Picture 1 of 1

Have one to sell?

Glowworm 24CXI 30CXI 38CXI Diverter Valve Repair Kit 2000801903 Was 801903

(9355)

£14.99

Condition:

Quantity:

6 available / 4 sold

Breathe easy. Returns accepted.

Postage:

May not post to United States. Read item description or contact seller for postage options. See detailsfor postage

Located in: rotherham, South Yorkshire, United Kingdom

Delivery:

Varies

Returns:

14 days return. Buyer pays for return postage. See details- for more information about returns

Payments:

Get more time to pay. See payment informationfor PayPal Credit - opens in a new window or tab

Shop with confidence

eBay Money Back Guarantee

Get the item you ordered or your money back. Learn moreeBay Money Back Guarantee - opens new window or tab

Report this item - opens in new window or tab

Seller assumes all responsibility for this listing.

eBay item number:232663374956

Last updated on 10 Apr, 2024 13:44:39 BSTView all revisionsView all revisions

Item specifics

Condition: New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging ...

Type: Storage Tank Water Heater

Brand: Glowworm

MPN: 2000801903

EAN: Does not apply

Item description from the seller

Business seller information

Pipeline Plumbing & Heating

Shazad Rahim

48 Hall Crescent

Rotherham

South Yorkshire

S60 3LQ

United Kingdom

Show contact information

:enohP40815676970

:liamEku.oc.liamtoh@daz45hs

I certify that all my selling activities will comply with all EU laws and regulations.

Seller assumes all responsibility for this listing.

eBay item number:232663374956

Last updated on 10 Apr, 2024 13:44:39 BSTView all revisionsView all revisions

Post to me

The seller has not specified a postage method to United States. Contact the seller and request postage to your location.

Item location:

rotherham, South Yorkshire, United Kingdom

Posts to:

United Kingdom

Excludes:

Afghanistan, Libya, Nauru, Russian Federation, Somalia, Ukraine, Yemen

Dispatch time

Will usually dispatch within 1 working day of receiving cleared payment.

Taxes

Taxes may be applicable at checkout. Learn moreLearn more about paying tax on eBay purchases.

Returns policy

After receiving the item, cancel the purchase within	Return postage
14 days	Buyer pays for return postage

Refer to eBay return policyopens in a new tab or window for more details. You're covered by the eBay Money Back Guaranteeopens in a new tab or window if you receive an item that is not as described in the listing.

The buyer is responsible for return postage costs.

Return policy details
Returns accepted

Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. Find out more about your rights as a buyer and exceptions.

Payment details

Payment methods

Accepted, Eligibility for PayPal Credit is determined at checkout.

Representative example

Purchase rate p.a. (variable)

23.9%

Representative APR (variable)

23.9% APR

Assumed credit limit

£1,200

eBay (UK) Limited is an appointed representative of eBay Commerce UK Ltd (of Hotham House, 1 Heron Sq, Richmond upon Thames, Greater London, TW9 1EJ) which is authorised and regulated by the Financial Conduct Authority (with firm reference number 968972). eBay (UK) Limited acts as a credit broker not a lender. eBay (UK) Limited may receive commission if your application for credit is successful, the commission does not affect the amount you will pay under your agreement. Eligibility for PayPal Credit is determined at checkout. Terms and conditions apply. Credit subject to status, UK residents only.

Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH). To access our initial disclosure document, please click hereLearn more about Product Partnerships Limited - opens in a new window or tab.

See terms for PayPal Credit - opens in a new window or tab

sh54zad

100% positive Feedback

21K items sold

Seller's other items Contact

Joined Jun 2007

Detailed seller ratings

Average for the last 12 months

Accurate description

5.0

Reasonable postage cost

5.0

Delivery time

4.8

Communication

4.9

Registered as a business seller

Seller Feedback (9,471)

5***n (2298)- Feedback left by buyer.

Past month

Verified purchase

As described good value and delivery thanks very much

Worcester 24CDI, 28CDI, 35CDI Heat Exchanger O'Ring Washer Gasket Pack CDIWK1 (#333488749563)

l***l (755)- Feedback left by buyer.

Past 6 months

Verified purchase

Fast delivery, item as described, seller recommended A⭐⭐⭐⭐⭐

Worcester 24CDI, 28CDI, 35CDI Heat Exchanger O Ring Washer Pack fits 87161429000 (#333082385154)

l***a (470)- Feedback left by buyer.

Past 6 months

Verified purchase

Great service Thank you

Worcester 24CDI, 28CDI, 35CDI Heat Exchanger O'Ring Washer Gasket Pack CDIWK1 (#232669665305)

See all Feedback

Product ratings and reviews

Learn more

Write a review

3.9

17 product ratings

10 users rated this 5 out of 5 stars
2 users rated this 4 out of 5 stars
1 users rated this 3 out of 5 stars
1 users rated this 2 out of 5 stars
3 users rated this 1 out of 5 stars

