Radio Communication Mounts

The most popular rugged base loaded CB antenna available on the market. Ah eavy duty CB mount designed to fit onto a horizontal arm of a mirror, roof racks and Bull bars. Whip 17.7 ph Stainless Steel.

Rubber boot. The coax is moulded into the 3/8 mount, which sits on top of the mag base. Fitting 3/8 UNF. Moulded Lead. made with love by. Add to Favourites. Suitable for any base loaded antenna up to about 1.6m (5ft) in length or smaller centre-load antenna.

We are proud to present our SIGMA 3/8 DV Base Mounting Kit. High Quality construction, designed to be fitted through a. The SIGMA 3/8 DV Base Mounting Kit is designed for use with 3/8 UNF Antennas. The cable is attached via a right angle 'N' Type connector.

Genuine Sirio DV to SO239 Roof mount with Cable. Ideal for Sirio CB Antenna or Dual band Amateur radio Aerial. Sirio mount kit. DV TO SO-239 COMPLETE ROOF STUD MOUNT KIT WITH SO239 FITTING AND CABLE. Fitting: SO239.

We are proud to present the SIGMA Large Washer Body Mount. High Quality construction, designed to be fitted through a small hole of a vehicle. The SIGMA 3/8 Large Washer Body Mount is designed for 3/8 UNF Antennas.

The SIGMA Gutter Mount is designed to be fitted to any vehicle with any roof gutter. Due to it’s High Quality Cast Iron construction. made with love by. Add to Favourites. Fitting 3/8 UNF.

TTi 555/550/560/565. Midland 203/210/38/98. CRT S-Mini. When using a din mount the speaker will be covered so you will need an external speaker! We will always help you to have a 100% positive happy buying experience.

A CB mount designed to fit onto a horizontal arm of a mirror, roof racks etc. The most popular rugged base loaded CB antenna available on the market. Whip 17.7 ph Stainless Steel. Flat Bar Mirror Mounting Kit With Black Mini Springer/Stinger.

3/8 DV type Truck Van Defender CB HAM Antenna Aerial Body Mount & Cable Kit. This mount lets you wing mount any 3/8 threaded CB or Ham radio aerial. 3/8 thread Powerstick dv mount. This mount gives a superior ground plane provided it is installed correctly.

Most popular way of mounting your aerial onto your vehicle. This Stud mount converts a 3/8 antenna to SO-239 (pl plug). Large Washer Stud Mount. We will always help you to have a 100% positive happy buying experience.

7" 3/8 THREAD TURBO MAGMOUNT SUPER STICKER FOR CB AND HAM AERIALS ANTENNAS. If this doesn't hold your aerial on the roof, then no single mag mount will! 7" Turbo Mag mount 3/8. This is our Super Sticker 7" 'Turbo Mag mount'.

7" Turbo Mag Mount. Very strong. Our most popular mag mount. Suitable for any base loaded antenna up to about 1.6m (5ft) in length or smaller centre-load antenna. Standard 3/8 thread. Rubber Pad on base.

1.5m Springer Whip (Orange or Red can be sent). Magnetic Vehicle Safety Flag Kit.

CB Large 7” Magnetic Mount with Black Stinger. The Stinger was developed by Sigma back in the early 90’s and still. The most popular rugged base loaded CB antenna available on the market. Whip 17.7 ph Stainless Steel.

Heavy duty right angle mirror or ROOF RACK mount with aprox 4m cable. This mount is the Stud Mount version and not with the snail mount so you CAN detach the cable if required. We will always help you to have a 100% positive happy buying experience.

A high quality 7" magnetic mount complete with full size magnet, rubber base,WITH NEW IMPROVED SO-239 fitting, 5m of cable with PL259 plug fitted. Ideal for most amateur radio and Sirio type large CB antennas.

SIRIO TYPE 3/8 DV BASE MOUNT FOR 3/8 FITTING ANTENNA CB AERIAL. Styled on the classic DV-27 angle mount only this version has a straight 3/8 connector. ideal mount for fire sticks or our springer aerials.

This is the Sturdy mount you see on the back on 9 out of 10 Defenders. We make the cable from HIGH QUALITY low loss RG58. We will always help you to have a 100% positive happy buying experience. Our product is tailor made for your vehicle.

