Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Amplifiers & Pre-Amps
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Amplifiers & Pre-Amps
I am very pleased with this headphone amplifier. Sound quality is good, and it allows the selection of a master mix, an individual (auxiliary) mix, or a blend of the two via the balance control on each of the four channels. The only downside is the the individual auxiliary inputs are unbalanced stereo 1/4 inch jacks, so if you have balanced 1/4 inch aux outputs from your mixer you will need to make up a special cable with a mono (1/4 inch TR) plug on the mixer end, and a stereo (1/4 inch TRS) plug on the headset amp end with the tip and ring connected together. Or, if you want to run stereo into the aux input, you will need a y cable with a stereo (1/4 inch TRS) plug on the headset amp end that splits out to two mono (1/4 inch TR) plugs going to two aux outputs on your mixer. This type of cable is just like an effects "insert" cable available at any retail or online music store. The main or master input to the headset amplifier IS balanced left and right, so so you can use either 1/4 inch TRS cables from the control room output of your mixer, or XLR cables from your mixer's main outputs. Either way, this headset amplifier offers plenty of flexibility at half the price of comparable units from other manufacturers. If you need more than 4 individual headset mixes, you can add another unit and daisy-chain them together via the pass-through XLR connectors.Read full review
4-channel with an In-N-Out on the face is excellent.the new one has 6 channels with only one out don't particularly care for it.they don't make the 4-channel any longer you have to go to the 6 but I have someone who just rebuilt at 470Ochannel for me and it absolutely marvelous.
Verified purchase: Yes | Condition: Pre-owned
Beautifully conceived and executed! Not only is it gorgeous, its incredibly sophisticated. Separate controls - including EQ for each headphone channel. High output with no distortion - or background noise. With no signal, its silent. Cool light show as well with all four and master cranked up. This one runs circles around the one it replaces! Apparently, there's nothing they didn't think of. I've been a studio engineer for over 30 years and this is the best HP amp I've ever used - at any price, but his one is relatively cheap - I should say inexpensive. Nothing cheap about it! Jim Bach
Verified purchase: Yes | Condition: New
Can't beat it for the price and quality of the product. 4 separate headphone outputs each adjustable to their desired settings.
Verified purchase: Yes | Condition: Pre-owned
I use this headphone amp and it works excellently. I also discovered that i can actually get a total of 12 outputs from it. Wonderfull!!. Now i run one of my studio monitor pair from one of this outputs and it works perfectly. The Audio quality is excellent as well, particularly that each output has its dedicated high and low EQs.