Tool seems to be OK. First one i have bought of this type ever. Thought the hold down bolt was no good but a thread chaser fixed that. There was a burr in the threads so it didn't feel like it was working right. Fixed it and now works fine
Verified purchase: Yes | Condition: New
I am using this OXA sized QCTP on Unimat DB lathe with 10 mm tools. Ok, it's not suited for this size, so some modification had to be made: the bolt needed is M6×65, s oyou need proper spacers to accomodate it. The lathe center is quite low, so I can use QCTP on the side of the top slider, using longer M5 riser bolts, as the stock ones are too short to lower the toolpost to the desired position. The biggest problem was the undersize hole for the boring bar, measuring c.a. 9.8 mm instead of 10.0. Now is is fine, after reaming. The parting blade holder is useless for now, as I could not fing the proper blade to fit. The toolset I've bought has parting / grooving holder of 10×10 mm shank. It's a good value for money, just need to keep you tools short and tight. Tool holders are slightly loosy whem mounted on the toolpost, at least in the item I have. And they are SOFT: do not use excess power when mounting or cutting.Read full review
Verified purchase: Yes | Condition: New
Cheap, simple but seems and feel good quality. Good value for the money.
Verified purchase: Yes | Condition: New
It is a good product
Verified purchase: Yes | Condition: New
works good on my lathe
Verified purchase: Yes | Condition: New