7" SO-239 TURBO MAGMOUNT SUPER STICKER FOR CB AND HAM AERIALS ANTENNAS. If this doesn't hold your aerial on the roof, then no single mag mount will! This is our Super Sticker 7" 'Turbo Mag mount'. 7" Turbo Mag mount SO-239.

Sharman's Uni-mount. 3/8 Fitting.

MOONRAKER BOOT MOUNT KIT for SO239 mount ham/CB radio Aerial antenna Mount Kit. The MOONRAKER BOOT Mount is designed to be fitted to any vehicle with a boot. Due to it’s High Quality Cast Iron construction.

Harness is designed to connect two antennas to one CB Radio which will increase your output. Length to each mount from CB Radio is 9 Feet which is suitable for Tractors. RG59/A/U 75oms Twin Antenna cable.

Ground-plane mirror aerial mount Kit for Fibreglass Cabs. The Ground plane mirror mount was designed especially for fibre glass cabs or anywhere where it is difficult to get a good ground plane. It is a flat bar mirror mount with a ground plane antenna mounted underneath.

This is a Heavy duty 3/8th stud mount with 2 Large64mm stainless steel washers. or our Large washer stud mount Plated brass lower chassis. Plated brass coupling nut. We will always help you to have a 100% positive happy buying experience.

Gutter mount for 3/8 thread CB radio Aerial ideal For Land Rover Discovery or other 4X4 use. Gutter Mount Kit with 4m cable. We will always help you to have a 100% positive happy buying experience. All you need with love, Everything to make you smile ©.

MB-800 adjustable Hatchback / Boot mount for SO-239 cable. Our MB-800 Heavy Duty hatch / boot Mount. This boot mount takes one of our 3 (optional) so-239cables mainly used on amateur radio antennas such as the.

Popular style cast gutter mount which is taller than other gutter mounts to allow for greater clearance between the base and the top, allowing for especially long mounts to be fitted.

Large Hatchback or Boot / trunk Lip Mount. Our MB-400 Heavy Duty Boot Mount. This boot mount is designed to take one of our 3 (optional) so-239 cables mainly used on amateur radio antennas such as the.

Don't risk your valuable antenna on a cheapy magmount, its always worth investing a little more on a quality one. Powermag 125PL ! Fitting - SO239 socket. Complete with 3.6m of good quality RG58 cable.

Alinco DR-135 DX. Alinco DX-10. This is one in a range of different DIN mounting adapters we do which allows you to fit your CB radio neatly in to a car radio DIN slot for a professional looking installation.

To improve the radiation pattern. Fits between the antenna and mount.

Rubber boot. The coax has a new improved SO-239 lead which sits on top of the mag base. Fitting 3/8 UNF. Moulded Lead. Suitable for any small antennas up to about 0.90 cm in length. made with love by.

Danita 3000 multi. TTi 770 / 771. Intek M-790/795/799. Midland 78. This is one in a range of different DIN mounting adapters we do which allows you to fit your CB radio neatly in to a car radio DIN slot for a professional looking installation.

/ Antenna MCR COMMUNICATIONS. We are proud to present the MCR Large Washer Body Mount. High Quality construction. The MCR 3/8 Large Washer Body Mount is designed for 3/8 UNF Antennas. 3/8 Large Washer Body Mounting Kit CB Radio Aerial.

$Click here to see description.

Mount type is PL SO239. It can also be used as a body mount by drilling a hole in a suitable place on your vehicle.

This adaptor has been designed to adapt the factory fitted 5mm female mount on new style lorries i.e Scania New Gen to a 3/8 antenna fitting. This will allow you to fit a 3/8 antenna to mount such as springer/stinger, red thunder modulator and other 3/8 fitting antennas.

The new Volvo Trucks have a 7mm CB aerial stud whereas the old Volvo had the 6mm. This adaptor allows you to fit your old 3/8 aerial to your new truck. Sirio 7mm to 3/8 Volvo adaptor. We will always help you to have a 100% positive happy buying experience.

Deluxe Quality Quick Disconnect Bayonet. SW KD-1 DELUXE QUALITY QUICK DISCONNECT BAYONET. A short heavy duty disconnect bayonet with 2 locking pins, made for heavier antennae and longer life span.

This DIN Bracket allows you to fit a Cobra 19DX CB Radio to the DIN space in your Dashboard. Size of Space: 116mm x 45mm.

SO239 socket for antenna. SO239 socket for patch lead.