ultrasonic transducer

We reserve the right to void any warranty where this part is not used in its intended circumstance. WARNING! Ultrasonic Transducer 40KHz for use with either our Stainless Steel or Industrial XL range of tanks.

We reserve the right to void any warranty where this part is not used in its intended circumstance. WARNING! 100 watt transducer assembly - for use with Allendale 40kHz transducers. 100W 40KHZ ultrasonic transducer generator driver.

New Piezoelectric Ceramic 60W 40KHz Ultrasonic Transducer with the spot weld stud.

We reserve the right to void any warranty where this part is not used in its intended circumstance. WARNING! 50 watt transducer assembly - for use with Allendale 40kHz transducers. 50W 40KHZ ultrasonic transducer generator driver.

Quiescent Capacitance:1700+/-15%PF.

(4, the product uses a waterproof ultrasonic probe to prevent probe failure caused by water and dust. 1) using IO port TRIG trigger location, to the high level signal at least 10us. 5, the module has a variety of mode selection.

Static capacitance (pF): 8500 ± 10%. Frequency and static capacitance strong consistency. Power (W): 35w. 1 x Ultrasonic electric ceramic sheet CA. Insulation resistance (2500V DC): ≥ 100MΩ. Resonant impedance is low.

40KHZ ULTRASONIC TRANSDUCERS. Manufactured by Murata as their part numbers MA40S3R (receiver) and MA40S3S (transmitter) these are miniature optimised 40Khz piezo electronic transducers. These are supplied as a pair, the receiver is marked with an 'R' on the underside and the transmitter is marked with an 'S'.

Frequency: 28KHZ. Ultrasonic cleaning transducer Cleaner. Transducer Power: 60 W. 1 X Transducer. Driver Board Power: 100W. 1 X Driver Board. Board radiating surface. homogeneous sounding board.

Pendulum：50W 40KHZ. Circuit board and vibration head (ceramic transducer) Wiring instructions Power Board：220V 100W. Vibration head or transducer ceramic glue application head shock stick firmly to the pelvic floor cleaning;.

We reserve the right to void any warranty where this part is not used in its intended circumstance. WARNING! 28kHz Transducer for XL Series Tanks. 60W 28KHz piezo-ceramic ultrasonic transducer with M10x1.0mm fixing thread, 10mm depth.

Resonant frequency: 108KHz. Ultrasonic Mist Maker Atomizing Transducer Ceramic. D16mm 113KHz Ultrasonic Mist Maker Atomizing Transducer Ceramic Humidifier. Static capacitance: 1700±5%pF. 16mm 113KHz. Coupling factor: > 52%.

Static capacitance (pF): 8500 ± 10%. Frequency and static capacitance strong consistency. Power (W): 35w. 1 x Ultrasonic electric ceramic sheet. Insulation resistance (2500V DC): ≥ 100MΩ. hope you could understand.

40 KHz Strengthened transducer makes the ultrasonic more powerful. 1x Ultrasonic Cleaner. - 3L capacity tank for professional cleaning. - Ultrasonic Frequency:40 KHz. Watch Box & Wearable Devices.

(1) using IO port TRIG trigger location, to the high level signal of at least 10us;. Module size: 41mm 28.5mm. Farthest distance: 4.5m. 1, Horizontal distance;. So constantly cycle test, that can achieve.

40 KHz Strengthened transducer makes the ultrasonic more powerful. 1x Ultrasonic Cleaner. - Ultrasonic Frequency:40 KHz. - 3L capacity tank for professional cleaning. Watch Box & Wearable Devices.

40 KHz Strengthened transducer makes the ultrasonic more powerful. - Heating function with 0—80 Celsius adjustable temperature. - Temperature Setting:0—80 Celsius Adjutable. - 3L capacity tank for professional cleaning.

Using IO port TRIG trigger location, to the high level signal of at least 10us;. Easy to use. Long service life. Probe Frequency: 40KHZ. Resolution: 1mm. GND (negative). Basic Working Principle Working Current: <8mA.

40 KHz Strengthened transducer makes the ultrasonic more powerful. 1x Ultrasonic Cleaner. - Ultrasonic Frequency:40 KHz. - 6L capacity tank for professional cleaning. Watch Box & Wearable Devices.

1 x Arduino Ultrasonic Module HC-SR04 Distance Sensor. Input trigger signal: 10us TTL impulse. Sensor angle: Not more than 15 degrees. Detection distance: 2cm-450cm. Ending Soon. Mode of connection.

We reserve the right to void any warranty where this part is not used in its intended circumstance. WARNING! 50W / 110V / 40KHZ ultrasonic transducer generator driver. 50 watt transducer assembly - for use with Allendale 40kHz transducers.

40 KHz Strengthened transducer makes the ultrasonic more powerful. - Heating function with 0—80 Celsius adjustable temperature. - Temperature Setting:0—80 Celsius Adjutable. - Ultrasonic Frequency:40 KHz.

<li> 100% Brand new , never used </li> <li>Item's color might be different from the picture because of the aberration.</li> <li>Pls Note: This product can not be used directly ,it need 100V-220V transformer, output voltage is 24V.</li> <li>Notice: This item is only a Mist maker, is not equipped with power supply. Power supply need to be purchased separately.</li> <li>Feature:</li> <li>Easy to operate, long service life, self-protection.</li> <li>No heat or chemicals used.</li> <li>Add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology.</li> <li>Ideal for indoor or outdoor fountains, water feature, and office use.</li> <li>Voltage: DC 24V</li> <li>Power: 20W±1W</li>.

(4, the product uses a waterproof ultrasonic probe to prevent probe failure caused by water and dust. 1) using IO port TRIG trigger location, to the high level signal at least 10us. 5, the module has a variety of mode selection.