Tft Screen in LCD Display Modules

Supports any revision For Raspberry Pi (directly-pluggable). Compatible For Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions. The Pins that connect For raspberry pi must be correct. LCD Type: TFT. Size perfectly fits the Pi.

Ideal for the Arduino Card Module. Color: as shown in the photos.

Provide 12 examples for Arduino and 3 examples of STM32. 3.5in 480x320 TFT LCD screen, high quality image display and wide viewing angle. Screen Material: TFT. Equipped with SD card socket and SPI FLASH circuit.

Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.4″ diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)!

Resolution: 480x320. 1 x LCD Module. Support touch screen function. The colors may be a little difference for the different monitor display. Designed with a TF (Micro SD) card socket on the back of board so that you can conveniently insert a card.

Used for Raspberry Pi 3/2 or Computer display. Signal input: 2 AV + VGA + 1 channel HDMI high-definition reversing HDMI input: Version HDMI 1.2. 1 pcs x LCD Screen. Support image up and down left and right flip, image 4: 3/16: 9 display format conversion.

Nextion includes a hardware part (a series of TFT boards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring.

RAM (Byte). ARM7 48MHz. 5V90mA power consumption. Visual Area:36.72mm(L)×48.96mm(W). Easy 4 pin interface to any TTL Serial Host. 320 x 240 Resolution. WYSIWYG editor, designing a GUI is a piece of cake.

1 x LCD Module. Support touch screen function. The colors may be a little difference for the different monitor display. Designed with a TF (Micro SD) card socket on the back of board so that you can conveniently insert a card.

The Arduino code example below provides a simple test to get this TFT screen up and running. tft.init(240, 240); // Initialize ST7789. Arduino Pin. EXAMPLE ARDUINO CODE. Display Module. Module Size.

Compatible For Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions. Supports any revision For Raspberry Pi (directly-pluggable). The Pins that connect For raspberry pi must be correct. LCD Type: TFT. Resolution: 320 480 (Pixel).

1 3.5" LCD for Raspberry Pi. LCD Type: TFT. using the new version of the UI interface, the new UI;. 1 pen for 3.5 LCD Touch Screen. spi_speed is 32MHZ, fast speed;.

5" Inch Raspberry Pi LCD TFT Touch Screen HDMI Display 800x480 RetroPie Case. Condition is New. Dispatched with Royal Mail 1st Class.

3.5in TFT LCD Display Screen Compatible With LQ035NC111 54pin 320 240 Resolution. LQ035NC111 is a transmissive type color liquid crystal display(LCD) which uses amorphous thin film transistor(TFT) as switching devices.

Used for Raspberry Pi 3/2 or Computer display. Signal input: 2 AV + VGA + 1 channel HDMI high-definition reversing HDMI input: Version HDMI 1.2. 1 pcs x LCD Screen. Support image up and down left and right flip, image 4: 3/16: 9 display format conversion.

ELEGOO 3.5 Inch TFT LCD 480x320 Screen For Raspberry Pi 2, 3, 3+, 4. Condition is New. Dispatched with Royal Mail 2nd Class.%0a<br>%0a<br>Never used, still have original components it came with.

W/ All Technical Data in CD for Arduino UNO R3. AMAZING PRICE. 1pcs touch pen. With touch pen inside, you can use it more easily. - Ideal for Arduino Board Module. Free tutorial in CD, better price, better service.

TFT display interface: N/A. Expand: SD Card Socket, Touch Screen. Display Interface: Serial. Screen Type: Touch Screen. Due to the difference between different monitors, the pictures may not reflect the actual color of the item.

We are alwayswilling to work things out.

Used for Raspberry Pi 3/2 or Computer display. Signal input: 2 AV + VGA + 1 channel HDMI high-definition reversing HDMI input: Version HDMI 1.2. 1 pcs x LCD Screen. Support image up and down left and right flip, image 4: 3/16: 9 display format conversion.

Product type: Touch Screen for Raspberry Pi. 1 Touch Screen for Raspberry Pi. As a resistive touch screen for Raspbian/Ubuntu/Kodi/Win10 IOT. As a PC display screen for XP/win7/win8/win10 systems.

Touch Pen: length is 9cm;. 1 x Touch pen. - Touch screen type: resistive touchscreen. - Can use it directly to display characters, graphics and BMP format images with the help of Micro SD card adapter module.

