Signal Sources & Signal Conditioning Equipment

2/3/4 CORE ELECTRICAL FLEX CABLE TWIN TRIPLE WIRE LENGTH 0.75/1/1.5/2.5mm2 230V. - Low energy consumption and excellent efficiency (over 85%). - Ideal for use with electronic circuits, production line testing, electrical maintenance, ageing products, battery charging, DIY, labs, scientific research and teaching.

LCD display frequency and duty cycle, very clear, PWM output, can be set to the frequency and duty cycle. As adjustable pulse generator for MCU;. As square wave signal generator for motor driver;. Set the PWM frequency.

Adopt the Direct Digital Synthesizer(DDS) technology and provide stable, precise, pure and low distortion signals. Arbitrary Waveform. Waveform Length 8192 points 14bits. Carrier Waveform Sine, Square, Triangle, Ramp, Arbitrary Waveform (except DC).

Dual-channel function signal generator from this series is a multi-functional signal generator with high precision and high performance. It adopts large scale of FPGA integrated circuits, high-speed MCU microprocessor and with high precision oscillator as base in the inner circuit, which make the signals more stable.

Resolution: 1Hz. This functional signal generator can test many kinds of wave forms such as: sine, square, triangle, positive and negative sawtooth waveform. It is especially designed for those professional workers.

Compact structure and stable performance, suitable for phone or other electric device repair. It can buzzer alarm when load short circuit or over set current. Output Current Range: 2-5A. If you do not receive our reply within 48 hours, pls.

Flatness: +0.05dB 1Hz - 100kHz. Waveforms: Square, Sine & Triangle. Triangle Wave. 1 x Signal Generator DIY Kit. Distortion: Less than 1% (at 1KHz). Square Wave. Amplitude: 0-3V at 9V DC Input. Amplitude: 8V (no load) at 9V DC Input.

Frequency workable is 100MHz and Min. frequency workable is 0.01 Hz. Surface mounting technology improves interference immunity and operational life span. This design can solve inaccuracy problem of AC coupling.

Input Current(at 220VAC, full load). With replaceable fuse, convenient to change the protective tube. Load Regulation (10-100%). Output Current Range. You must check the load or increase the output current.

Compact structure and stable performance, suitable for phone or other electric device repair. It can buzzer alarm when load short circuit or over set current. Display Mode: LED, current is displayed to 4 bits.

This signal generator has characteristics of sine wave, and effective frequency response. Frequency range 10hz-1mhz is optional on thesignal generator panel. This signal generator device is easy to use due to vertical panel integration.

AD9850: 0-40MHz. Active AD9850 125MHz crystal oscillator modules. 1 x Signal Generator Module. 2 sine wave and 2 square wave output. Parallel and serial data input can be selected via a jumper. After the 20-30MHz frequency harmonics increases, the waveform will be less and less clean.

DDS signals: sine wave, square wave, sawtooth, reverse sawtooth, triangle wave, ECG wave and noise wave. Main AVR DDS V2.0 signal generator features - DDS signal with variable amplitude and offset.

Main chip: NE555. 1X NE555 Duty Cycle Adjustable Pulse Frequency Square Wave Signal Generator Module. An indicator LED illuminates on a low-level output and flashes relative to the output frequency. At higher frequencies, the LED will appear to be on solid and without a visible flash.

Input current (at 220VAC, full load): 0.6A. Current display accuracy: ±0.5%. Output current range: 0-10A. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.

The main output waveform : sine wave and square-wave, triangle wave, sawtooth wave. 1 x DDS Function Signal Generator. Sine wave: 1Hz-500KHz. Triangle wave: 1 Hz - 20KHz (the valid range). Sawtooth wave: 1 Hz ~ 20kHz (the valid range).

Including a circuit to limit output current which enables output current to be continuously adjustable from 2mA to 3A. Input Current: Max 3A. Output Current: 2mA-3A (continuously adjustable). Provide current limiting, LED display, over load and short circuit protection.

LCD display frequency and duty cycle, very clear, PWM output, can be set to the frequency and duty cycle. XXX (without decimal point): minimum unit is 1Hz, value range is 1Hz~999Hz. X.XX (the decimal point is in the hundred digit): minimum unit is 0.01kHz, value range is 1.00kHz~9.99kHz.

Collection in person from DE249DD if required. You should know full well who you are by now !

Vintage Regulated DC Power Supply With Short Circuit Protection. Condition is Used. Dispatched with Royal Mail 2nd Class.

ADF4351 combined with external loop filter and external reference frequency when using, it can realize the decimal N points frequency or integer N frequency and phase lock loop frequency synthesizer.

Venner Electronics Ltd. Wide Range Oscillator Audio. Audio Oscillator. Full working order. Clean used condition.

Maximum Output Current: 20mA. 1 x Signal Generator. Digital display digit 4 digit, Two decimal. Encoder Knob Rotate One Circle Has 20 pulses.

Waveform Characteristics Waveform length:2048 points. Waveform sampling rate:266MSa/s. Waveform vertical resolution:14bits. -Waveform Output. Pulse frequency range:0~6MHz. Square and Pulse:Overshoot (Square):≤5%;Duty-cycle range (Pulse):0.1%~99.9%.

IF YOU HAVE CO-SITED VHF GROUND STATION AND OGN FLARM OR UHF TV CLOSE-BY THIS WILL PROVIDE EXCELLENT REJECTION AND LOW INSERTION LOSS AT FLARM FREQUENCY. HIGH QUALITY, LOW LOSS: 868MHz 50 OHM, 3 POLE CERAMIC BAND-PASS FILTER UNIT WITH RIGHT ANGLE SMA CONNECTORS.

JUPITER 500. IEC Mains Lead & BNC to Croc Clip Lead.

1x VGA Signal Generator LCD Display Tester 7V-12V Power input. with Frequency switch and image switching button. Product information.

Good Condition.

Edu Lab 605-055. Complete with main lead & key.

Two Goodmans 0-12 dB Constant Impedance Attenuator. Condition is Used. Dispatched with eBay delivery – Packlink 2-3 days.

Output: 30V 5A 90W(Max. per channel. 3) DC 4.2-30V 100mA-6A wide range input and max. -Input Power: DC4.2-30V(2.7V after Start-up),100mA-6A. Output: anti-backflow, over temperature. -Protection Support.

Precise low-noise 25M differential crystal vibration is adopted, with higher common mode suppression ability and phase discrimination frequency. Reserve external clock interface. Programmable 1/2/4/8/16/32/64 crossover output.

A Japanese vacuum tube signal generator. Not sure if it functions still, but it worked perfectly when I bought it several years ago. Otherwise condition is very good for its age (see photos).