Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in Switch Power Supplies
The Positive: The fans are quiet and the power switch is helpful for when silence is required. The fact that there is a removable power cord is really convenient as i find that removing fans is the best way to get into the rack quickly. So removing the power cord from the device is a great value add. The Negative: The piece is not standard width or height! I DID get the fans mounted into my rack, it WILL work if your rack is perfect, but there is NO wiggle room. The holes BARELY fit over the threaded holes in my rack. And i know my rack is standard. it is a Middle Atlantic fabricated cabinet. There is no way i could have screwed up the hole width, i didn't make it. They did. The Height is not correct either. It is a little over 2U High. I guess you could call it 2.5 U high. I guess if i wanted to mount a second set then they would take up 5U instead of 6U. Yay..... Now i am forced to rip a custom blank to go above the fans. If i was not planning on a blank there, they i would have no choice but to have a 1/2U gap. Poor. Summary: I will use them, but i would NOT buy another set.Read full review
Verified purchase: Yes | Condition: New
The build quality is good, with the fans able to push a lot of air at a reasonably quiet noise level. Those are the good points. First of all the fan is set up to pull the air (exhaust) instead of intake, even though it's not described as such. Another little annoyance was being described as mounting screws were included, which they weren't. Grr. The big issues are these do not adhere to standard rack case dimensions. The mounting holes are not wide enough to fit in a standard rack case without drilling or filing them out, and it's over two rack spaces, so you will need at least a 3u rack space area for this to fit. It's about 2.5 rack spaces, so there will be a gap... This design is definitely not set up for pro audio systems. There are plenty of quality systems out there, as always you get what you pay for. I'd pass on this if you have the chance.Read full review
Verified purchase: Yes | Condition: New
The "engineers" that designed this need to trade in the abacus for a computer with CAD and remember to not turn off the range checking. A high school kid in drafting class would have designed the mounting plate better. First the hole width is NOT going to fit a standard 19" rack. Next up this is DEFINITELY NOT a 2U appliance. a 2U is 3.5" this fan set is nearly FIVE inches tall. As far as fan noise goes, I can only guess that previous reviewers use this fan array in in a noisy location because the three fans are very noisy. Luckily I mounted this one in the BACK of my 4U rack so vertical and horizontal fit wasn't anything a dremel couldn't cure. Look elsewhere for a rack cooling solution... I "should" have known better, "Pyle" has a deserved bad reputation, this one is no better than other junk they put out. If it weren't so much hassle to return it and find another I would but I hope I can save some of you the trouble.Read full review
Verified purchase: Yes | Condition: Pre-owned
The amount of air flow is slight, but massive forced air is not required to keep electronic components cool. Air circulation is all that's necessary. This fan is quiet and does what it's intended. Other reviews indicate this fan has a high failure rate. Time will tell.
Verified purchase: Yes | Condition: New
Excellent product and excelent quality. Perfect condition and good value
Verified purchase: Yes | Condition: New