gas flow meter

<li> Description:</li>%0a<li> </li>%0a<li>Flowmeter Tester scaled from 0-25 litres per minute in one litre graduations used for testing the gas flow at the Mig or Tig torch simply place the tester over the mig or tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases</li>%0a<li>Disable the HF on TIG welders or you may get a shock</li>%0a<li>Release the Mig wire tensioner to stop the wire feeding when testing</li>%0a<li>Designed to check gas flow on TIG or MIG torches</li>%0a<li>Simply place the tester over the MIG or TIG gas nozzle & the gas flow is measured from the top of the ball, can be used for all gases</li>%0a<li>Size: Approx. 13.7x3.7x3.7cm/ 5.39x1.46x1.46"</li>%0a<li> </li>%0a<li>Package:</li>%0a<li> </li>.

Barb connector: approx.7mm. Pressure: 0.15MPA. Color: clear & gold. Temperature: 20 ℃.

0 - 40 LPM. • Gas Type Argon. • Ideal for use in MIG and TIG. We are an established, professional, family run tool distributor and we really appreciate your custom!

Release the Mig wire tensioner to stop the wire feeding when testing.

GIVES YOU A BETTER LITRES PER MINUTE GAUGE OF YOUR WELDING GAS FLOW. GREAT VALUE AND BUILD QUALITY.

Applicable for many kinds of gases, such as CO2, argon, etc. Reduces and controls the pressure of gases for Welding work. Adopts piston decompression method, gas of high pressure enters into the regulator and then low pressure released. Could expediently see numerical values of the SCFH of carbon dioxide or argon from the transparent tube. The outlet fit either the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 1/4" barbed fitting. The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube, so this flow meter will handle MIG and TIG welding both steel and aluminum. If you have a Miller, Lincoln, .

Dual scale gauge with unbreakable poly carbonate lens for durability. Poly carbonate flow tube and outer cover are impact resistant for maximum durability. Made of high quality PC and copper, sturdy and durable in use.

<li> Description:</li>%0a<li> </li>%0a<li>Flowmeter Tester scaled from 0-25 litres per minute in one litre graduations used for testing the gas flow at the Mig or Tig torch simply place the tester over the mig or tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases</li>%0a<li>Disable the HF on TIG welders or you may get a shock</li>%0a<li>Release the Mig wire tensioner to stop the wire feeding when testing</li>%0a<li>Designed to check gas flow on TIG or MIG torches</li>%0a<li>Simply place the tester over the MIG or TIG gas nozzle & the gas flow is measured from the top of the ball, can be used for all gases</li>%0a<li>Size: Approx. 13.7x3.7x3.7cm/ 5.39x1.46x1.46"</li>%0a<li> </li>%0a<li>Package:</li>%0a<li> </li>.

The dial has a transparent film to prevent the dial from scratching the numbers. In addition to the two pressure gauges, the rest of the pressure reducing valve is made of copper. Prevent leaks. With plexiglass dial, the numbers are clearly visible and durable.

Applicable Gas:Argon gas. Easy reading pressure gauge. Poly-carbonate flow tube and outer cover are impact resistant for maximum durability. Rated flow rate 0-200 (m. External safety pressure relief design. ).

Suitable Gas: Argon. Pressure regulator turns high pressure gas into low pressure gas, and keep the output gas pressure and flow rate stable. Compact structure, pressure gauge and high pressure gauge are made of high quality material, overall compact structure, perfect, good sealing.

Applicable Gas:Argon gas. -Pressure gauge for easy reading. Gauge Specification:25mpa. Flow rate:25 l/h. -Polycarbonate flow tube and outer cover are impact resistant for maximum durability. Input Pressure:15mpa.

Glad to deal with you in the future. Thread size:14 1.5mm. Color: Clear & gold & blue. We will try our best to solve the problem. DSR scores is very important for us. - Easy installation, simple operation.

Suitable Gas: Argon. Pressure regulator turns high pressure gas into low pressure gas, and keep the output gas pressure and flow rate stable. Compact structure, pressure gauge and high pressure gauge are made of high quality material, overall compact structure, perfect, good sealing.

Suitable Gas: Argon. Pressure regulator turns high pressure gas into low pressure gas, and keep the output gas pressure and flow rate stable. Compact structure, pressure gauge and high pressure gauge are made of high quality material, overall compact structure, perfect, good sealing.

Suitable Gas: Argon. Pressure regulator turns high pressure gas into low pressure gas, and keep the output gas pressure and flow rate stable. Compact structure, pressure gauge and high pressure gauge are made of high quality material, overall compact structure, perfect, good sealing.

Description:                            Flowmeter Tester scaled from 0-25 litres per minute in one litre graduations used for testing the gas flow at the Mig or Tig torch simply place the tester over the mig or tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gasesDisable the HF on TIG welders or you may get a shockRelease the Mig wire tensioner to stop the wire feeding when testingDesigned to check gas flow on TIG or MIG torchesSimply place the tester over the MIG or TIG gas nozzle & the gas flow is measured from the top of the ball, can be used for all gasesSize: Approx. 13.7x3.7x3.7cm/ 5.39x1.46x1.46" Included in the Package:&n.

Applicable Gas:Argon gas. Rated outlet pressure 0-25 (MPa). Easy reading pressure gauge. Poly-carbonate flow tube and outer cover are impact resistant for maximum durability. Rated flow rate 0-200 (m. ).

Designed to check gas flow on TIG or MIG torches. Release the Mig wire tensioner to stop the wire feeding when testing. Disable the HF on TIG welders or you may get a shock. Size: Approx. 13.7x3.7x3.7cm/ 5.39x1.46x1.46".

Description:                            Flowmeter Tester scaled from 0-25 litres per minute in one litre graduations used for testing the gas flow at the Mig or Tig torch simply place the tester over the mig or tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gasesDisable the HF on TIG welders or you may get a shockRelease the Mig wire tensioner to stop the wire feeding when testingDesigned to check gas flow on TIG or MIG torchesSimply place the tester over the MIG or TIG gas nozzle & the gas flow is measured from the top of the ball, can be used for all gasesSize: Approx. 13.7x3.7x3.7cm/ 5.39x1.46x1.46" Included in the Package:&n.