Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Clutch Springs
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Clutch Springs
works great . great Barnett coil spring conversion kit for road star, install is pretty simple. USE IN. POUND torque wrench not foot lb. converted or break posts (according to the stories I read from others. Clutch feels stronger, Pull is a little harder, but not bad. no slipping. clutch release point on lever is better too. Scraping off the old gasket is probably the hardest part of the install
Verified purchase: Yes | Condition: New
Have no problem with quality,but having problems with it working properly. Intalled it twice and it fails to work. Ive followed instructions from youtube video and written instructions online. I checked model numbers on barretts web site and was told this was not the right part for my bike while several other sites said it was the right part...so im not gonna to install it for the 3rd time till thats settled.
Verified purchase: Yes | Condition: New
fixed the slipping problems under heavy acceleration. Factory yamaha spring washer was untempered even after replacing clutches it slipped very bad over 1/4 throttle. i recommend this i got it for like 120 vice 140. whole different motorcyle. 2001 Yamaha road-star silverado 1600. the speedo just climbs and climbs better clutch handle feel and more torque to the ground. Just by this and send it. You will not be sorry. Its a shame you cant see the nice color it behind the clutch cover. The springs are just fine dont need to buy extra heavy duty ones. This modification replaces the stock spring washer with the proper clutch plate and heavy duty springs. just bought a 1999 yamaha royal star venture with 9k miles and the clutch slips bad have a barnett on the way i think its the same one. Will be doing clutches and this mod very soon. This bike also slips at 1/4 throttle.Read full review
Verified purchase: Yes | Condition: New
Easy install, fixes the weak clutch problem on these Yamaha bikes. No more revving on uphills or throttling through traffic. I installed the clutch also but really do not think my bike needed it as the clutch that took out looked great. The large round spring and hub from the factory are a terrible design and this makes it great. Would do again on another bike for sure!
Verified purchase: Yes | Condition: New
This Barnett spring pressure plate upgrade mounted easily with their easy to follow instructions. Put it on my previous Vmax and shifted perfectly and eliminated the slippage I had at higher rpm’s in top gear. Thanks
Verified purchase: Yes | Condition: New
This is perfect, wish I had done this first.. Super easy to install. Made a huge difference in the way my Royal Star Midnight Venture, does burn out. Thanks for a great product..
Verified purchase: Yes | Condition: New
Well crafted, instant difference. For the first time I felt like my bike had the clutch it needed all along. I did the full conversion. Clutch plate and disks and steels.
Verified purchase: Yes | Condition: New
This place is the best because they have qualified staff who knows what they're doing and got me my parts on time recommend them to anybody definitely use them again thank you
Verified purchase: Yes | Condition: New
Installed in my 2006 Yamaha Venture--not hard at all, make sure you use a inch/pound torque wrench- that's very critical.After replacing found shifting a lot more positive, seems to grab a lot better, friction zone is where it should be on the clutch lever. I really don't notice it taking more hand effort like some have said. Make sure you get 100% of the old clutch cover gasket off -And buy a new gasket before starting the project !
second Barnett pressure plate i have installed on 2 different bikes. highly recommend this on Yamaha royal stars. its just a shame you have to cover it up nice color...lol
Verified purchase: Yes | Condition: New