kit that once complete provides a small audio amplifier. This is a DIY kit and as such will arrive unsoldered.

LC Technology LM386 200x Gain Amplifier Module AP-386-200. This module is suitable for amplifing a signal, be it audio or otherwise. 200x Multiplier gain. LC Technology. Pin pitch OUT Signal output.

LC Technology. BTL Audio power amplifier. This module is ideally suited to adding a bit of amplification to your audio outputs. Pin pitch To minimise the noise added through the amplifier a clean power source should be used.

3W Output power (3Ω Load, 2.5W:4Ω, 1.5W:8Ω). LC Technology. This module is ideally suited to adding a bit of amplification to your audio outputs. Draw Current Pin pitch To minimise the noise added through the amplifier a clean power source should be used.

14W (2x7W). LC Technology. Draw Current This module is ideally suited to adding a bit of amplification to your audio outputs. To minimise the noise added through the amplifier a clean power source should be used.

10W (2x5W). LC Technology. Pin pitch This module is ideally suited to adding a bit of amplification to your audio outputs. Left/Right channels. To minimise the noise added through the amplifier a clean power source should be used.

LC Technology. Low frequency amplifier. Pin pitch This module is ideally suited to adding a bit of amplification to your audio outputs. To minimise the noise added through the amplifier a clean power source should be used.

RF AMPLIFIER 8340B />A18 board for 8340B. HP Agilent 5086-7217. Physical conditions:Good. ITEM CONDITION. Tested,100% working condition. ENCLOSED ACCESSORIES. VIEW TECHNICAL SPECIFICATIONS ». TECHNICAL DETAILS.

LC Technology LM386 20x Gain Amplifier Module AP-386-20. This module is suitable for amplifing a signal, be it audio or otherwise. 20x Multiplier gain. LC Technology. Pin pitch OUT Signal output. GND Singal output.