Burn your own image file to the SD card and start Raspberry Pi. Connect the LCD screen to the Raspberry Pi. LCD Type : TFT Transmissive ---. TFT features Interface Define.

A HDMI cable is needed for Raspberry Pi 1B. Product type: Touch Screen for Raspberry Pi. 1 Touch Screen for Raspberry Pi. I/O is needed if for touching. LCD type: TFT. LCD port: GPIO. Touch type: Resistive touchscreen.

<li> Features:</li>%0a<li> %0a <ul> %0a <li> 3.5inch TFT LCD Module, Resolution 480x320, Controller ili9481 ili9468, ili9488 hx8357, or r61581.</li> %0a <li> </li> %0a <li> Designed with a TF(Micro SD) card socket on the back of board so that you can conveniently insert a card.</li> %0a <li> </li> %0a <li>Support touch screen function.</li> %0a <li>The test code is provided below.</li> %0a <li>This kit requires certain professional knowledge and ability, make sure you know how to use it, please. We cannot provide any technical assistance.</li> %0a </ul> </li>%0a<li>Specifications:</li>%0a<li>Controller: ili9481 ili9468, ili9488 hx8357, or r61581</li>%0a<li>Resolution: 480x320</li>%0a<li>Voltage: 5V/3.3V</li>%0a<li>LCD Interface Definitions:</li>.

Supports any revision of Raspberry Pi (directly-pluggable). Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions. Size perfectly fits the Pi. LCD Type: TFT. The Pins that connect the raspberry pie must be correct.

1 3.5" LCD for Raspberry Pi. LCD Type: TFT. using the new version of the UI interface, the new UI;. 1 pen for 3.5 LCD Touch Screen. spi_speed is 32MHZ, fast speed;.

Screen type: TFT. Module size: 89.92(W) 54.25(L) mm.

Resolution: 480x320. LCD Interface Definitions 1 x 3.5" TFT LCD Display Module. Support touch screen function. Cell phone accessories. Designed with a TF(Micro SD) card socket on the back of board so that you can conveniently insert a card.

Designed for Raspberry Pi Model B/B+, an ideal alternative solution for HDMI monitor. LCD Interface SPI. LCD Type TFT. Resolution 320 480 (Pixel). 320×480 resolution. Touch Screen Type Resistive. Play videos (supports multi formats, MP4 and so on).

Communication interface: USART serial interface. 1x LCD Display Module. Interface level: 3.3V CMOS (5V compatible). FLASH space: 4MB. 100 backlight dimming,sleep mode,sleep current 20MA,support for touch wake-up function.

It is the best solution to replace the traditional LCD and LED Nixie tube. TFT Screen with integrated 4-wire Resistive Touch Panel. Easy 4 pin interface to any TTL Serial Host. On board micro-SD card for firmware upgrade.

It can be used in any embedded systems which require display high quality colorful image. This LCD has a superior display quality and super wide viewing angle. LCD Type: TFT Transmissive Normal White.

Used for Raspberry Pi 3/2 or Computer display. Signal input: 2 AV + VGA + 1 channel HDMI high-definition reversing HDMI input: Version HDMI 1.2. 1 pcs x LCD Screen. Support image up and down left and right flip, image 4: 3/16: 9 display format conversion.

Support all raspberry board except PI zero(PI A,PI B need use I2C on gpio). Only Use DSI interface Connects to the Raspberry Pi board include power. As due to raspberry pi system that lead to inaccuracy of touching point, it may caused the border screen icon to be no function while touching it.

With GPRS module, you can design your Arduino phone. - Touch Pen: length is 9cm;. 1 x Touch pen. - Touch screen type: resistive touchscreen. We guaranty the item will be well treated and protected.

Compatible For Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+versions. Supports any revision For Raspberry Pi (directly-pluggable). The Pins that connect For raspberry pi must be correct. Size perfectly fits the Pi.

Display Manufacturer Innolux 4.3” TFT. Touch Panel Type Resistive. Display Brightness (cd/m2) 400 (typ.)., with touch. USB Port Yes. Processor 16/32 bit CISC. Vertical Viewing Angle (degrees) 50 (Top) 70 (Bottom) (typ.).

Resolution: 800x480. - Compatible and can be plugged directly into any version of Raspberry Pi (only except the first generation Pi model B which requires an HDMI cable.). - Support any Raspberry Pi Image, Ubuntu, LinuxMint, Win 10 IOT and any more.