Would recommend

Good value

Good quality

Most relevant reviews

See all 16 reviews

by rodlizmusic
09 Jan, 2020Most critical review
Make sure you get the right kit!
You need to be careful to get the right kit. There are two different and non-interchangeable kits being sold by different sellers under the same 801903 part number. Assuming that they are both kits that fit this range of boilers, I guess that there must have been a change during the production run of the boilers. Type 1 has "O" rings on the brass plugs just under the head and a longer spindle on the "blunt" (non- "O" ring) end of the bobbin. Type 2 has "O" rings further down the brass plug and a shorter spindle on the blunt end of the bobbin. (See the photos - I had to get another kit that matched the dirty parts shown) Type 1 fitted my boiler. I don't think there's any alternative to removing the right side of the valve and comparing it very carefully with the sellers' photos to ... You need to be careful to get the right kit. There are two different and non-interchangeable kits being sold by different sellers under the same 801903 part number. Assuming that they are both kits that fit this range of boilers, I guess that there must have been a change during the production run of the boilers. Type 1 has "O" rings on the brass plugs just under the head and a longer spindle on the "blunt" (non- "O" ring) end of the bobbin. Type 2 has "O" rings further down the brass plug and a shorter spindle on the blunt end of the bobbin. (See the photos - I had to get another kit that matched the dirty parts shown) Type 1 fitted my boiler. I don't think there's any alternative to removing the right side of the valve and comparing it very carefully with the sellers' photos to ensure that you get the right kit. You may be wondering whether you can fit the kit without removing the sanitary block from the boiler (as I was). You can. Switch off the large CH valves and the incoming cold water feed and drain the boiler using the little black circular tap and a short length of hose on the small hose connector. It's only a few pints of water but best not caught by the circuit board! Then disconnect the leads from the water pressure sensor and the actuator and separate the actuator from the valve by removing the large spring clip. Juggle the actuator over the pressure sensor and out. That gives access to the right side of the valve. Water pump pliers are good for removing this as it's got four flats, not six. You can just about get at the left side without removing anything but it's easier if you remove the small bore pipe that goes across the front. Make sure you don't lose any of the spring clips! The left side needs a 19mm (or probably 3/4" if you have one) spanner. A ratchet spanner works really well. When replacing the parts on the left, put the castellated plastic piece in first, castellations first. Then assemble the plastic spring seat and the spring on to the plug and put that in, making sure that the spring doesn't fall off on the way in. That's the hardest bit done. Then build up the right side with the "O" ring end of the bobbin going in first. There should be about 5mm of spindle protruding into the counter-bore on the right side brass plug. Put the other stuff back on and re-pressurise. If you get an F9 (or is it F7?) fault when you switch on, the connector on the pressure sensor is not in the right place. It's not a very positive location. The quality of the threads on the brass plugs is not great in these kits but the sealing is done by the "O" rings, so I think they're adequate.
Verified purchase: YesCondition: NewSold by: traders_boilers
by oisa5
10 Jan, 2017
Sorry this was a poor product
I am sorry to say this product did not live up to expectation. My valve had developed a leak at the seal. Not knowing what was wrong I ordered this whole kit. On removal I found the seal had failed but chose to replace the plunger section as well. First problem was the circlip would not fit. I found the machining on the plug has not been finished and I had to saw the boss section to get clearance. I then could get the clip in. I then fitted it all back. The leak was fixed but then plunger jammed inside not allowing hot water. I chose not to waste any more time. I cleaned my plunger and just used the boss with the new seal. Put evrything back and all worked. So all in all, not very good. At least the seal was good and that was all I needed.I am sorry to say this product did not live up to expectation. My valve had developed a leak at the seal. Not knowing what was wrong I ordered this whole kit. On removal I found the seal had failed but chose to replace the plunger section as well. First problem was the circlip would not fit. I found the machining on the plug has not been finished and I had to saw the boss section to get clearance. I then could get the clip in. I then fitted it all back. The leak was fixed but then plunger jammed inside not allowing hot water. I chose not to waste any more time. I cleaned my plunger and just used the boss with the new seal. Put evrything back and all worked. So all in all, not very good. At least the seal was good and that was all I needed.
Verified purchase: YesCondition: NewSold by: heatpack191
by fonzwel
20 Dec, 2017
The part was too big
This part was not the correct size. My Boiler engineer had to go to another store whilst trying to fit the part to buy another 30 CI gloworm. The main valve was about 2mm too big so would not fit in place. This left me out of pocket.
Verified purchase: YesCondition: NewSold by: heatpack191
by spannaz
30 Oct, 2018
Dont waste your time..
Waste of time - the valve rod part doesn't fit the boiler stated in the listing, parts missing, two hours wasted trying to install parts that cant fit, and two weeks to get refund. Not good enough.
Verified purchase: YesCondition: NewSold by: boilerparts247
by stelmini
07 May, 2019
Pleased with the service and product
Well made and easily fitted
Verified purchase: YesCondition: NewSold by: boilerparts247

Shop by category

Picture 1 of 1

Glowworm 24CXI 30CXI 38CXI Diverter Valve Repair Kit 2000801903 Was 801903

Shop with confidence

Item specifics

Item description from the seller

Business seller information

Post to me

Returns policy

Payment details

sh54zad

Detailed seller ratings

Average for the last 12 months

Seller Feedback (9,471)

Product ratings and reviews

Most relevant reviews

Make sure you get the right kit!

Sorry this was a poor product

The part was too big

Dont waste your time..

Pleased with the service and product

More to explore: